Designed for use with PT-MZ16K, PT-MZ13K, and PT-MZ10K LCD laser projectors, the ET-EMW200 10.8-12.52mm Zoom Lens from Panasonic enables you to vary the projection distance by adjusting the focal length. The lens offers a focal range of 10.8-12.52mm and an aperture range of f/1.84-2.14, providing a throw ratio of 0.48-0.55 in 16:10 or 16:9 mode and 0.58-0.66 in 4:3 mode.

For PT-MZ16K/MZ13K/MZ10K Projectors    Focal Length: 10.8-12.52mm    Aperture: f/1.84-2.14    Throw Ratio: 0.48-0.55 (16:10 or 16:9)    Throw Ratio: 0.58-0.66 (4:3)

Related Questions and Answers

Q: 1. Will this attach to my Canon 100mm f/2.8 macro lens?

A: No, it will not. The Vello ET-65 III Lens Hood is not compatible for use with the Canon 100mm F/2.8L EF IS USM Macro Lens; it is only compatible with the Canon 100mm f/2 EF USM lens, the Canon 85mm f/1.8mm EF USM lens, the Canon 135mm f/2.8 EF with Softfocus lens, and the Canon 100-300mm f/4.5-5.6 EF USM lens. If you are looking for the correct Vello lens hood for use on the 100mm f/2.8L EF IS USM Macro lens, the Vello ET-73 Dedicated Lens Hood, B&H # VELHCET73, would instead be the right option for your needs.

Q: 2. I should have added that my lens has a 62mm filter diameter. I can't find anything about the diameter of this hood on the web page. Can anyone help with that information? Thanks.

A: This lens hood in specific to the following lenses: Canon EF 85mm f/1.8 USM, EF 100mm f/2 USM, EF 70-210mm f/3.5-4.5 USM, EF 135mm f/2.8 SF & EF 100-300mm f/4.5-5.6 USM This is based on their bayonet mounts on the front of the lens barrel as opposed to the filter diameter.

Q: 3. will this fit my eos rebel t5 ?

A: The ET-65III lens hood fits the Canon 80mm f1.8, 100mm f2, 135mm f2.8 Soft Focus and 100-300mm f4.5-6.5 USM lenses. If you have one of those lenses attached to your Rebel T5 body, it will fit the lens. You need to identify the LENS you are trying to attach the hood to, not the camera body, for a good answer.

Q: 4. I want to use this lens for DSLR 70D CANON , is it possible?

A: Not at all. This Is a projection lens that is not even remotely compatible with any photo or video camera.

Q: 5. Is this compatible with a Canon T5

A: I have to agree with Sean and Kevin, The Lens Hoods are made to fit a Lens not a Camera Body, This Lens Hood fits the lenses I use with my Canon Rebel T5, I hope this is helpful.

Q: 6. Will the lens hood for 100-400mkii fit on the rf100-500?

A: Yes if this works on the EF 100-400mm f/4.5-5.6L IS II USM then it should work on the RF 100-500.

Q: 7. Even though this was designed for the 85mm f/1.8, can it still be used with a 50mm f/1.4 without affecting the quality of the image?

A: In my experience a crop sensor camera (50d - 1.6x crop factor) using a 85mm lens hood on a 50mm lens will not run into the field of view. However at full-frame (1ds mark iii) one might experience some darkness at the corners of the frame.

Q: 8. can this be used with 58mm filters?

A: Yes. The polarizer isn't as easy to rotate, but it can be done.

Q: 9. Will this fit the Canon EF 70-200mm f/2.8 L IS II?

A: While the Vello ET-86 would not fit the Canon EF 70-200mm f/2.8 L IS II, the Vello ET-87W Dedicated Lens Hood (White) is a compatible alternative. https://bhpho.to/3PeIKDK

Q: 10. is this hood fits on Canon 77D ?

A: The dedicated Vello ET-65B Lens Hood is specifically designed for use with Canon's 70-300mm f/4.5-5.6 DO-IS and f/4-5.6 IS USM lenses.