The black I2 Bass and Cello Microphone Kit with TA4F Connector for Sabine SW70 Wireless Transmitters from Countryman is a mic that has been built from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. It can be used to capture natural audio for this instrument.

The I2 microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and captures detail for quieter instruments. Flexible close miking techniques are aided by the bass and cello mount, which sits securely behind the bridge with a positioning arm for placement. In addition, the 5' cable is hardwired to the mic and terminates with a TA4F connector for direct connection to Sabine SW70 wireless bodypack transmitters.

Omnidirectional Polar Pattern    For Instruments and Sound Reinforcement    Hardwired Connector    Natural On & Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques are aided by the instrument mounts, which position securely and gently on the instrument for capturing audio.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning and consistent patterns.

The omnidirectional polar pattern picks up sound from all directions equally offering the flattest frequency response, lowest noise level, and is least susceptible to wind noise and vibration. It is recommended for recording and sound reinforcement of acoustic instruments such as percussion, guitar, saxophone, and piano.

Related Questions and Answers

Q: 1. Do we know what the FPS is for stills?

A: Sony ZV-E1 Mirrorless Camera (Black) is maximum 10 fps in stills.

Q: 2. What are the base iso or isos of this camera? If there are any.

A: The Sony ZV-E1 Mirrorless Camera base ISO for photo is 100 and 1,600. For video in Slog it is 640 and 12,800. ISO range is between 80 to 409,600.

Q: 3. The weight of the body is 483g without battery? With battery (100g) and card it will be ~570g?

A: The weight of the Sony ZV-E1 Mirrorless Camera is 1.1 lb / 483 g (With Battery, Recording Media).

Q: 4. (1. Does the mobile kit come with a lightning adaptor? (2. If not, is this compatible with iPhone devices via either a usb-c to lightning cable, or the included usb-c to 3.5mm, with an additional 3.5mm to lightning adapter?

A: 1. No. 2. You can use a TRRS to Lightning adapter to make it compatible with iOS like [B&H # APLAADAP].

Q: 5. Does it have a recording time limit?

A: The Sony ZV-E1 Mirrorless Camera (Black) has no video recording time limit.

Q: 6. Does this camera have the ability to pre-record video?

A: The Sony ZV-E1 Mirrorless Camera (Black) (B&H# SOZVE1B) is still (as of 3/30/2023) at the pre-release stage of its firmware, but the current version of it appears not to have the ability to begin recording prior to pressing the record button.

Q: 7. 10bit 60 S-log comes out to 600mb/s, Max writing speed on SD cards is 300Mb, am I missing something?

A: So the two units are not the same. 1 byte is made up of 8 bits. So 1MB/s = 8Mb/s. So the the video data rate is referring to the speed in bits rather than bytes. 600Mb/s is 75MB/s so you need a SD card with minimum write speed of at least 75 MB/s.

Q: 8. How long can I record at 4k 30?

A: The Sony ZV-E1 Mirrorless Camera with 20mm f/1.8 Lens Kit (Black) does not have a video clip limit. You are only limited by the size of the memory card and the battery life.

Q: 9. Is there a foam cover available that will fit this?

A: Yes. Rode offers: ROINTERVIEWG

Q: 10. Will this work with Hollyland Lark?

A: No, the SmallRig Telescoping Interview Handgrip for Rode Wireless GO is designed specifically for use with the Wireless GO transmitter which is slightly larger than the Hollyland Lark transmitter. The Rode Wireless GO transmitter is 1.7 x 1.8 x 0.7" ( 44 x 46.4 x 18.5 mm) and the Hollyland Lark transmitter is 1.5 x 1.5 x 0.7" (37 x 37 x 17 mm).