Capture full motion video in conference rooms, training rooms, and classrooms with the black RoboSHOT 30E HDBT IP Camera System from Vaddio. Designed with 30x total zoom and a 1/2.5" CMOS sensor, the camera delivers high-definition 1080p/60 video resolution. It features image signal processing and a wide dynamic range for enhanced lighting in dimly lit conditions. For smooth and natural motion, the camera features tri-synchronous motion technology allowing all three axes of the camera to move simultaneously. This camera can be controlled via integration-ready Telnet, serial RS-232 control, or an included IR remote control.

The RoboSHOT 12E provides a web-based user interface allowing configuration, management, and control from anywhere in the world over the IP network making this camera ideal for remote management, network operating centers, and overall IT control. Simply enter the camera's streaming URL into any standards-based H.264, RTSP format media player. This camera also allows you to simultaneously stream live events over YouTube, Livestream, and Facebook with the HDBaseT, HDMI, and IP video outputs. To simplify cabling and extend installation distance, you can connect it directly to HDBaseT-compatible devices or pair it with Vaddio OneLINK receivers.

RoboSHOT 30E HDBT IP Camera System    OneLINK Bridge A/V Interface    1080p/60 Video Resolution    1/2.5" CMOS Image Sensor    70.2° Wide Horizontal Field of View    30x Total Zoom    Power, Control, Video, and Streaming    Supports Cable Runs up to 328'    Two Balanced Audio Inputs    Single Ethernet Cable Run

Simultaneous HDBT, HDMI, and IP (H.264) streaming outputs

Full administrative control via web interface; manage remotely while monitoring the stream separately

HDMI: 16:9 (all resolutions)
IP (H.264) streaming: 16:9, 3:2, and 4:3

Back-light compensation

Auto/manual gain

Auto, ATW, indoor, outdoor, one-push, manual

Wide dynamic range

Spotlight compensation mode

Noise reduction

16 presets with custom home

Invertible

Silent BLDC direct-drive motors

Related Questions and Answers

Q: 1. Is there a way to change the Video Level Range (Legal/Full) in the Streaming Bridge through the software? Or from the ATEM Mini Pro using OBS?

A: Not through any Blackmagic Software.

Q: 2. Is there anyway to record audio with this device ?

A: There are currently no audio recording options defined by manufacturer.

Q: 3. The MVH 502AH fluid video head comes with two 3/8-inch accessory attachment points, one on each side of the bridge. How do these attachment points work when the Kirk replacement bridge is installed?

A: Please e-mail us: askbh@bandh.com or call:

Q: 4. Are the HDMI and SDI outputs active at the same time? For instance can I send the SDI 1 to a monitor, while sending HDMI to a recorder simultaneously?

A: Yes the outputs are active all the time.

Q: 5. We utilize an ATEM Mini Pro in our studio and then connect with USB C to use as a webcam for clients events like Zoom/ Webex etc that have to have the usb c direct plug in to recognize the camera. I want to record the ATEM Program output but currently can't do that. Could a ATEM Streaming Bridge record for me instead?

A: the ATEM streaming bridge can be used to provide an extra HDMI program output that can be recorded on any external HDMI recorder. The streaming bridge does not record anything itself internally, it just provides you with another HDMI output that you can record or use with an external TV monitor.

Q: 6. The Watson NP-F770 Lithium-Ion Battery Pack is recommended for this item. Do I need to buy also the battery charger separately?

A: You will need to purchase a charger as well for the NP-F770 battery. We have a kit which includes the NP-F770 and a charger, BH #WANPF770CK. https://bhpho.to/2kuUtjl

Q: 7. With ATEM Mini Pro, can I simultaneously use ATEM HDMI for multi-view, USB-C for recording, and ethernet for *both* software control (from PC), and driving this device for streaming?

A: Yes to all.

Q: 8. We use the usb c for a webcam for feeds to zoom and other meetings. Can I use the bridge then to record or send to a computer that could record the event that way?

A: The ATEM Streaming Bridge doesn't have recording capabilities. If you send your ATEM Mini Pro's program feed over ethernet to the ATEM Streaming Bridge, you'll need a capture device to get the HDMI or SDI output into the computer for recording.

Q: 9. Does this device allow me to remotely control and switch cameras on the atem from a completely different location?

A: No, you cannot control or switch cameras on the ATEM from this device.

Q: 10. Related to a hardware functionality question on the Pro, will it be possible via firmware update to send a single fixed input to this device through Ethernet, and a switched program out through USB?

A: We can't predict if Blackmagic would be allowing that. For right now, this will just allow you to convert the IP signal into SDI and HDMI video.