Stability, rugged construction, flexibility, and control are hallmarks of the LitePanels Gemini 1x1 Soft RGB LED Light Panel with Standard Yoke and US Power Cord. The aluminum-constructed, 12.6 x 12.6 x 4.6" RGBWW fixture has multiple lighting modes including CCT, Hue, Saturation, Gel Presets, as well as an effects mode. The CCT color temperature control has six factory presets in increments from 2700 to 10,000K. There are also six presets for user-defined color temperature and plus/minus green control. The HSI Color mode allows you to adjust the hue, saturation, and intensity, while Gel mode permits your choice from a library of filters favored by filmmakers, and an effects mode provides nine different effects to work with. The light has a CRI/TLCI rating of 97 for daylight balance and 94 for tungsten balance, indicating an accurate rendition of color. The Gemini is dimmable from 100 to 0.1% without flicker or color shift, and settings and features are displayed on the rear LCD screen.

All of these adjustments can be made locally on the unit or remotely via a console, thanks to the Gemini's built in DMX. There's even the option of wireless DMX or Bluetooth control via a separately purchased remote module. The Gemini is ready for worldwide use, thanks to its built in 100 to 240 VAC power supply but it can also run on batteries when power is unavailable.

The Gemini has a number of convenience features, such as the ability to stack and gang several lights together with an optional yoke and hardware. You can also daisy-chain multiple lights together in Master/Slave mode, allowing a single designated "Master" light to control the others. This version of the Gemini ships with a standard yoke and a US power cable.

For Studio & Film/TV Production    Output: 614 Lux at 3.3' (5600K, 95°)    2700 to 10,000K; CCT RGB Control    12.6 x 12.6"; AC/DC Operation    CRI 97 | TLCI 94    Fan Cooled with Quiet Mode    On-Board Controls    Optional DMX, Wireless DMX, Bluetooth    Includes Standard Yoke, Power Cord    Includes Diffuser Panel

Similar in design to the Gemini 2x1, the LED layout has been reconfigured with the Gemini 1x1, which allows it to create 60% of the output of the Gemini 2x1. The beam angle is 95° with a field angle of 157°.

Using a single 14.4 VDC battery allows the fixture to function at 90% brightness, Using two batteries or the included power supply allows the light to function at 100% output.

AC/DC power with DC battery power via 3-pin XLR

The fan is extremely quiet, and it is on by default. However, you can disable the fan in the menu. Please note that disabling the fan cuts the fixture's output to 50% maximum. Fan modes accessible through the menu system allow you to adjust when the fan will start, which allows for the light to operate for a limited time without the fan.