The 5 x 7' X-Drop Vinyl Backdrop from Westcott, in an April storm, is the ideal solution for all types of photography, including 3/4-length portraits, headshots, couples, families, product photos, videoconferencing, and more. It is made of durable and tear-resistant seamless vinyl with a nonreflective matte finish that is easy to clean with a damp sponge for when you're photographing food, pets, and children. You can use the X-Drop as a backdrop or floordrop, and it is outfitted with five grommets for mounting on the X-Drop stand system or hooks. More cost-effective and eco-friendly than a paper backdrop, it ships in a sturdy travel-friendly storage tube and rolls out flat for immediate use with no steaming required.

Matte Finish, Seamless Vinyl    Easy Sponge Cleaning    Use as Both Backdrop and Floordrop    Fits X-Drop System Stands or Hooks

Related Questions and Answers

Q: 1. Would the Canon XA55 fit in this case?

A: To fit the Canon XA55 in this case you would need to completely break it down, including taking off the XLR top handle and removing the lens hood. We do not recommend this case for the XA55 because of that. We recommend the Pelican 1500 instead, BH #PE1500FB. https://bhpho.to/2YZSOYa

Q: 2. I purchased this and it came with no assembly instructions, and their website links to instructions that are 404 Not Found. Any pointers?

A: Easiest we have found is to take legs first side by side and pull down on tripod legs to unlock. That allows spread for base. Set to width you need so height and width of tripod are same and tighten screws hand tight to lock. Build the height on each leg from bottom up then adjust height from top down and lock by tightening screws. When legs match at height you want unscrew locking screw on one end of cross bar and adjust to width you need . Twist gently to lock crossbar. Add drop and secure both ends of crossbar on legs by setting hole on top of crossbar and tightening screw to hold. To take down just remove crossbar , lower legs and collapse tripod. No need to remove screws just loosen.

Q: 3. Does the PELICAN iM2875 STORM TRAK CASE HAVE SUFFICIENT SPACE IN THE INTERIOR TO HOLD ALL THE ITEMS NEEDED FOR ASTROPHOTOGRAPY USING THE CGEM II 9.25? SHOULD PADDING BE PURCHASED WITH THE CASE?

A: The Celestron CGEM II 925 will fit in the Pelican iM2975 Storm Trak Case (Black). You will need to purchase the Pelican Foam Set (8 Piece) B&H # PEFIM2975 and cut to fit.

Q: 4. does this storm coat fit a Sony PMW X400 camera?

A: The PMW X400 is not on the list of supported devices. Following is that list: Sony BVW-D200, BVW-D300, BVW-D400, BVW-D600 camcorder Sony DNW7, DNW709WS, DNW7P, DNW9, DNW90, DNW90P, DNW90WS, NW90WSP camcorders Sony DSR-130P, DSR-135P camcorders Sony DVW-700, DVW-707, DVW-709WS, DVW-790WS, DVW-970 camcorders Sony DXC-537, DXC-637, DXC-D30, DXC-D35H, DXC-D35L, DXC-D35WS, DXC-D50 camcorders Sony HDW-700, HDW-730, HDW-730S, HDW-750, HDW-900, HDW-F900 camcorders Sony MPEG-50 camcorder Sony MSW-900, MSW-900P, MSW-970 camcorders Sony PDW-510, PDW-510P, PDW-530 camcorders Sony UVW-100 camcorders

Q: 5. how long can be the crossbar?

A: I've never pulled it out all the way and measured, but it's advertised as 12.5 feet. I use 107 background paper and don't extend the pole nearly as far as it can go.

Q: 6. Does it ship to Japan?

A: Yes, the Photoflex Pro-Duty Backdrop Support Kit (12.5' Width) may be shipped to Japan.

Q: 7. Does this stand come with the sheet or do I need to buy that? If so, any recommendations?

A: Mine did not come with a back drop sheet. as for as recommendations you will need to decide what you want either cloth or paper. I use cloth and have a few different ones from different manufacturers. I would suggest at least one black color then it is up to the look you want to achieve. I happen to like the Wescott brand but I'm sure any is ok.

Q: 8. Are the stands in this kit air cushioned?

A: No, these stands are not air-cushioned. Also, the tightening action of the clamps is less than desired. We've been using them, and they suit our purpose, but I wish I had spent more on a superior set of stands. Hope this info is helpful.

Q: 9. Is this better or worse than the Manfrotto Free Standing version? The price is about the same.

A: This unit can go to 12 feet high and 12 feet wide. The Manfrotto you mentioned https://bhpho.to/2V3hcr7 is 7.7' high and 9 feet wide. The build quality of both systems is good.

Q: 10. Does the vinyl train also fit the 7x8 Hi-liter?

A: Yes. The following unit will accommodate both 7x8 and 6x7 models.