Countryman I2 Instrument Mic, Standard Gain, With Lemo 4-pin Connector For Telex Wt-200, Wt-400, And Wt-450 Wireless Transmitters (black)
- Product Code: ga194264
-
The black I2 Instrument Microphone, Standard Gain, with LEMO 4-Pin Connector for Telex WT-200, WT-400, and WT-450 Wireless Transmitters from Countryman is a mic that has been engineered from the ground up for natural on- and off-axis frequency response, low-noise, and precise polar patterns with deep nulls. This tiny instrument microphone can be used to capture audio in sound reinforcement applications for saxophone, violin, viola, cello, double bass, acoustic guitars, piano, brass, and percussion instruments.
The I2 instrument microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version offers a standard gain and is suitable for close miking and loud instruments like horns. It is supplied with a foam windscreen, a basic clip, and a carrying case. In addition, the 5' cable is permanently attached to the mic and terminates to a LEMO 4-pin connector for direct connection to Telex WT-200, WT-400, and WT-450 wireless bodypack transmitters.
Figure-8 Polar Pattern For Instruments and Sound Reinforcement Natural On-/Off-Axis Frequency Response For Uncolored Recordings Reduced Feedback Issues
Key Specs | |
---|---|
Compatible Transmitters | Telex: WT-200, WT-400, WT-450 |
Polar Pattern | Figure-8 |
Frequency Response | 50 Hz to 20 kHz |
Maximum SPL | 150 dB (A-Weighted) |
Sensitivity | S for Standard Gain/Close Miking (I2) |
Analog Output | 1x LEMO 4-Pin |
Environmental Resistance | No |
Microphone | |
Compatible Transmitters | Telex: WT-200, WT-400, WT-450 |
Polar Pattern | Figure-8 |
Included Tone/Pattern Caps | No |
Performance | |
Frequency Response | 50 Hz to 20 kHz |
Maximum SPL | 150 dB (A-Weighted) |
Sensitivity | -56.5 dBV/Pa (1 kHz) |
Sensitivity | S for Standard Gain/Close Miking (I2) |
Equivalent Noise Level | 38 dB (A-Weighted) |
Connectivity | |
Analog Output | 1x LEMO 4-Pin |
Cable Length | 5' / 1.52 m |
Power | |
Power Sources | Phantom Power |
Operating Voltage | 6 to 50 V (Phantom Power) |
Physical | |
Color | Black |
Environmental Resistance | No |
Dimensions | H: 0.16 x W: 0.28 x L: 0.44" / H: 3.5 x W: 7 x L: 10.5 mm (excluding Cable Strain Relief) |
The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.
Flexible close miking techniques can be aided by the various selection of instrument mounts (sold separately), which position securely and gently to strings, brass, and more.
Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning, and consistent patterns.
A microphone with a figure-8 (bidirectional) pickup pattern is sensitive to sound coming from the front and coming from the rear, but has a very high rejection for sound coming from the sides. Great for mid/side and Blumlein stereo applications.
Related Questions and Answers
Q: 1. Do I need a receiver for this transceiver to work with the metz 52 af-1 flash?
A: Yes you do.
Q: 2. Can the WT-1T be used as a Receiver?
A: Yes. The following unit is a combination Transmitter and Receiver.
Q: 3. Have a Sony HVL60 Flash. Would like to make this flash totally wireless without purchasing the HVL60-FM wireless unit. Will both units work with a Sony RX10M4 camera?
A: You would need a minimum of two WT-1T units: one for the camera and one for the HVL-F60M flash. It is possible that is can work on the RX10 Mark IV, but it has not been tested to our knowledge.
Q: 4. Does this lens foot accept Quick Detach (QD) sling mounts?
A: Unfortunately, the Wimberley Replacement Foot for Nikon 200-400 f/4 VR I & II, Nikon 300 f/2.8 VR & II, and Nikon 500 f/4 VR FL Lenses does not have a QD socket.
Q: 5. with the Nikon AF-S 500mm f/4 VR II Lens?
