Wifi Range Extender Drops Signal

Shure Twinplex Tl46 Omnidirectional Lavalier Microphone (ta4f, White)

Product Code: ga193344
Availability: In Stock

$1,197.00 $1,903.23

Qty

0 reviews Write a review

Description
Reviews (0)

Sweat and moisture won't stop your signal when you use the white Shure TwinPlex TL46 omnidirectional lavalier microphone as your transducer of choice. This ultralightweight mic boasts a patent-pending, dual-diaphragm condenser capsule with an omnidirectional polar pattern, yielding full, natural tone and consistent off-axis response along with low self-noise and wide dynamic range. Plus, the swappable frequency caps incorporate a superhydrophobic nanoscopic coating to eliminate sweat-outs and signal drops caused by perspiration.

The TwinPlex TL46 remains easy to conceal while offering the sonic performance of mics with much larger diaphragms. Its high sensitivity produces a high signal-to-noise ratio with 8 to 10 dB of additional output level. The paintable, medical-grade, 1.6mm diameter cable resists kinks, maintains flexibility, and uses a redundant ground for enhanced shielding. The cable end is terminated with a 4-pin TA4F mini-XLR connector for compatibility with an array of wireless transmitters.

For Theater, Broadcast & Speech Lightweight and Easy to Conceal Omnidirectional Polar Pattern Consistent Off-Axis Response Natural Tone with Robust Low Frequencies Low Noise and Wide Dynamic Range Swappable Sweat-Resistant Frequency Caps High Sensitivity, High Signal-to-Noise Paintable Cable with Enhanced Shielding TA4F Mini-XLR Connector

Key Specs
Polar Pattern	Omnidirectional
Power Sources	Plug-In Power
Color	White
Microphone
Polar Pattern	Omnidirectional
Included Tone/Pattern Caps	No
Performance
Frequency Response	20 Hz to 20 kHz
Maximum SPL	134 dB
Sensitivity	-37 dBV/Pa (at 1 kHz)
Dynamic Range	110 dB
Equivalent Noise Level	24 dB (A-Weighted)
Connectivity
Analog Output	1x TA4F/Mini-XLR 4-Pin Female
Cable Length	5.5' / 1.68 m
Cable Diameter	0.063" / 1.6 mm
Power
Power Sources	Plug-In Power
Operating Voltage	5 V
Physical
Color	White
Environmental Resistance	Water-Resistant with Included Housing (Unrated)
Dimensions	ø: 0.22 x L: 0.53" / ø: 5.6 x L: 13.5 mm
Weight	0.42 oz / 12 g
Packaging Info
Package Weight	0.085 lb
Box Dimensions (LxWxH)	6.35 x 4.75 x 0.85"

Lightweight and easily concealed for use in theater, broadcast, and speech applications

Patent-pending, dual-diaphragm design yields twice the surface area of other subminiature microphones for pristine, natural response, and robust low frequencies

Improved off-axis consistency produces accurate reproduction regardless of vocal source position or movement

Low self-noise of 24 dBA and wide dynamic range of 110 dB for cleaner audio production

High sensitivity produces 8 to 10 dB of additional output level, and contributes to a high signal-to-noise ratio

Interchangeable sweat- and moisture-resistant frequency caps prevent sweat-outs due to an invisible superhydrophobic nanoscopic coating

Paintable 1.6mm diameter cable resists memory effect and kinks

Dual-redundant ground in cable serves as secondary shield for longevity

Includes three flat-response frequency caps and two presence-response frequency caps

Related Questions and Answers

Q: 1. Will this work with DJI Mic wireless system?

A: The DJI Mic Wireless System does not connect properly to mics such as the TASCAM TM-10LB Lavalier Microphone for DR-10L Digital Recorder which have a locking connector. Unfortunately the transmitters' plastic shells extend too far to allow a firm connection with a locking connector.

Q: 2. Can you connect the TM-10LW to Rode wireless Go ii?

A: The TASCAM TM-10LW Lavalier Microphone has a locking 3.5mm TRS male connector and the Rode Wireless GO II Transmitter has a non-locking 3.5mm mic input. Although the mic will not be able to lock onto the input connector with the locking ring, the mic will still connect to the transmitter.

Q: 3. Does this work with the iPhone 6?

A: The Polsen MO-PL1 connects via the headphone jack of the iPhone and is compatible with all current models.

Q: 4. Can I plug another S20 into the input, flip the switch to S and record stereo?

A: Yes, a SmallRig Forevala S20 Shotgun microphone can be connected to the external mic input on a second SmallRig Forevala S20 mic using 3.5mm TRS cable in order to record two channels of audio and output a single stereo signal to your camera.

Q: 5. will Polsen MO-PL1 work with moto x android phone?

A: It is compatible with most Android devices (CTIA/AHJ compatible) and other mobile devices. There is a very good chance that it will perform well with your Motorola device.

Q: 6. How do you name files

A: Just remove the mini sd card, insert it into the computer of your choice, then name your file.

Q: 7. Using the camera on a new iPad to record video, is there any way to make sure the audio is recording? I need to record a 30 minute interview and want to make sure I'm getting good audio. Will the headphone let me hear what is being recorded, or is there any other way to monitor the audio signal?

A: Yes it will. There are two microphone inputs as well as a headphone output for monitoring through headphones with that Rode adapter that comes in the kit.

Q: 8. Does it work with Tascam DR-40?

A: It will work with the DR10 if using an XLR adapter that will drop 48V phantom power to plag in power. Like this: https://www.bhphotovideo.com/c/product/387850-REG/Rode_VXLR_VXLR_Mono_Mini_Jack.html?sts=pi&pim=Y

Q: 9. Are the built in microphones on this unit better than the one's on the original H1?

A: Yes, the microphone quality was improved with the H1n.

Q: 10. Is there a tripod screw mount?

A: Yes there is.

There are no reviews for this product.