Boya By-bm6060 Shotgun Microphone
- Product Code: ga194274
-
Bundled with a furry windshield, a foam windscreen, and a vibration-reducing shockmount for clean audio with minimal extraneous noise, the BOYA BY-BM6060 shotgun microphone offers an affordable solution for videographers, indie filmmakers, and boom operators who need a flexible, full-size shotgun mic on a tight budget.
The supercardioid polar pattern delivers focused pickup in front of the mic and the switchable 150 Hz high-pass filter attenuates rumble and low-frequency handling noise. The mic's low-noise circuitry and wide 60 Hz to 20 kHz frequency response allow quality signal capture for speech, ambient sound, and sound effects. Wind noise can be effectively reduced using the supplied windshield and windscreen.
To ensure reliable operation with a variety of devices such as cameras, mixer adapters, and portable audio recorders, the BY-BM6060 microphone runs on a single AA battery or 12 to 48 VDC phantom power. It utilizes a balanced XLR output for straightforward connectivity.
For Indie Films, TV & Documentaries AA Battery or Phantom Powered Switchable 150 Hz High-Pass Filter Low-Noise Circuitry Wide, Clear Frequency Response Shockmount Impedes Handling Noise Furry Windshield and Foam Windscreen Rugged, Lightweight Housing
Key Specs | |
---|---|
Element Type | Condenser |
Polar Pattern | Supercardioid |
Controls | On/Off, Low Cut/HPF |
Frequency Response | 60 Hz to 20 kHz |
Analog Output | 1x XLR 3-Pin Male |
Power Sources | Battery / Phantom Power |
Microphone | |
Sound Field | Mono |
Element Type | Condenser |
Polar Pattern | Supercardioid |
Orientation | End Address |
Circuitry | Solid-State |
Pad | No |
High-Pass Filter | 150 Hz |
Filter & EQ | Low-Cut Filter: 150 Hz |
Controls | On/Off, Low Cut/HPF |
Performance | |
Frequency Response | 60 Hz to 20 kHz |
Connectivity | |
Analog Output | 1x XLR 3-Pin Male |
Power | |
Power Sources | Battery / Phantom Power |
Operating Voltage | 12 to 48 V (Phantom Power) V () |
Battery Type | 1x AA (Not Included) |
Physical | |
Dimensions | ø: 0.87 x L: 11.02" / ø: 22 x L: 280 mm |
Weight | 4.6 oz / 130 g |
Packaging Info | |
Package Weight | 1.3 lb |
Box Dimensions (LxWxH) | 13.375 x 4.75 x 3" |
Built with an aluminum-alloy housing, the BY-BM6060 offers ruggedness while remaining lightweight, a welcome combination for comfortable use on boompoles.
The BY-BM6060's supercardioid polar pattern delivers focused responsiveness in front of the mic, moderate rejection at the rear, and enhanced attenuation at the sides, making it well suited for recording subjects outdoors or in acoustically treated rooms.
The wide 60 Hz to 20 kHz frequency response of the microphone allows it to accurately capture speech, ambient sounds, and more. The switchable high-pass filter attenuates low frequencies below 150 Hz to help you control difficult bass issues such as rumble and traffic noise.
Able to be run on a single AA battery or 12 to 48 VDC phantom power, the BY-BM6060 can be used with DSLRs, mirrorless cameras, professional camcorders, field recorders, and handheld audio recorders. The XLR 3-pin output provides a balanced, high-quality connection point.
Use the included foam windscreen to control noise from light breezes or indoor turbulence from fans. Switch to the supplied furry windshield for enhanced wind noise reduction when recording outdoors.
The BY-BM6060 comes with a shockmount that decouples the mic from your camera, boompole, or stand, thereby inhibiting vibrations and handling noise.
Related Questions and Answers
Q: 1. Will this work on the new Black Magic Pocket Cinema Camera 4K?
A: Yes it does work all you need is this adapter in the link bellow https://www.bhphotovideo.com/c/product/1537929-REG/kondor_blue_kb_mxlr_16_mini_xlr_male_to.html
Q: 2. When do you expect to ship these?
A: The Rode NTG4+ is currently available and shipping.
Q: 3. How can this microphone claim so much greater directionality (down 14 dB at 60 degrees off-axis) than other shotgun microphones of similar physical length. Is it a typo?
A: The physical length alone does not determine directinality. It is the overal design and engineering that achieves this specification. Ful Specification per RODE: NTG1 SPECIFICATIONS Acoustic Principle Line Gradient Active Electronics JFET impedance convertor with bipolar output buffer Capsule 0.50" Polar Pattern Supercardioid Address Type End Frequency Range 20Hz - 20kHz Output Impedance 50Ω Maximum SPL 139dBSPL Maximum Output Level 6.9mV (@ 1kHz, 1% THD into 1KΩ load) Sensitivity -36.0dB re 1 Volt/Pascal (15.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz Equivalent Noise Level (A-weighted) 18dBA Power Options +24V phantom power+48V phantom power Weight 105.00g Dimensions 219.00mmH x 22.00mmW x 22.00mmD Output XLR Output https://cdn1.rode.com/ntg1_datasheet.pdf Warranty 1 year with free extension to 10 years following registration RØDE USA: PO Box 91028, Long Beach CA 90809-1028 Ph: +1 562 364 7400 Fax: +1 888 412 4664
Q: 4. There appear to be three settings for the high-pass filter: the switch can be positioned towards the front of the mic (bent line symbol), in the middle (straight line symbol), or towards the back of the mic (circle symbol). I gather the bent line represents "hi-pass filter on", the straight line "hi-pass filter off", but what does the circle setting do?