A: While the AP-551 does not fit your lens, the Wimberley AP-554 Replacement Foot for Nikon 500mm f/4 AF-S (I, II & VR) and 200-400mm f/4 AF-S (VR) Lenses, BH #WIFN • MFR #AP-554 is compatible. https://bhpho.to/2GI1UVl
Q: 6. Will this item work as a receiver from a Godox TT685iiS flash and mount a Sony HVL- Have a Godox TT685iiS flash that I would like to use as a master flash and mount on camera. Have the camera setup as a master, flash turned off, and the G Godox Flash set at ch 02 Group A. Would like to use the WT-1T as the receiver and set it as the receiver to slave, Ch 02, Group A and install the Sony HVL-F60M flash on top of the Metz WT-1T as my second flash. Will this work as my second flash? The camera I am using is a Sony RX10M4
A: No. The following two systems have to different protocol systems so they will not communicate properly together.
Q: 7. Compatible with Nikon 180-400 f/4 or not?
A: Yes, the Wimberley Replacement Foot for Nikon 200-400 f/4 VR I & II, Nikon 300 f/2.8 VR & II, and Nikon 500 f/4 VR FL Lenses, B&H # WIRFNAP551, would be compatible for use with the Nikon AF-S NIKKOR 180-400mm f/4E TC1.4 FL ED VR Lens.
Q: 8. will the hood still reverse with this foot?
A: When you use the Wimberley Replacement Foot for Canon 300 f/2.8 IS II, 200-400 f/4 IS, 500 f/4 IS II, and 400 f/4 DO IS II Lenses you will still be able to reverse the lens hood.
Q: 9. Which Sony camera shoe is this compatible with old A's or newer MIS as on A7. If the latter, can I then use a HVL 42AM (old style) on top of the transceiver?
A: The Metz WT-1T Wireless Transceiver for Sony, B&H # MEMZWT1TS, listed above uses the Sony Multi-Interface hot shoe both on the bottom and top hot shoe. If you wish to use the WT-1T on an older Sony Alpha camera that uses the (now discontinued) Minolta Auto-Lock hot shoe design, you may purchase the Sony Auto-Lock Shoe Adapter, B&H # SOADPAMA, to connect the Metz WT-1T to your camera. If you wish to connect an older Auto-Lock hot shoe flash such as the Sony HVL-F42AM Digital Camera Flash to either the WT-1T or the WT-1R, you would need to purchase the Sony Multi Interface Shoe Adapter, B&H # SOADPMAA, for your usage needs.
Q: 10. Will this foot work with the canon 500mm f/4 IS lens
A: Unfortunately Wimberley AP603 is not compatible with that lens, only with the version 2: Canon 500 f/4 IS II.
Top Bestselling Products
Brother Wt-223cl Waste Toner Box
$95.97 $136.28
Brother Waste Toner Box
$79.47 $124.77
Polarpro Bluemorphic Filter For Matte Box (4 X 5.65", Blue)
$599.97 $887.96
Tap 8 X 10" Black Leather Portrait Box (1" Depth, Case Of 40)
$269.37 $363.65
Brother Sp1 Sublimation Printer
$1,199.97 $1,703.96
Epson Workforce Pro Wf-7820 All-in-one Inkjet Printer
$899.97 $1,187.96
Lexmark Ms621dn Monochrome Laser Printer
$2,367.00 $3,645.18
Aten Usb To Parallel Port Printer Cable
$55.50 $75.48
Brother Hl-l3300cdw Digital Color Multifunction Printer
$1,109.97 $1,487.36
C2g Cat 6 Snagless Unshielded Patch Cable (9', White)
$26.97 $33.71
Products You May Like
Electro-voice Evid-c4.2lp - 4" Low-profile Ceiling Speaker (pair, White)
$1,167.00 $1,435.41
Nanuk 923 Hard Case With Padded Dividers (orange, 16.7l)
$818.85 $1,195.52
Tiffen 86mm Pro-mist 1/2 Filter
$569.85 $729.41
Amazon Echo Spot Smart Alarm Clock (2024 Edition, Ocean Blue)
$239.97 $333.56
Owc Jupiter Callisto 64tb 16-bay Nas Server (16 X 4tb Hdds)
$44,397.00 $65,707.56
Bigblue Cf450 Adjustable-beam Dive Light (diving Glove, Black)
$419.97 $642.55
Tiffen 6" Round Black Pro-mist 2 Filter
$1,628.85 $2,019.77
Kiloview Rd-350 Decoding Card
$2,097.00 $2,705.13
Fotodiox Pro Beauty Dish For Vivitar Flashes (16")
$164.85 $235.74
Dahua Technology Pfb303w Wall Mount Bracket
$91.74 $123.85
Azden Cm-20h Uni Collar Mic With 4-pin Connector
$300.00 $468.00
Ultralight Tri-leg Extendable Tripod Leg
$284.85 $441.52