Countryman I2 Bass And Cello Microphone Kit With Ch-style 4-pin Connector For Audio Technica Wireless Transmitters (black)
- Product Code: ga194130
-
The black I2 Bass and Cello Microphone Kit with cH-Style 4-Pin Connector for Audio Technica ATW-3201 Wireless Transmitters from Countryman is a mic that has been built from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. It can be used to capture natural audio for this instrument.
The I2 microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and captures detail for quieter instruments. Flexible close miking techniques are aided by the bass and cello mount, which sits securely behind the bridge with a positioning arm for placement. In addition, the 5' cable is hardwired to the mic and terminates with a cH-style 4-pin connector for direct connection to Audio Technica ATW-3201 wireless bodypack transmitters.
Figure-8 Polar Pattern For Instruments and Sound Reinforcement Hardwired Connector Natural On & Off-Axis Frequency Response For Uncolored Recordings Reduced Feedback Issues
Key Specs | |
---|---|
Compatible Transmitters | Audio Technica: ATW-3201 |
Polar Pattern | Figure-8 |
Frequency Response | 50 Hz to 20 kHz |
Maximum SPL | 130 dB (1% THD) |
Sensitivity | H for High Gain/Distance Miking (I2) |
Analog Output | 1x Hirose cH-Style 4-Pin Male |
Environmental Resistance | No |
Microphone | |
Compatible Transmitters | Audio Technica: ATW-3201 |
Polar Pattern | Figure-8 |
Included Tone/Pattern Caps | No |
Performance | |
Frequency Response | 50 Hz to 20 kHz |
Maximum SPL | 130 dB (1% THD) |
Sensitivity | -40 dBV/Pa (1 kHz) |
Sensitivity | H for High Gain/Distance Miking (I2) |
Equivalent Noise Level | 20 dB (A-Weighted) |
Connectivity | |
Analog Output | 1x Hirose cH-Style 4-Pin Male |
Cable Length | 5' / 1.52 m |
Power | |
Power Sources | Phantom Power |
Operating Voltage | 6 to 50 V (Phantom Power) |
Physical | |
Color | Black |
Environmental Resistance | No |
Dimensions | H: 0.16 x W: 0.28 x L: 0.44" / H: 3.5 x W: 7 x L: 10.5 mm (excluding Cable Strain Relief) |
The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.
Flexible close miking techniques are aided by the instrument mounts, which position securely and gently on the instrument for capturing audio.
Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning and consistent patterns.
A microphone with a figure-8 (bidirectional) pickup pattern is sensitive to sound coming from the front and coming from the rear, but has a very high rejection for sound coming from the sides. Great for mid/side and Blumlein stereo applications.
Related Questions and Answers
Q: 1. Can I attach the Android version to a phone even if there is a case on?
A: It really depends on the case you have and how much access you have to the phone's USB-C port. The UC receiver does need to be plugged in all the way in order to function properly. It was designed to be flush mounted to the phone so it's easy to use when you're moving around. If you do need to keep the phone inside a case that prevent full access to the USB-C port, you can try a USB-C extender like the IOGEAR USB Type-C Male to Female Adapter - 1' (B&H #IOG2LU3CMF). Keep in mind that this is not how the receiver was intended to attach, so consider using hook-and-look fastener (velcro) to secure the UC receiver onto the back of your phone's case. But the best way to assure that the wireless mic system works properly and to avoid damage is to attach the receiver directly to the phone without an adapter, just as it was designed to be used.
Q: 2. What sort of windscreen comes with it? Necessary to buy an additional one to minimize breaths and pops?
A: It's a standard slip on cap windscreen -- I have found it to be more than sufficient for wind, particularly mounted inside -- I don;t get a lot of breath noise at that distance/angle -- main issue is clothing rustle.
Q: 3. Can I connect to any recording devices like a Zoom? Or can it only connect to a smartphone or camera?
