The black Kupo Master Combo HD Stand is designed to hold loads up to 88.2 lb at a maximum working height of 11' using a two riser, three section design. The steel stand features a powder-coated finish and has a 1-1/8" receiver / 5/8" stud combination at its top to accommodate Baby and Junior lights and accessories. One of the legs extends and retracts to center and balance the load on uneven surfaces. The risers are spring-cushioned to avoid impact damage by gently lowering your gear when making height adjustments.

Maximum Load: 88.2 lb    Maximum Height: 134"    Footprint: 54.3"    Collapsed Length: 52"    Weight: 22 lb    Spring-Cushioned    Leveling Leg for Uneven Surfaces    Powder Coated Steel Construction    1-1/8" Receiver / 5/8" Stud

Related Questions and Answers

Q: 1. Are knobs on this stand plastic?

A: The Matthews Digital Combo Stand - 11' BH #MADDRCS uses metal knobs.

Q: 2. Are the legs 1 inch or 22mm square? I have casters for 1 inch legs and wondering if they will fit.

A: I measured the leg on mine and it is slightly smaller than 7/8 ...So I would conclude they are 22mm. Jeff

Q: 3. can you recommend a low price but quality dolly for this product?

A: Although a dolly cannot be attached to this stand, you can use a wheeled caster set such as the Kupo 80mm Brake Caster 22mm Round (Set 3), BH # KUKS940322 http://bhpho.to/2LWpP5L

Q: 4. What's the maximum weight the stand can hold?

A: The stands specifications are,Minimum Extension (Height)52.76 in (134 cm)Maximum Extension (Height)116.73 in (296.5 cm)Maximum Load22 lbs (10 kg)The load is the stand not the arm. That type of arm is not meant for very heavy items. It is more for speedlights, cards, reflectors and gobos.

Q: 5. Are two of these stands strong enough to support an 8x8 or maybe a 12x12 outdoors? I know there isn't much height, but how is the build?

A: The 369678 DIGITAL COMBO with a 349581 4.5 grip head will work as long as you do not have high gust of wind.

Q: 6. How is the Digital version different from the original?

A: The Digital Combo Stand vs. Hollywood Double Riser Combo: The Digital version has 0.88 inch square legs, instead of 1 inch square legs. Also, the Digital center column is 1.5 inches thick. The first riser is 1.25 inches thick, and the thinnest riser is 1 inch thick. The center column on a regular Combo Stand will be 1.75 inches thick, 1.5 inches thick, and the thinnest riser will be 1.25 inches thick. The legs are probably a bit shorter on the digital, but it still has a large 50 inch footprint.

Q: 7. How long is the main upright with the legs detached?

A: The turtle base has the pole about 10 inches above the ground, so just deduct that amount from the minimum and maximum height specs.

Q: 8. will a honey badger 320ws monolight fit directly on the top?

A: Yes an Interfit Honey Badger along with many other monolights can fit the top of this stand.

Q: 9. Does the large leg slide up?

A: No, this model has a turtle base and does not have a sliding leg. A turtle base is designed so the legs can come off.This model has a sliding leg but the legs are permanent, a href= http://bhpho.to/1DRRoO9 target= _blank http://bhpho.to/1DRRoO9./a

Q: 10. What is the weight of this stand?

A: 8.3kg or 18.3lbs