The Godox X2 2.4 GHz TTL Wireless Flash Trigger is dedicated to Sony's TTL system and operates on a 2.4 GHz frequency. The wireless flash trigger can fire a single flash or multiple dedicated flash units within 5 groups, 32 channels, and 99 ID settings to avoid interference from other nearby systems. For the added convenience, the integrated scan setting function can help you automatically locate an ID channel with the least interference. You can also operate the flash units within a wireless range up to 328'.

All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons. A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord. The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth. The app can control the same functions as the wireless trigger such as the flash mode, power output, the modeling light, high speed sync, and the audible beep of Godox flashes.

Wireless Transmitter for Flash    Frequency: 2.4 GHz, 32 Channels    Wireless Range: 328.1'    High Speed Sync up to 1/8000 sec    3.5mm Sync & USB Type-C Port    Large LCD Display with Control Dial    iPhone or Android Compatible Godox App    Bluetooth Through Smartphone or Tablet    Backlit LCD, Group, and Function Buttons    Hot Shoe Quick Lock

The wireless trigger, which operates on a 2.4 GHz frequency can fire multiple flash units within 32 channels and 99 ID settings, so there is no interference from nearby systems.

You can control flash functions such as the flash mode, power output, the modeling light, high speed sync of 1/8000 sec, and the audible beep of Godox flashes while operating the flash units within a wireless range up to 328'.

The integrated scan setting function can help you automatically locate an ID channel with the least interference.

All the settings are easily viewed on the trigger's large LCD display, which can be backlit along with the group and function buttons.

A USB Type-C port is located on the side of the wireless trigger to download firmware updates as is a 3.5mm sync socket to connect non-TTL flashes or to fire cameras via a remote camera cord.

The downloadable GodoxPhoto app is compatible with iPhone or Android smartphones or tablets while operating the triggers via Bluetooth.

The hot shoe Quick Lock ensures that the wireless trigger stays secure on the camera's hot shoe.

Related Questions and Answers

Q: 1. Can I use a non-Godox flash in the on camera hot shoe while using a Godox remote flash? I have a Nissin i400 for Fuji. If so, will any Fuji compatible flash work?

A: You can use any flash in the shoe. The level of functionality will vary with the unit used.

Q: 2. Is it compatible with the Canon 5D Mark III? And with the Godox MS300?

A: Yes that combination will work.

Q: 3. Is the Godox X2T-C a Transceiver or just a transmitter with the need of receivers like the Godox X1R-C?

A: The X2 is a transmitter. It can communicate with the built in receivers on most Godox or a X1 receiver.

Q: 4. I have 3 Godox speedlights and an X2 for my Fujifilm system. If I purchased an X2 for my Nikon would the Fuji speedlights operate with the Nikon trigger? If yes, are there limitations?

A: Most Godox speedlights off camera will take commands from any Godox transmitter so you can use them and even get TTL and HSS. Its the transmitter that must match the camera type.

Q: 5. Will this fire a SB800 flash?

A: This will work with an SB-800 only if you have the X1R-n receiver under the flash.

Q: 6. Will this fire an Olympus flash?

A: The Godox X2 2.4 GHz TTL Wireless Flash Trigger for Olympus and Panasonic will not work with Olympus brand flashes.

Q: 7. Does the Godox x2t have low light focus assist beam for Sony a7 cameras?

A: Yes the AF assist beam would be available for Sony A7 series cameras.

Q: 8. Will this transmitter operate with TT685N flashes in TTL mode properly, including A:B:C ratios?

A: Yes, all radio based on a 2.4 gig frequency, for more flexibility and better end-user experience we highly suggest the following commander for full control of the Godox echo system. Godox XProC TTL Wireless Flash Trigger for Canon Cameras BH #GOXPROC • MFR #XPROC https://www.bhphotovideo.com/c/product/1369139-REG/godox_xproc_wireless_flash_transmitter_for.html

Q: 9. Is this compatible with the new Canon EOS RP?

A: Yes this is compatible with a EOS RP.

Q: 10. What do I need to keep a speed light on the body, but also wirelessly operate other speedlights? Would I need one for the camera, and one for each additional speedlight?

A: this depends on the speed light you are using. If it has a transceiver built in this would be the best option.for example godox v860iin https://www.bhphotovideo.com/c/product/1341867-REG/godox_v860ii_f_nikon_kit_v860ii_for_nikon_kit.html