The 3-12x50 KonusPro EVO Riflescope from Konus is a versatile optic for serious hunters and shooters. You'll get a bright sight picture thanks to the large objective lens, and the etched-on-glass, blue/red-illuminated 30-30 reticle offers ranging capability. Light transmission is enhanced by fully multicoated lenses. Finger-operated tactical turrets correct impact point at a precise 1/4 MOA per click, with 91 MOA of elevation and wind adjustment inside the 1", one-piece aluminum maintube. Water and fogproof, the EVO comes equipped with a side parallax correction knob and a sunshade.

Second Focal Plane Reticle    1" Maintube    1/4 MOA Impact Point Correction    91 MOA Elevation/Windage Adjustment    Low-Profile Tactical Turrets    Fully Multicoated Optics    Water & Fogproof    Flip-Up Covers

• 3-12x magnification

• 50mm objective lens for bright image

• Fully multicoated optics

• 2.9" maximum eye relief

• 5-2.6mm exit pupil

  • Etched on glass

  • Second focal plane, maintains same size at all magnifications

  • Four thick posts with fine crosshair

  • Ranging capability

  • Red or blue illumination to suit conditions

    • 1/4 MOA impact point correction

    • 91 MOA windage and elevation ranges

    • Side parallax correction knob

    • Low-profile tactical turrets

      • 1" maintube

      • Sunshade

      • Water, fog, and shockproof

      • Measures 13.1", weighs 33.1 ounces

        Related Questions and Answers

        Q: 1. What lens plate do I need to order for a Tamron 150-600 G2?

        A: You do not need to order any plate. The Tamron SP 150-600mm f/5-6.3 Di USD G2 comes with a tripod collar with a built-in Arca-Swiss foot that will slip right into the shoe on the head. If you have other tripod plates, and so that we may best assist you, please email us at prophoto@bhphoto.com.

        Q: 2. Will this fit the older OCF I gel holder ?

        A: Yes, the Profoto OCF II Grid (20°) [BH #PR101122} should fit the older OCF I gel holder.

        Q: 3. I hope my question is not too, I guess, stupid, but I'll ask regardless and hope for the best. Can I use it, and would it work well with my Fuji GFX 100 and GFX 100S not using large zoom-type lenses? I have the GF 100mm, GF 32-64mm, and several others, but I wonder if this unit would be worth the purchase if I use these lenses? Thank you for your thoughts. Oh, and I'll be using it on a "Really Right Stuff" tripod. Again, thank you!

        A: This Gimbal is definitely usable for your setup, though maybe not ideal. Gimbals are generally best suited for tracking wildlife and the like. For general use I would suggest looking at a Ball Head or a Pan and Tilt Head.

        Q: 4. Can this mount a large body like an R3 with a short/light lens (without a tripod collar)? Will the body clear the vertical arm?

        A: A gimbal such as the Oben GH-30 is not meant for mounting the camera body. Instead the foot from a long lens is mounted and the body sits behind the gimbal. So the Canon R3 camera will not fit on the GH-30 but the Canon R3 plus the Canon 70-200 f2.8 RF lens will fit.

        Q: 5. Can you mount this on a Sirui SR-3004 tripod?

        A: Yes, but you would have to remove the top plate on the SR-3004 so that the video head can be mounted into its 75mm bowl.

        Q: 6. How many inches long is the quick release plate? Is a longer one available?

        A: The included quick release plat is approximately 2 long. Here is a longer one. 3.6 x 1.5 x 0.5 (92 x 38 x 13 mm) Really Right Stuff L84 Multi-Use Fore-Aft Plate with 1/4 -20 Screw B&H # REL84PLATE.

        Q: 7. How can I shoot in portrait mode with a tele lens that does not have the tripod collar?

        A: You would need this Wimberley M8 perpendicular plate to change the orientation of the plate from lens orientation to camera orientation. https://www.bhphotovideo.com/c/product/303253-REG/Wimberley_M_8_Module_8_M_8_Perpendicular.html?sts=pi Then you would need to use an L bracket on the camera like this to be able to place the side of the camera on gimbal. https://www.bhphotovideo.com/c/product/1714730-REG/3_legged_thing_qr11_lb2_0_qr11_2_0_universal_l_bracket.html

        Q: 8. will this work with canon 1dx mkii and canon 400 f2.8 III?

        A: Yes this head is suitable for the Canon 1DX Mark II and the Canon 400mm f/2.8L III lens.

        Q: 9. Does SIRUI BCH 20 has some starting lag or something and how much

        A: According to Sirui, the Sirui BCH-20 Video Head features the following: "Friction adjustment can be applied in 3 steps, with the 0 setting providing nearly-frictionless movement".

        Q: 10. Does the release plate for the Sirui BCH-20 slide in the from the rear, or can it be side mounted? Side mount release plates are super convenient when you have rails and gear attached to the camera.

        A: Hi,It can only be mounted from the rear. You cannot open the clamp enough to mount or remove the plate from the side.