For users of the 2F1 onboard battery system, the BlockBattery Light Stand Mount to 4-Pin XLR provides a portable 14.4V power solution with a minimum of cable clutter. Featuring an integrated Mafer stud, the adapter plate can be attached to a Mafer clamp, super clamp, and a variety of optional mounting devices, allowing it to be clamped directly to a light stand or other support. Connecting the adapter to your rig is achieved through the integrated 3' cable with 4-pin XLR connection.

For BlockBattery 2F1 Onboard Battery    14.4V Output to 4-Pin XLR    Integrated Mafer Stud    Aluminum Construction

Easily attach any of the BlockBattery 2F1 onboard series batteries to a 14.4V device

Easily mount onto any light stand, tripod, or other support with an ordinary Mafer clamp

Made of durable aluminum components for years of rugged use

Related Questions and Answers

Q: 1. What is the lumen output of the LED modeling lamp?

A: The LED modeling light is approximately 200 Lumens.

Q: 2. Im looking for a very simple solution for a strobe in a photo booth. Has anyone used this inside a photo booth and if so haw did it perform?

A: I have and I don't like it, it just burned up today. Looking for something better. The alian bee is good but it gets to hot.

Q: 3. How to put in half power and full power dose not show in instruction

A: On the Impact SF-ABRL160 Stand Mount Flash with LED Modeling Light BH #IMSFABRL160 you can switch the power level with the black switch.

Q: 4. I am having trouble getting this Impact SF-ABRL-160 to flash with my Canon 4000D. I have the cable and the PC adapter on the hot shoe. I can't get the camera to recognize the external flash. What else do i need?

A: The camera should be set to manual exposure mode and the sync cord/adapter connection should be checked to make sure they are secure.

Q: 5. What is the sync voltage to trigger this flash?

A: I plug the SF-ABRL into the wall socket which is 110 volts. I use a transmitter and receiver set up on the hot shoe of my Nikon. The receiver is connected on my main light. I set the SF-ABRL to receive the flash output from the main light. The sync voltage at this point, after receiving the flash, and setting off the flash of the SF-ABRL would need to be pretty miniscule as it is only a triggering device to make the unit flash, as the flash itself is powered by the 110 volt electric current. I do not know the sync voltage that triggers the switch to fire the flash as it is all electronic, but I'm sure you could find out by calling the manufacturer.

Q: 6. what is the purpose/benefit of having the the modeling light with the strobe?

A: Strobes are great for lighting a subject with a good white-balance that continuous lighting will provide, but with a little more difficulty. Continuous lights give you What You See Is What You Get images, which can work for what you're going for, but a strobe helps make the light source a primary source for you camera to use for white balance and exposure in general. Technology exists where you can get continuous lights to be powerful enough to light up the environment as you like, strobes help when you need a powerful light source working on top of natural light in the ambience.

Q: 7. Can this fit on a standard lightweight light stand baby pin or just a longer c-stand baby pin?

A: The Wooden Camera Ultra Quick Release Articulating Monitor Mount is designed to work with a C-Stand baby-pin. The Wooden mount would also work with many light stands with a 5/8 connection. However because a C-Stand is a much stronger option we recommend using a standard C-Stand. Works with - C-stand or stand/mount with male 5/8" Baby pin.

Q: 8. What's the power source?

A: Plugs right into the electrical outlet in the wall. 120 volt, 60 cycle AC. No batteries to run down or replace. Works great!

Q: 9. How many settings are there to reduce the light output? Thanks!

A: The fixture has a three position switch. High, low, and off.

Q: 10. Does this work with the Impact Umbrella Flash Kit? https://www.bhphotovideo.com/c/product/1262483-REG/impact_umbrella_flash_kit.html

A: You can use the stand and umbrella in that kit with the SF-ABRL160.