In Ear Monitoring Sennheiser

Sennheiser Sr 2050xp Iem Rackmountable Dual Wireless In-ear Transmitter (gw1: 558 To 608 Mhz)

Product Code: ga192767
Availability: In Stock

$5,397.00 $7,879.62

Qty

0 reviews Write a review

Description
Reviews (0)

The Sennheiser SR 2050XP IEM is an easy-to-use rackmount wireless transmitter with professional features for enhanced reliability and control. It gives you two stereo channels of in-ear monitoring without troublesome cables or monitor speakers required and can also be used for any application where talkback signals need to be transmitted.

The SR 2050XP IEM offers selectable 10/30/50/100mW RF power output for overcoming interference in difficult RF environments, a wide 50 MHz tuning range with 2000 frequencies to find a clean channel, Ethernet networking for control and monitor from a computer, and an intuitive, menu-driven interface with a backlit LC display. The system delivers high-quality audio monitoring to presenters, clergy, lecturers, and performers working in business and educational settings, houses-of-worship, theaters, or on musical stages.

The dual transmitter features two discreet Ethernet (RJ45) ports for network-based remote monitoring and control using the Sennheiser Wireless System Manager (WSM) software (free download available separately). Using your Mac/Windows computer, the software allows you to quickly coordinate frequencies in multi-channel setups, display audio levels at the receiver, battery status, and more.

The rugged SR 2050XP IEM is made of metal and can be mounted into a standard 1 RU 19" equipment rack without additional hardware. To mount the antenna connections to the front of the rack, the GA 3030 AM antenna front-mount kit is required (available separately). The unit features a built-in 110-240V auto-switching power supply and comes with three types of power cords (US, UK, EU), great when touring internationally.

The SR 2050XP IEM is compatible with EK 2000 IEM bodypack receivers.

Two Channels of Stereo Wireless IEM 2000 Auto-Scan Frequencies Ethernet Connectivity/Computer Control 10/30/50/100mW RF Output Power

Parameters
Modulation	Wideband FM Stereo (MPX Pilot Tone)
Frequency Band	GW1: 558 to 608 MHz
Number of RF Channels	2000 20 x Frequency Banks, Each with Up to 32 Factory-Preset Channels, No Intermodulation 6 x Frequency Banks with Up to 32 Programmable Channels
Switching Bandwidth	GW1: 558 to 608 MHz
Nominal/Peak Deviation	±24 kHz / ±48 kHz
MPX Pilot Tone	Frequency/Deviation: 19 kHz / ±5 kHz
Frequency Stability	±10 ppm
Antenna Output	2 x BNC Sockets, 50 Ohms
Auto Channel Selection	Yes
IR Sync	Yes
RF Output Power	Low: 10 mW Standard: 30 mW High: 50 mW Maximum: 100 mW (At 50 Ohms, Switchable)
Compander	Sennheiser HDX
Frequency Response	25 Hz to 15 kHz
Audio Inputs	2 x BAL AF IN L (I): XLR-1/4" / 6.3 mm Jack Combo Sockets, Electronically Balanced 2 x BAL AF IN R (II): XLR-1/4" / 6.3 mm Jack Combo Sockets, Electronically Balanced Headphone Output: 1/4" / 6.3 mm
Input Level	+22 dBu Max.
Audio Outputs	2 x Loop Out Balance L (I): 1/4" / 6.3 mm Stereo Jacks 2 x Loop Out Balance R (II): 1/4" / 6.3 mm Stereo Jacks
Headphone Output	>100 mW at 32 Ohms With Volume Knob
Ethernet	2 x RJ-45 Ethernet Ports
Display	Backlit LCD: Current Frequency, Frequency Bank and Channel Number, Metering of AF Level, Transmission Status, Transmission Power, Equalizer Setting, Input Sensitivity, Lock Status
Total Harmonic Distortion	<0.9 %
Signal-to-Noise Ratio	>90 dB
Temperature Range	14 to 131°F / 10 to +55°C
Power Supply	100-240 VAC, Auto-Switching, Built-In
Current Consumption	0.2 A
Material of Construction	Metal
Dimensions	8.5 x 19 x 1.7" / 21.7 x 48.3 x 4.3 cm, Approximately
Weight	6 lb / 2.7 kg, Approximately
Packaging Info
Package Weight	8.38 lb
Box Dimensions (LxWxH)	21.2 x 11.9 x 5.8"

