The Thronmax Mdrill Zone is an analog, small-diaphragm condenser microphone with a 3-pin XLR connection. It employes Thronmax's VERTIGAIN technology to help increase fidelity by forcing soundwaves to move in a vertical direction. This is a cardioid microphone, focusing audio capture on what's in front of the mic. Its 25mm capsule allows you to capture a frequency response of 25 Hz to 20 kHz. With its warm tone and clear top in, the mic is suitable for vocals, acoustic guitars, and voiceover work. Use the high-pass filter to filter off low-end rumble below 150 Hz if need be. It requires 48V phantom power to operate. The Mdrill Zone includes a shockmount.

Analog Cardioid Mic for Vocals & Guitar    25mm Small-Diaphragm Condenser    25 Hz to 20 kHz Frequency Response    XLR Connection    Requires 48V Phantom Power    Includes Shockmount

Related Questions and Answers

Q: 1. Is this the Rode NT1 signature series?

A: The RODE Complete Studio Kit with AI-1 Audio Interface, NT1 Microphone, SM6 Shockmount, and XLR Cable includes the Rode NT1, not the NT1 Signature Edition.

Q: 2. I love this boom arm, but does anyone know if it's possible to get a longer bolt where the mic mounts so I can use a mic flag with it?

A: Here's a 5/8'' female to male extension tube from Shure BH #SHA26X. The Rode PSA1 should have included the required 3/8'' female to 5/8'' male adapter you would need to make this work.

Q: 3. Does this Synco mic M1s work with a Samsung Galaxy S23 Ultra?

A: The Synco Mic-M1S Ultracompact Camera-Mount Shotgun Microphone can be used with an Android smart phone as long as you have a 3.5mm to USB-C audio adapter such as BH #SASRC2003.

Q: 4. can you use this with your cell phone?

A: No unless you have a audio interface/mixer connected to the phone that has a battery to provide the microphone with Phantom power (48v) otherwise this microphone will not work straight into a phone. The link bellow has a Saramonic audio mixer that will allow you to connect this microphone into your phone. https://www.bhphotovideo.com/c/product/1301929-REG/saramonic_smartrigp_2_channel_mic_instrument_interface.html

Q: 5. Are there any benefits to using 48V phantom power? It says it can operate on both, but are there reasons I would choose one over the other?

A: The 24V powering option for the Rode NT1-KIT Large-Diaphragm Cardioid Condenser Microphone would really only be useful if you for some reason had a 24V supply, or a supply that did not offer 48V. There should not be a difference or benefit in microphone performance using one or the other.

Q: 6. How does this attach to the desk or table?

A: The Rode PSA1 Studio Boom Arm Kit with XLR Cable and Shockmount for Rode Podcaster or Pro is intended to attach to a desk, with the included "Desk-Clamp Attachment".

Q: 7. Can the mic bracket be removed?

A: The included bracket cannot be removed, but the foot on the stand can be removed to allow this product to mount to a standard boom arm. Thank you for shopping at B&H!

Q: 8. will it work with a beacn cardiod usb-c mic?

A: The RODE PSA1 Studio Boom Arm will work with any microphone or microphone mount that uses a standard 5/8 thread. In other words, it will work with anything that works with a regular microphone stand.

Q: 9. Can i use usb speakers with it Or do i have to buy speakers with the left right cord?

A: Hello Freddie, the AI-1 Audio Interface is meant to work as a replacement for your onboard sound card and is equipped with two balanced 1/4" outputs and not USB. If you would like to use your USB speakers, you would most likely have to use the AI-1 as your input first, disconnect, and then use your USB speakers as an output after the fact. I have heard of solutions for using two USB ports simultaneously, however, you would need to consult with your computer's manufacturer to see if this is possible.

Q: 10. Does this work with the NTG2 Rode mic?

A: This will work with either the included mount that comes with the NTG2 or any shockmount for the NTG2 with a 3/8'' threading, such as B&H # AUDUSM1.