The black E2 Unidirectional Earset Microphone with Detachable Cable and LEMO 3-Pin Connector from Countryman is an over-the-ear earset, similar to a classic E6 earset, but with a shorter boom designed to work with WisyCom wireless microphone systems. It provides suitable isolation at the mouth, but with less visibility than an E6 omni earset, and can be used to capture audio for strong speaking and vocal applications.

With an equalizing circuit built into the audio connector, the frequency response is tuned so you can experience full-bodied bass and precise highs that are warm and natural. The element, boom, and sub-miniature connector are all easily hidden on the user's face. The boom position near the ear helps to eliminate breath pops and vocal plosives on the mic. The detachable cable terminates to a LEMO 3-pin connector for direct connection to WisyCom MTP30, MTP40, MTP40s, MTP41, and MTP41s Series bodypack transmitters (sold separately).

For WisyCom Wireless Transmitters    20 Hz to 20 kHz Frequency Response    For Strong Vocals    Fits over the Ear    Includes Carrying Case    Black and White Cable Clips    Windscreen and Protective Cap

The E2 Earset redefines pure sound in a virtually invisible package. It offers better ease of use than a lavalier or podium microphone.

There are two aspects of the E2 design that make it possible to capture sound so far away from the mouth: strong off-axis rejection and precisely tuned frequency response. For on-axis interference, the frequency response tuning in the connector of the E2 allows you to fully capitalize on the proximity boosting effect of the mic to achieve even stronger isolation in the voice band.

Like the connector for the industry-standard E6, the connector for the E2 is built tougher and more water resistant than previous models.

Lower gain, for powerful vocals requiring the highest overload.

Related Questions and Answers

Q: 1. My HXR-MC2500 does not have a LANC input but it does have a REMOTE input. if I connect this to the remote input will it work as if it were the LANC input with this controller?Thanks

A: The remote is a LANC port. From the spec: 1 x LANC on 2.5 mm sub-mini. I also recommend using the Sony LANC controller. It is a few $ more, but well worth it.

Q: 2. Can someone tell how do I connect to Canon Mark II

A: The Canon C100 Mark II, B&H #CAC100EF, has a remote port on its back side. It is compatible with this LANC controller. Here is a photo that shows where the remote port is on the camera.http://bit.ly/2iNDfB4

Q: 3. Will they ever release a version without the silly light I do not want or need?

A: We are not aware of any plans for Panasonic to release a version of this handle without a light.

Q: 4. Can this unit be used with Sony PXW X200? Thank you!

A: Yes, this controller has the 8-pin connection which will make it compatible with the Sony PXW-200.

Q: 5. Planning to use with a Canon XA15. What is the second plug? I only have one LANC port.

A: The VariZoom VZ-ROCK-PZFI Zoom, Focus, and Iris Control for Select Panasonic Cameras (BH #VAVZROCKPZFI • MFR #VZ-ROCK-PZFI) is designed for Panasonic cameras, some of which require a 3.5mm LANC connection. For the Canon XA15, we'd recommend the VariZoom VZ-Rock Variable Rocker for LANC Camcorders (BH #VAVZROCK • MFR #VZ-ROCK).

Q: 6. Does this work with the Gh5?

A: No this product is not designed for the GH5. You need to use the Panasonic DMW-XLR1 XLR Microphone Adapter for the GH5.

Q: 7. Can you remap the F- and F+ buttons to something else other than Iris, like ISO or shutter speed?

A: We are not aware of any ability to remap the buttons on this controller I'm afraid.

Q: 8. Does this work with the Lumix S1H or BS1H?

A: The Panasonic VW-HU1 Detachable Handle Unit for the HC-X1500 is not compatible with the Lumix S1H or BS1H.

Q: 9. i have a sony ax 100 will this work with this camera?

A: If you get two adapter cables, yes, you can use the VZRock or any LANC zoom control to control the zoom on the AX-100. While this is awkward, it is the one workaround available. Here are the two cables. Manfrotto AV-R to LANC Cable (7.8 ) B&H # MA522AV. Sony VMC-AVM1 A/V R Adapter Cable B&H # SOVMCAVM1.

Q: 10. How long is the LANC cable that comes with this unit? Also, is it built in or does the controller have a jack where the cable plugs in?

A: Hi all. The wire is about 32 inches long. It is built into the unit. I've had gread success with it.