A: Yes, you can use the Comica Audio BoomX-D D1 with a Zoom recorder. The wireless system can be connected to a standard mic input on a camera, recorder, mixer, amplifier, computer, and just about any device with a mic input. It is not limited to cameras and smartphones only. You can also use adapters if you need to connect the receiver to an XLR input on a recorder, mixer, amplifier or pro camcorder, and there are also adapters to connect to the Lightning port on an iPhone or to USB-C on an Android phone. Please feel free to contact us by phone or through live chat on the website if you have additional questions or need further assistance.
Q: 4. Does the receiver have an SD card slot or a way to store the files without going through a camera or phone?
A: The receiver does not record audio files by itself. To record audio without a camera or phone, you plug this system into an external audio recorder, and record to an SD card, such as this B&H # ZOH1N.
Q: 5. I hear tons of environmental noise in my recordings. I can hear people's conversations that is more than 10feet away. The lav was underneath my shirt close to my throat. Anyway to lessen the environmental noise? Thank you!
A: I have never found this problem, period. I think perhaps you may still have the camera mic podded up in your edit? I have found that when I sync up the audio from the DL-10 with the video and eliminate the camera audio that I have crystal clear audio with virtually zero extraneous audio. Hope this helps.
Q: 6. Will this work on a Leica M10 to trigger a YN560 set in manual mode?
A: Technically this should work with the Leica M10 and a manual flash. The radio sync has a standard hot-shoe so it will fit the flash and the camera’s shoe. Note, it has not been tested specific with that camera and flash combined.
Q: 7. Do the mics or receiver have a limiter?
A: No, this system does not come with on-board limiters. You do have the ability to adjust the output volume from the receiver, but limiting functions would be done in your recorder, mixer, or camera,
Q: 8. Is the Comica Audio Boomx-D wireless microphone compatible with the CANON VIXIA HF R800 Camcorder?
A: Yes, this system is compatible with your camcorder. Just a couple things to look out for: the wireless system comes with two output cables, one is TRS to TRS and the other is TRS to TRRS. You want to use the TRS to TRS when connecting to the camcorder. Both ends look the same and have two black band (TRRS has three black bands). Also, your camcorder does not have a shoe mount for the receiver, so to make things easy we recommend using a shoe mount bracket, like this one from Vello: https://www.bhphotovideo.com/c/product/1472520-REG/vello_cb_550_dual_shoe_bracket.html
Q: 9. Hello! Will this work on a Canon R?
A: Yes, it is compatible with the EOS R.
Q: 10. Is it true that other brand mics won't work on these comica wireless kits? can anyone confirm if they've been able to use better mics than the ones included?
A: Other branded microphones besides COMICA will work with this system. RODE and Countryman to name a few are compatible. Navigate to the "ACCESSORIES" tab and then click on "Lavalier Microphones". https://bhpho.to/3xRCBpq
Top Bestselling Products
Products You May Like
Wooden Camera Gold Mount Plate With Right-angle Xlr Connector
$750.00 $907.50
Ergotron Workfit-d, Birch Wood Grain
$3,507.00 $4,278.54
Lg 27bk67u-b 27" 16:9 4k Uhd Freesync Ips Monitor
$777.00 $1,142.19
Izotope Neutron 4 Modern Intelligent Mixing Plug-in Suite (download)
$747.00 $1,150.38
Film Devices 4-pin To 4-pin Hirose Straight Cable (21.7")
$105.00 $147.00
Chimera Astera Titan Tubepro Pro Kit
$971.70 $1,476.98
Magenta Hdmi 2.0 Active Plenum Optical Cable (82')
$1,039.50 $1,320.16
Cisco Ms125-48lp Access Switch With 3-year Enterprise License And Support
$7,776.69 $11,976.10
Sony Alc-sh145 Lens Hood
$159.00 $254.40
Nikon Z Teleconverter Tc-2x
$1,790.85 $2,417.65
Global Truss 2x2s Base Plate For F33 Truss
$672.00 $981.12