Available for download, the Slate Digital FG-A is a plug-in that emulates the tone, curves, and circuitry of a coveted American Class-A equalizer. As with the original hardware it models, the EQ sports three bands of EQ centered around fixed frequency points. Low- and high-pass shelves can be instantiated with virtual push-buttons, and the output stage can be driven harder for more saturation.

However, there are some modern touches that separate it both from the hardware and other EQ recreations of this piece. For instance, you can switch the opamps in and out of the signal path. Also, a fourth midrange band has been included for your convenience. Finally, you can switch the EQ into a continuously variable mode for both its gain and frequency selector knobs. You're no longer relegated to 2 dB steps; you can go finer if you want, and you can pinpoint any frequency center within a given range.

The module operates within the VMR (Virtual Mix Rack) plug-in. When you want to use it in your DAW, simply instantiate the VMR plug-in, and you'll be able to access the FG-A, as well as any other VMR plug-in for which you currently own or subscribe. The Slate FG-A is Mac and Windows compatible. The EQ can operate in VST, AU, and AAX formats. An iLok 2 or 3 is required to run the EQ.

Recreation of Classic American Equalizer    4-Band Parametric EQ    Switchable Low-/High-Pass Filters    Switchable Opamp Modeling    Output Knob for Level & Character    Optional Continuously Variable Gain    Optional Continuously Variable Frequency    Operates within Slate Digital VMR    Mac & Windows Compatible    Operates with AU, AAX, and VST Formats

Related Questions and Answers

Q: 1. Is this for 3.5" or for 2.5" drive?

A: this enclosure is Compatible with 2. 5-Inch SATA SSDs and hard drives (up to 15mm)

Q: 2. Is the Oyen Digital MiniPro 2.5" SATA to USB 3.1 Type-C External Drive Enclosure backwards compatible, USB 2.0?

A: Yes, the enclosure is backward compatible with USB 2.0, but using an older version of USB than intended will result in lower speeds.

Q: 3. will the Celestron 93665 work with a nexstar 6 evolution?

A: Yes it works with the NexStar 6/8SE Evolution Telescopes.

Q: 4. I need a single transmitter that can xmit two individual channels to L & R stereo spkrs. I do NOT want a mono signal going to each spkr. These are Dolby ATMOS HT effects sprks and require discrete signals. So, believe it requires dual wireless xmit freqs? Not exactly sure what the technical solution looks like, will the Wi Digital WI-AMP50X8 fulfill this rqmt?

A: The Wi Digital system: https://www.bhphotovideo.com/c/product/1361205-REG/wi_digital_wi_amp50x8_wi_pro_audiomatrix_x8.html/specs is stereo to each speaker. This system will send separate left and right signals to individual receivers, one to each speaker. https://www.bhphotovideo.com/c/product/1247921-REG/alto_stealth_wireless_system_kit.html

Q: 5. Does this include ASMedia 1053E Chipset or ASMedia 1153E Chipset?Is this product's model name U32-M or U32M-BK ?Would like to confirm the version that you are selling.

A: The Oyen Digital MiniPro that we offer is MFR # U32-M with a ASMedia 1053E (with UASP) chipset.

Q: 6. Can you daisy chain with the USB through the FireWire connection?

A: No. single usb3 connection only

Q: 7. Is there room for an iPad Air in case I'd like to take that along in the bag?

A: There is not enough space for an iPad Air .

Q: 8. One transmitter to 50 receivers simultaneously according to the specs.With multiple speakers (maybe 8-16) spread out across a fair distance will result in latency issues. Is there a way to tweak individual latency/delay to each speaker/receiver?

A: The Wi Digital X8 does not offer delay compensation. If the application demands it, a delay unit should be connected to the receiver(s) before being inputted to the speaker.

Q: 9. Does the bag have adjustable padded dividers in the main compartment?

A: The Lowepro Pro Messenger Bag 180 AW does have adjustable padded dividers in the main compartment, yes.

Q: 10. What is the power specs on the DC in Port for the Oyen Digital MiniPro 2.5" SATA to USB 3.1 Type-C External Drive Enclosure?

A: The manufacturer has not provided a spec for the power draw for this device via USB-C. However, the standard power requirement for a 2.5" SATA drive is 5V.