The HBYATC-L-7-35W Breakout Y-Cable from Ambient Recording features the mixer-side Y-cable for a Sound Devices 664 mixer-camera loom. At one end of this Y cable is a 7-pin XLR connector. On the other end are two XLR connectors, one 3.5mm TRS, and a 5-pin Lemo connector.

7-pin XLR male to dual 3-pin XLR female

Mono return via 3.5mm TRS right angle

5-pin Lemo (TC-OUT) connector for timecode

To be used in conjunction with the HBS7-7 camera loom and HBY7TC-35, HBY7TC-35W, or HBY7TC-5 camera-side breakout cables

Related Questions and Answers

Q: 1. What's the different between the MkII and the original ASF-1?

A: The molding around the case of the mic has been redesigned.

Q: 2. would this work to jam sync between a timecode solutions UltraSync one and a dji osmo Pocket 3?

A: Theoretically, you can use the Sound Devices BNC to USB-C Timecode Cable for A20-Mini to jam sync the Atomos UltraSync ONE RF Timecode Sync for AtomX Sync and Ninja V with the DJI Osmo Pocket 3. However, according to DJI, they have not specifically tested if timecode via BNC will pass through the USB-C port of the Osmo Pocket 3.

Q: 3. what the it can to mixpree 10 ii?

A: The PortaBrace Sound Devices 664 Audio Mixer Combination Case would not be recommended for the Sound Devices MixPre-10 ii; the PortaBrace Silent Audio Organizer Bag for Sound Devices MixPre-10T Recorder (BH #POAOMIXPRE10) would be recommended instead.

Q: 4. Would this cable work with the Shure Ad1 lemo transmitter?

A: The Ambient Recording 3-Pin XLR Female to LEMO 3-Pin Compatible Connector Adapter (B&H # AMAKXLR3FL33) has the ground on pin 1, the power (bias voltage) on pin 2, and the audio signal on pin 3. This is the same pin configuration as the Shure AD1 Digital Wireless Bodypack Transmitter with LEMO3 (G57: 470 to 616 MHz), B&H # SHAD1LEM3G57.

Q: 5. Will this work with Sennheiser SK 6000?

A: Yes, the Ambient Recording AK-XLR3F-L3 Balanced 3-Pin XLR Female to 3-Pin LEMO Adapter Cable is compatible for use with the Sennheiser SK 6000 Digital Wireless Bodypack Transmitter.

Q: 6. Will this cable work for Sound Devices 633 to act as master and feed the TC-1?

A: No, the Deity Microphones C20 Right-Angle Locking 3.5mm TRS to Right-Angle 5-Pin LEMO Timecode Cable is compatible for feeding timecode from the Deity Microphones TC-1 Timecode Generator into the Sound Devices 633 Digital Recorder. The TC-1 would be used as the timecode generator.

Q: 7. Dose this work with Alexa Mini?

A: This will be compatible with the Alexa Mini.

Q: 8. Is this compatible with a Mixpre10 II mixer?

A: No, this breakout cable has no application with the Mixpre10ii.

Q: 9. Is it Mono or Stereo?

A: The Ambient Recording Sound Fish ASF-1 MKII Hydrophone is mono.

Q: 10. hi does this work for red dsmc2 production module?

A: Yes, the Ambient Recording TC-SYNC Timecode and Sync Cable for Master Lockit & Lockit Compact Devices could be used to send timecode and genlock information into the RED DIGITAL CINEMA DSMC2 Production Module from a compatible 5-Pin Lemo source such as the Ambient Master Lockit.