Securely mount your 30mm diameter riflescope with these Steel Riflescope Rings for .22/Airgun from Konus. These 24.8mm high rings mount on .22 or airgun dovetails and are recommended for scopes with objective diameters of 44mm. Four Torx screws per ring and square recoil lugs assure your optic will stay in position.

Fits 30mm Scope    Four Torx Screws per Ring    Square Recoil Lug    Mounts on .22/Airgun Dovetail

Related Questions and Answers

Q: 1. Do these fit the Sennheiser MKH 416?

A: Yes, these will work with the 416. Please let us know if you have any futher questions.Best,Peter Hannigan323-845-1171Sanken/plus24

Q: 2. I understand that the filter thread is 105. The specs say via adapter. Is the adapter included? also what filter is recommended?

A: The FUJIFILM GF 30mm f/5.6 T/S Lens (FUJIFILM G) includes the adapter. The filter you use depends on the subject. If you need to cut reflections, get the Sigma 105mm WR (Water Repellent) Circular Polarizer Filter, BH #SICPWR105.

Q: 3. Hi I have the Z6 Nikon camera, in general dose this lens do well with handheld photography?

A: This lens would work very well when shooting hand held with the Z6.

Q: 4. I know this is a little slow for astro, but has anyone used this for night photography? Does this lens have any Coma issues wide open?

A: This lens is a great candidate for astro photography as it does have low coma. Aperture 4 is a good balance between quality in low light and also having greater depth of field.

Q: 5. does it come with lens hood?

A: yes - comes with metal lens hood and leather lens pouch

Q: 6. Does this work on the Sanken CS-3e on a Sony FX3?

A: Yes, the Sanken ROCS Rubber O-Rings cam be used with the Sanken CS-3e Short Shotgun Microphone and Sony FX3 Cinema Camera.

Q: 7. Will the o rings fit with the Rode NTG3 on AG-UX90 that the holder is set up for 21mm?

A: I use the o rings on an NTG3 on my canon c300 and it works well.

Q: 8. When I use this lens at 14mm will I get the full benefit of the 5 axis vibration reduction from The Z6 Nikon Camera. Thanks

A: Yes, VR, works at all focal lengths.

Q: 9. Would I need this for a Rode NTG-3 to put on a Canon XA-35?

A: Spacers such as the Sanken O-Rings will be required for the NTG-3 and most similar shotgun mics when mounting to a cameras built in mount such as the Canon XA35. These mounts are designed oversized to accommodate a wide variety of mics and mic types.

Q: 10. Is there an adapter available to use this lens on a Hasselblad digital camera?

A: No, unfortunately there aren't any adapters in this point of time (February 2024) that will allow Hasselblad cameras to use Fuji GF lenses.