Shorter and lighter than the NTG3 and with a flatter bass response, the Rode NTG5 moisture-resistant shotgun microphone lets you capture natural, uncolored sound indoors or outside for your next indie film, TV shoot, or documentary project without weighing down your rig.

Professional-level features such as ultralow-noise circuitry, a smooth off-axis response, and a tightly controlled low end make it ideal for a range of location recording scenarios. Plus, it includes a furry windshield and a pistol grip shockmount that can be attached to a boompole for increased versatility.

The NTG5's extremely high sensitivity allows it to produce robust output levels without having to apply extreme gain at your mic preamp. Sonically, the NTG5 delivers acoustic transparency due to its pioneering circular acoustic ports, gentle rise in high frequencies, and rumble-reducing attenuation of low bass frequencies. Its switch- and dial-free design lets you set up quickly and focus on the sound instead of fiddling with various mic settings. RF-bias technology and conformal coating ensure reliable performance even in severe conditions.

For Indie Films, TV & Documentaries    Lightweight NTG5 Short Shotgun Mic    K-Tek Boompole with Internal Cable    Shockmount and Furry Windshield    Phantom Powered    Moisture-Resistant for Humid Conditions    Compact, Lightweight Housing

When your work takes you outdoors, you're bound to encounter humidity and condensation, which can cause many mics to fail. The NTG5's RF-bias technology and conformal coating provide excellent resistance to moisture, cold, and dust, allowing you to reliably capture high-quality audio in normal and adverse environmental conditions.

The NTG5 was engineered for transparency and all-weather performance. The combination of the NTG5's 8" long body, revolutionary circular acoustic ports, and supercardioid polar pattern yields focused on-axis directionality, smooth off-axis response, and a transparent tone with a tightly controlled low end. Its ultralow self-noise of 10 dBA and highly sensitive condenser element communicate detailed audio unburdened by the hiss that plagues many low-cost microphones.

Thanks to its 3-pin XLR output and compliance with 48 VDC phantom power, the NTG5 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters as well as built-in preamps on many camcorders and cinema cameras. The included short XLR cable—designed for use with the supplied pistol grip—features Neutrik and Switchcraft connectors and an integrated strain-relief junction box.

The NTG5 includes the PG2-R pistol grip shockmount, which impedes the transfer of vibrations to the microphone, and accommodates comfortable handheld operation or placement on a boompole. A mic clip is supplied in case you need to affix the NTG5 to a standard mic stand in a studio.

The NTG5 has a foam windscreen to reduce unwanted light wind noise from fans, heaters, and air conditioners. For maximum reduction of wind noise in indoor or outdoor environments, swap the windscreen for the included furry windshield.

Related Questions and Answers

Q: 1. will this work with Lumix FZ300?

A: This should be no problem. Newer versions of the Lumix have the proper 3.5mm input jack so using the boom pole should work fine. Also, the standard shoe mount will accept direct mounting on the camera.

Q: 2. What is the S/N Ratio and the Dynamic Range?

A: The RODE NTG5 Shotgun Microphone Kit with Auray Boompole (BH # RONTG5ABPK) has an S/N ratio of 84 dB. The dynamic range specification is not published, but estimated to be about 120dB SPL.

Q: 3. What does the switch on the back do?

A: One is a -10 dB -20 dB Pad. The other is a High-Pass Filter 80 Hz.

Q: 4. Would this fit the audio technica at4053b?

A: The Rycote Super-Blimp NTG5 Windshield Kit for Rode NTG5 Microphone's mounting suspension could probably be stretched to accommodate the diameter of the Audio-Technica AT4053b Hypercardioid Condenser Microphone, but this would not be an ideal pairing. A more optimal pairing for the AT4053b would be the Rycote Super-Shield Kit for Shotgun Mics (Small) (BH #RYSSKS): https://bhpho.to/3lNAIp5

Q: 5. Can I extend the cable if my camera is far from this mic (mounted on a stand) ?

A: Yes, a standard 3.5mm audio extension cable would allow you to extend the cable on the Rode VideoMic Camera-Mount Shotgun Microphone. BH #ROVC1 Rode VC1 3.5mm TRS Microphone Extension Cable for Cameras (10') is an example of this type of cable: https://bhpho.to/33Or2Vv

Q: 6. Would this fit the Rode NTG4+?

A: No, the Rycote Super-Blimp NTG5 Windshield Kit is the wrong size. You will want to use the Rycote Super-Blimp Kit for Rode NTG & Shotgun Mics - 11" Length, 0.7-0.9" Diameter (B&H # RYWKNTG) which is intended for use with Rode NTG1, NTG2, NTG3, NTG4, and NTG4+ model microphones.

Q: 7. Does this work with the mke 600 sennheiser? And does it come with a dead cat or is it a simple sleeve over the blimp itself?

A: That will fit the MKE 600. It is a complete blimp system with a suspension, the blimp, a handle, a short XLR cable that connects to the inside, and a boom pole adapter.

Q: 8. Will this mic works to be plugged straight to the 3,5 jack port of the Atomos ninja flame monitor to record audio ? Do you have any recommendations ? Thanks for your answer !

A: The Rode VideoMic Pro is compatible with the Atomos Ninja Flame. The Ninja Flame features a 3.5mm input jack that accepts mic and line level signals. The Rode mic is self powered via battery and is a great choice for a quality and compact mic for your video recorder/camera.

Q: 9. Is the included RF cable shielded? Some of the other Rycote Super-Shield systems list that the XLR cable is, but this one doesn't say.

A: Although Rycote does not divulge this level of specification for the cables used in the Rycote Super-Blimp NTG5 Windshield Kit for Rode NTG5 Microphone, most of their cable sourcing comes from Mogami and should most likely be well shielded.

Q: 10. Can this mic be used with the Canon 70D?

A: Yes you sure can. Works great!