Increase the capacity of your WAERO or Kuminik8 system with the addition of the Duplex Digital Headset Hub from CAME-TV. Pair this wireless hub with a master headset, then link up to six slave headsets for use at ranges up to 1200'. The hub itself can be used as a headset by adding a separately available wired 3.5mm plug headphone.

Power the hub using the two included NB-6L type batteries or via the included micro-USB cable. A dual-battery charger is also included with the Duplex Digital Headset Hub. This hub unit can be used in North America and other locations outside Europe.

Requires Master WAERO | Kuminik8 Headset    Wireless Range up to 1200'    Link to up to 6 x Slave Headsets    3.5mm Port for Separate Wired Headphone    DECT Technology, GAP Compatible    Power via 2 x NB-6L Batteries or USB    15-18 Hour Runtime on 2 x Batteries    For Use in NA & Areas Outside Europe

Links to separate master headset and connects with up to six slave headsets.

Can be used as a headset with the addition of a 3.5mm wired headphone.

DECT (Digital Enhanced Cordless Telecommunications) technology and GAP (Generic Access Profile) compatible.

Power using the two included NB-6L batteries or via the micro-USB cable.

Related Questions and Answers

Q: 1. Is there a Gold Mount battery plate available for this?

A: The bottom of this system does offer 15mm rod connections. You could use a product like the IndiPRO Tools Gold Mount Battery Adapter Plate with D-Tap Output and 15mm Rod System, B&H # INGMP15MM, with it. https://bhpho.to/2bZvv96

Q: 2. Does this have a bowl too? Looks like one of the pictures shows the flat section comming out and a bowl underneath, but what size is it? 75mm? 100mm?

A: Yes, this does have a bowl. It is designed to work with heads like the CAME-TV M8 Fluid Bowl Head with Dynamic Balance and Handle, B&H # CATPM8, which has a 100mm ball. https://bhpho.to/2VULXg6

Q: 3. I'm planning to buy this mainly because my camera and lens are too heavy for me, I hope this vest will make the camera easier to carry and less heavy, but from what I've read online it's quite a workout. I'm a little worried because I'm on the skinny side. In your opinion, does this vest do a good job at spreading out the weight of the camera more evenly on your body or is even more of a workout considering the weight of the stabilizer and vest itself? Thank you!

A: This is a heavy system, but it will distribute the weight over your body. It will be a lot less strain specifically on your arms.

Q: 4. on the came tv site it says the low-shooting bracket is Included. Is It? I do not see it on the list of in the box.

A: The low-mode bracket is included. This thing is ready to go! The only thing I wish it came with was a docking plate, so that achieving dynamic balance was easier, but as is, it fits on the top of a c-stand, and is adequate.

Q: 5. Will this be able to handle a RED Scarlet W

A: Yes, the CAME-TV Pro Camera Carbon Stabilizer with Support Vest and Support Arm (B&H# CALBVL4ALBS1) could certainly handle a RED Scarlet W BRAIN outfitted with a lens and other typical accessories.

Q: 6. What cable fits the D.C. Port on the stabalizer head? Looking to go to d-tap for flexibility with power. Thanks!

A: Came-TV has not responded to our repeated inquires regarding this. At the moment, you would have to buy it to find out.

Q: 7. Does the hdmi and sdi inputs at the top of the sled transmit 4K footage from the camera to a 4K monitor/Recorder attached to the monitor mount?

A: The capability of the SDI cable is not known. However, for such a short distance, I think it has a good chance to work. You may have to run a new cabling however.

Q: 8. It's compatible for DSLR and HD Camera?Do I need special accessories for mounting DSLR and HD Camera?

A: The arms specification is 5.5 to 33.1 lb (2.5 to 15 kg). Most DSLR's barely make that minimum. My experience with Steadicams is that they work best when the weight is in the middle of the arms specifications. You may wish to get an arm that is set up for that light a weight. Otherwise, you can mount any camera you wish physically.

Q: 9. I’m confused, in the description it says it holds up to 26 pounds but in the Q&A answers many people state it holds up to 33 pounds. Could someone clarify?

A: CAME-TV has the Pro Camera Carbon Stabilizer with Support Vest and Support Arm kit rated for a 4.4-26.4lb payload.

Q: 10. does it come with a traveling bag or what is a good bag to use with the system?

A: This is what comes with this:Steadicam 2.5-15 KGSupport vestSupport ArmHDMI cableBalance weightsBattery mount baseMonitor mountHere is one possibility for case. Porta Brace RIG-4SRKOR Wheeled Rig and Camera Case with Interior Kit B&H # PORIG4SRKOR