Easy setup with automatic frequency scan function and IR sync with receivers
20 fixed frequency banks, each with up to 32 compatible frequency presets (no intermodulation) and 6 user banks with up to 32 user-programmable frequencies
Switchable 10/30/50/100mW RF power output for versatile use
Headphone jack with volume knob to monitor your audio right from the front panel
Integrated 5-band EQ and enhanced low-end frequency response
Receivers can be configured from the transmitter menu
Monitoring and control using Sennheiser WSM computer software (Mac/Windows)
User-friendly menu operation with a backlit graphic display
Display shows current frequency, frequency bank and channel number, metering of AF level, transmission status, transmission power, equalizer setting, input sensitivity, and lock status
Loop I/Os allow you to daisy-chain an audio signal that is to be transmitted to all receivers from the mixing console to one transmitter and then to the other transmitters
Pilot tone squelch for eliminating RF interference
Sturdy metal housing with integrated 110-240V power supply unit

Related Questions and Answers

Q: 1. my dualview monitor screen is broken can I get it fixed. thank you

A: Contact BlackMagic Design. It is probably more expensive to repair than just replace. But only BMD can provide a real answer.

Q: 2. I travel producing video for events and I have been using smaller tvs for multiview but keep breaking them. Would this unit be sufficent for multiview? I'd use the other output for program or to monitor aux. I'm using an atem tv studio.

A: Yes, the Blackmagic Design SmartView Duo Rackmountable Dual 8" LCD Monitors are sufficient for multiview and program out.

Q: 3. Does this monitor have the ability to show the waveform of the SDI input?

A: It does not, this monitor does not offer wave forms.

Q: 4. How does this work withy the Atem television studio hd? U want to have my camera angles on one screen and the live on the other?

A: You can use it anyway you like. As a preview/program monitor, as a monitor for multiple sources, or as an aux output. Check out the tech specs for the Television Studio HD and note the outputs. Any of these outputs can go to these monitors.https://a href= http://www.blackmagicdesign.com/products/atemtelevisionstudiohd/techspecs target= _blank www.blackmagicdesign.com/products/atemtelevisionstudiohd/techspecs/a

Q: 5. Is this recommended for use as field monitors for on-location shoots? Any options to power it on batteries? I need a monitoring solution for a 2 camera set-up shoot.

A: If you're so into high resolution and brightness it schould do the work. For the powering you should find a power converter that does the job in combination with AB or IDX batteries

Q: 6. Does this take 12g sdi?

A: Yes and No. The only difference between 12G 6G or 3G is the bandwidth. for example 12G is capable of up to 4K60p 6G is capable of up to 4K30p and 3G is capable of up to 1080p60p. 12G devices will work with this monitor as long as you send a resolution/frame rate that is supported by the monitor. Here is a list of resolutions/frame rates supported by this monitor: 576i 480i 720p: 50/59.94/60 1080i: 50/59.94/60 1080PsF: 23.98/24/25/29.97/30 1080p: 23.98/24/25/29.97/30/50/59.94/60 DCI 2K: 23.98/24/25

Q: 7. Can I use this display as a monitor for my Mac mini?

A: This would not make a good monitor for a computer desktop. You would need HDMI to SDI converters and the resolution would need to match. And quite small for a desktop.

Q: 8. I have a unique mounting need and would like to have either a VESA or baby pin out of the center/back. Any hardware solutions?

A: The Blackmagic Design SmartView Duo Rackmountable Dual 8" LCD Monitors can only be mounted the way it is designed to.

Q: 9. Is this compatible with 4K video? If so, does it scale the video to fit the screen?

A: The SDI inputs for this device are HD 3G-SDI. If you want to input 6G 4K video, you should consider this product, the Smartscope Duo 4K. : a href= http://www.bhphotovideo.com/c/product/1007197-REG/blackmagic_design_hdl_smtwscopeduo4k_smartscope_duo_4k.html target= _blank http://www.bhphotovideo.com/c/product/1007197-REG/blackmagic_design_hdl_smtwscopeduo4k_smartscope_duo_4k.html/a

Q: 10. Can I connect using dtap cable? If so what barrel do I buy?

A: it is a 2.5x5.5mm barrel. a D-Tap cable will work as long as it is regulated to 12 Volts.

There are no reviews for this product.