The black I2 Instrument Microphone, High Gain, with 3.5mm Locking Connector for Azden 15BT and 35BT Wireless Transmitters from Countryman is a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.

The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and capturing detail in quieter instruments. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a 3.5mm locking connector for direct connection to Azden 15BT and 35BT wireless bodypack transmitters.

Figure-8 Polar Pattern    For Instruments and Sound Reinforcement    Natural On-/Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.

A microphone with a figure-8 (bidirectional) pickup pattern is sensitive to sound coming from the front and coming from the rear, but has a very high rejection for sound coming from the sides. Great for mid/side and Blumlein stereo applications.

Related Questions and Answers

Q: 1. Could this be used for tethering photo from sonya7r4?

A: The PORTKEYS LH7P supports wireless camera control ( Control Record, Shutter, Focus & More) available via the integrated wireless module for Blackmagic Design cameras such as the Pocket Cinema Camera 4K/6K/6K Pro, and Sony cameras, including the a1, a9, a7C, FX3, FX10, a7S III, a7 IV, RX0, and a7 III. The display connects with your camera via HDMI cables. True tethering would require a computer plus software like Lightroom, and Capture One Pro. Capture One Pro 11 (Key-Card) BH #CAC1PRO11KC

Q: 2. How long will it last on a full battery charge?

A: A Sony NPF-L970 battery would last about 1hr at maximum brightness when working with the PORTKEYS LH7P 7" High-Bright Touchscreen Monitor. SmallRig NP-F970 Dual-Battery and Charger Kit BH #SM3823 • MFR #3823

Q: 3. Is this compatible with a Canon M50 Mark II? Will the battery from a Portkeys PT6 Monitor work with this monitor?

A: Yes, the Canon M50 Mk II would work with the PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) for video but not control. The Portkeys PT6 also works with the same SONY NPF-L batteries like the PLH7P. Your batteries will work with the new display. ZILR Hyper-Thin High-Speed Micro-HDMI to HDMI Cable with Ethernet (17.7") BH #ZI4KP60M17 • MFR #ZRHAD01 Genaray 2 x NP-F770 4400mAh Batteries & 2 x Compact Chargers Kit BH #GENPF770CS • MFR #BCK-2NPF2CH4400

Q: 4. Would this work with the Synco WAir-G2-A2 units?

A: Because the SmallRig Telescoping Interview Handgrip for Rode Wireless GO is specifically designed to match the form factor of Rode's Wireless GO transmitter, it is hard to confirm whether it will also work with similar wireless components from other brands like Synco. The Handgrip does appear to attach to the transmitter via the belt clip, however, and after inspecting the form factor of the units in the Synco WAir-G2-A2 Ultracompact 2-Person Digital Wireless Microphone System for Mirrorless/DSLR Cameras (BH #SYWAIRG2A2), the belt clip appears quite similar to that of the Rode. There is a good chance that this handgrip can be used with the WAir-G2-A2, but we cannot confirm for certain at this time.

Q: 5. Can it enter/exit playback on Blackmagic Pocket Cinema Camera 6K, to review clips on camera, when camera on crane beyond reach?

A: Unfortunately, you cannot access playback on the Blackmagic Pocket Cinema Camera's touch screen and then the Portkeys LH7P Monitor.

Q: 6. Will it be too big for a rigged out zv-e10?

A: The PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) would be quite a bit larger in comparison to the Sony ZV-E10, considering the 4.5" width of the camera versus the 6.9" width of the monitor.

Q: 7. Does it have focus peaking?

A: The PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) includes focus peaking along with many other tools to assist in shooting.

Q: 8. Is the USB Type A power input Male or female?

A: The USB ports on the PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control are all female.

Q: 9. Dose this work with the Blackmagic pyxis camera?

A: The PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) would not be compatible with the Blackmagic Design PYXIS 6K Cinema Box Camera as it does not have HDMI output.

Q: 10. Will this work with Hollyland Lark?

A: No, the SmallRig Telescoping Interview Handgrip for Rode Wireless GO is designed specifically for use with the Wireless GO transmitter which is slightly larger than the Hollyland Lark transmitter. The Rode Wireless GO transmitter is 1.7 x 1.8 x 0.7" ( 44 x 46.4 x 18.5 mm) and the Hollyland Lark transmitter is 1.5 x 1.5 x 0.7" (37 x 37 x 17 mm).