The TL-SG2210P 8-Port Gigabit PoE Smart Switch with 2 SFP Slots from TP-Link is designed for small and medium business networks that require high connectivity, functionality, and performance. This switch can be configured to meet multiple needs and provides you with 8 Gigabit Ethernet ports that support network traffic at speeds up to 1000 Mbps. Also supported is 802.3af-compliant Power over Ethernet (PoE) up to 53W. PoE passes electrical power along with data on Ethernet cabling, allowing a single cable to provide a data connection and electrical power to devices such as wireless access points or IP cameras.

This 8-port switch includes 2 combo SFP (small form-factor pluggable) slots. This expands the flexibility of your network, as these slots support SONET, Gigabit Ethernet, Fibre Channel, and other communications standards. It also features an 8K MAC Address Table, which allows you to store a large number of MAC addresses.

Also provided are security features, such as Storm Control, which protects against Broadcast, Multicast, and Unknown-unicast Storm. Network traffic is managed with Quality of Service to help ensure a smooth and even network flow. Setup is simplified with user-friendly web management interfaces, including CLI, SNMP, and RMON. This TP-Link switch operates at 100-240 VAC at 50/60 Hz and includes a power adapter, resource CD, and rubber feet.

IEEE 802.1 / 802.2 / 802.3 Standards    8 x 10/100 Mbps RJ45 Ports    2 x 1000 Mbps SFP Slots    Fanless Design    20 Gb/s Bandwidth    14.9 Mpps Forwarding Rate    8k MAC Address Table    Enhanced QoS Functionality

• Standard: 802.3af compliant

• PoE Ports: 8 ports

• Power Supply: 53W

• Static Link Aggregation / Link Aggregation Control Protocol (LACP)

• Up to 512 VLANs simultaneously(out of 4K VLAN IDs)

• STP/RSTP/MSTP

• IGMP Snooping

• LLDP (LLDP-MED)

• 4 Priority queues

• Support IEEE 802.1P

• DSCP QoS

• Rate limit feature

• Access Control List (L2~L4 ACL)

• Port security

• Storm control

• SSL and SSH encryptions

• Web-based GUI

• Command Line Interface (Telnet)

• SNMP v1/v2c/v3

• RMON (1, 2, 3, 9 group)

Related Questions and Answers

Q: 1. Is the TP-Link TL-SG1024DE 24-Port Gigabit Easy Smart Switch a POE switch?

A: Unfortunately no. It would be a challenge to find a 24 port POE switch at this price point. If your need is only a few ports, you could supplement this with a small switch that provides a few POE ports (i.e. 8 port switch with 4 POE ports), or utilize POE injectors.

Q: 2. TP-Link rep, what switch is your most inexpensive managed switch?

A: That would be the TL-SF1005D. If you are looking for a sub $20 Gigabit switch look at the LS1005G

Q: 3. Which hardware version is this? v1 or v2?

A: As of 1/29/21 stock, we have V1.

Q: 4. Does it work with OC200 Omada controller?

A: The TP-Link TL-SG2008P JetStream 8-Port PoE+ Compliant Gigabit Managed Switch (BH #TPTLSG2008P) will work with the OC200 Omada controller.

Q: 5. The power budget says 384W with each port able to provide 30W. Does this mean the power budget only supports 12.8 devices or does it support all 48 ports at 8W each? My devices pull a max of 6.5W each.

A: The TP-Link TL-SG3428XMP JetStream 24-Port PoE+ Compliant Gigabit Managed Switch with SFP+ budget of 384w is total draw. Any one port can handle up to 30w. You can use all the ports at a lower amount as long as you do not exceed the total of 384w.

Q: 6. I would like to know what is the power adapter input power data: voltage and frequency?

A: As per the manufacture the TP-Link TL-SG1005P 5-Port Gigabit PoE Unmanaged Switch uses a 56W Power Supply.

Q: 7. What version of the hardware are you selling? TP-Link's website notes several versions, V3.0 and V3.20.

A: We currently do not have an exact version number. We have a mix of V3, V4 and V5 of the TP-Link TL-SG2210P 8-Port Gigabit PoE Smart Switch with 2 SFP Slots depending on the chipset.

Q: 8. Can I run normal CAT5/6 cable from one of the SFP ports to another router/switch's RJ45 port?

A: An Ethernet cable cannot be inserted directly into an SFP fiber port. You would require an adapter such as BH #TPTLSM5310T to facilitate that connection.

Q: 9. What is the hardware revision of this switch?

A: I'm very sorry but the revision is not something the manufacturer tells us before they ship them to us. If they had different part numbers, it would be easy to tell but since they don't, we cannot guarantee which revision is inside the box. Sorry for the inconvenience.

Q: 10. So if I upgrade to a mesh wifi router which has only one ethernet in-port than my old non-mesh wifi router, is this the right device to, in effect, add more ethernet-in ports to the mesh router? Is there a performance hit using this?

A: Yes, the TP-Link TL-SG1005P 5-Port Gigabit PoE+ Unmanaged Switch is exactly what one would use in the case you described, at no detriment to performance.