A: The circle setting turns the mic off.
Q: 5. Considering this microphone has an internal battery, it doesn't seem like it would need +48v phantom power. Therefore, would it work with the Sony XLR-K2M XLR Adapter Kit?
A: The NTG4 is able to be powered via internal battery or externally via phantom power from the source. This mic can be used with the Sony XLR-K2M in either manner.
Q: 6. Is this mic compatible with DSLR cameras? I have a Canon 5D mark III and am looking for on on-camera shotgun mic.
A: The NTG1 requires power in order to operate that is supplied by the device the mic is connected to. unfortunately this is not able to be supplied by the cameras mini jack output. For the 5D mkIII and similar cameras you will need an additional adapter that is able to provide the power to the mic such as a Beachtek DXA-SLR ULTRA, which will allow the connection of 2 mics, level control, metering and limiters to protect from overload. Alternatively a battery powered mic will also work directly connected. The NTG-2 would be an example.
Q: 7. is it includes these microphone wind shild
A: It actually comes with the foam windshield. It will the do the job inside, but it's not very effective outside. I recommend buying a separate windshield.
Q: 8. Would this mic work with my Sony adapter for my A7s? It has an xlr in??
A: The NTG4+ will work with an XLR adapter that is able to provide 48 volts phantom power to the mic.
Q: 9. Is PSC A4812 48V Phantom or Sennheiser 12TP48 going to work with Ntg4? I'm looking for something similar or smaller than a box shaped power supply. Thank you.
A: It looks like those should work fine with this unit.
Q: 10. Are there any audio quality differences between the NTG4+ and NTG?
A: Both are excellent
Top Bestselling Products
Boya By-bm2040 Camera-mount Shotgun Microphone
$96.00 $139.20
Boya By-mm1 Mini Cardioid Condenser Microphone
$89.85 $138.37
Sennheiser Mke 440 Compact Stereo Shotgun Microphone
$1,004.70 $1,557.29
Godox Ivm-s2 Camera-mount Shotgun Microphone
$117.00 $168.48
Countryman E6i Cardioid Earset Head-worn Microphone (black)
$1,931.85 $2,762.55
Countryman Isomax 2 All Purpose Microphone
$802.98 $1,228.56
Dpa Microphones 4018a Supercardioid Microphone
$6,120.00 $7,466.40
Sanken Csr-2 Rear Rejection Shotgun Microphone (matte Black)
$4,350.00 $5,568.00
Saramonic Vmic Mini Ultracompact Camera-mount Shotgun Microphone
$177.00 $237.18
Audio-technica At8145 Shotgun Microphone Windscreen
$82.50 $117.15
Audio-technica Bp4073 Shotgun Microphone
$2,247.00 $3,190.74
Zhiyun Transmount Shotgun Microphone
$477.00 $639.18
Rycote Super-shield Kit For Shotgun Mics (large)
$1,128.00 $1,759.68
Products You May Like
Cavision Lfa04x72-hvx-hd100 0.4x Fisheye Lens Adapter
$1,305.36 $2,010.25
Apantac Vga-1x2 Splitter
$419.85 $529.01
Freewell Magnetic Step-up Ring For Vnd System (67-82mm)
$119.97 $188.35
Apple Pencil (usb-c)
$207.00 $308.43
Dnp 4 X 6" Media Set For Ds-rx1hs & Rx1 Printers (2 Rolls)
$599.97 $953.95
Movcam Mm1 Mb - Panasonic Ag-af100 Kit 2 With Mattebox/pl Mount/cine Base M15
$9,648.00 $14,568.48
Permajetusa Gloss 271 Digital Photo Paper (24" X 98.4' Roll)
$464.64 $622.62
K&m 15590 Ukulele Holder
$74.97 $94.46
Just Normlicht Control Cabinet 0b 15/13 With Slanted Work Surface (19.7 X 27.6")
$6,690.00 $9,432.90
Vicoustic Vicwallpaper Vmt Symmetric (blue, 46.85 X 23.43 X 0.39", 8-pack)
$1,707.00 $2,321.52
Surefire Double Logo T-shirt (large, Navy)
$53.88 $68.97
K&m 15262 Flute Stand
$68.97 $99.32
Neewer Mini Photography Light Stand (20", 2-pack)
$80.97 $111.74
Smallrig Extension Arm For Dji Stabilizer
$89.97 $118.76