The black I2 Instrument Microphone, Standard Gain, with Microdot Connector for Sennheiser SK 2012 Wireless Transmitters from Countryman is a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.

The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version offers a standard gain and is suitable for close miking and loud instruments like horns. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a Microdot connector for direct connection to Sennheiser SK 2012 wireless bodypack transmitters.

Figure-8 Polar Pattern    For Instruments and Sound Reinforcement    Natural On-/Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.

A microphone with a figure-8 (bidirectional) pickup pattern is sensitive to sound coming from the front and coming from the rear, but has a very high rejection for sound coming from the sides. Great for mid/side and Blumlein stereo applications.

Related Questions and Answers

Q: 1. Can an mkh 30 fit inside of this windshield?

A: Sennheiser MKH 30 Dimensions: ø: 0.98 x L: 5.91" / ø: 25 x L: 150 mm The interior dimensions of the Rycote WS 9 Modular Windshield Kit for Sennheiser MKH8020, 8040 and 8050 Mics BH #RYWS9MXBGMZL, will not accomodate a Sennheiser MKH 30 microphone.

Q: 2. My question was whether it was equivalent to the Sennheiser windscreen in high frequency reduction as I will be using it in my studio for a voiceover mic and don’t want to lose any of the high frequencies?

A: This windscreen would be about equal to any high frequency reductions caused by the Sennheiser windscreen.

Q: 3. will this fit the audio technical at8035?

A: The correct Modular Kit for the Audio-Technica AT8035 is the WS 6 (Part# 086006): a href= http://www.bhphotovideo.com/c/product/325577-REG/Rycote_086006_Windshield_Kit_6.html target= _blank http://www.bhphotovideo.com/c/product/325577-REG/Rycote_086006_Windshield_Kit_6.html/a

Q: 4. will this fit a scheops cmit 5u mic ?

A: The compatible Rycote kit is the: Rycote Windshield Kit 4 - Complete Windshield and Suspension System B&H # RYWSK4

Q: 5. Is the blue cable included? This set contains set BH#SEWXSPLSTR?

A: Yes, the Sennheiser XSW-D Portable Lav Mobile Kit with Transmitter, Receiver, Lapel Mic, Mounts & Manfrotto PIXI Tabletop Stand does include the blue cable. There are two cables included with this kit. One is a locking 3.5mm TRS to 3.5mm TRS coiled cable, and the other is a locking 3.5mm TRS to 3,5mm TRRS coiled cable.

Q: 6. Can assembly be tripod mounted?

A: Yes, this can be tripod mounted.

Q: 7. will this hold a sony ecm-673?

A: While the Rycote Standard Hole SGM 18cm Foam Windscreen will work with the diameter of the Sony ECM-673 Short Shotgun Microphone, the windscreen's length will leave less than an inch at the end of the ECM-673 for attaching a shock mount or mic clip. A shorter, more ideal option for the Sony ECM-673 would be the Rycote 104408 10cm Standard Hole SGM Foam (BH #RYSGM10IJ01): https://bhpho.to/3x63G9d

Q: 8. Does this fit the EM 100 G4 receiver unit?

A: Hi Gene - the GA 4 rackmount kit is designed to be used with evolution Wireless D1 - for your EM 100 G4 system, the correct model number is: GA 3 (Sennheiser P/N: 503167)

Q: 9. does it fit with mkh8070 mkh70 Rycote Windshield Kit 6 - Complete Windshield and Suspension System?

A: Hi there: thanks for your question. The 8070 will require the 8J version of our Modular series. See here: a href= http://mymic.rycote.com/products/windshield-solutions/modular-windshield-kit/modular-windshield-ws-8j-kit/. target= _blank http://mymic.rycote.com/products/windshield-solutions/modular-windshield-kit/modular-windshield-ws-8j-kit/./a The MKH 70 will fit in a Modular 6. MF.

Q: 10. Can be attached an extension to fit longer mics? Thanks

A: There is no extension for this device.