Charge your NP-F/L-series battery with the CMDual base charger using this NP-F/L-Series Battery Adapter Plate from Blueshape. The adapter plate accepts one NP-F/L-series battery and the plate installs onto one of the slots on the CMDual base charger. You can either purchase two adapter plates to fill both slots on the base charger or you can mix and match with another adapter plate.

1 x NP-F/L-Series Battery Plate    Single Plate for CMDual Charger Base    CMDual Fits 2 x Adapter Plates    For Most DV Battery Packs

Blueshape CMDual battery adapter base

Related Questions and Answers

Q: 1. Can this battery plate charge NP-FZ100 batteries?

A: No, this will charge L-series batteries.

Q: 2. I'm looking for something like this, but reversed. So it would be a Sony battery that screws into a plate, so could mount a monitor using the battery slot. Any ideas?

A: You, Would use a battery if you wanted it reversed. We are not aware of a battery converter plate that would convert a display battery port to another. Some displays however have options for adding plates.

Q: 3. The 12v port is physically smaller than the 7.4v port. I have a 12v on-camera monitor I'm trying to power. What plug to use?

A: The barrel sizes are different on the SmallRig L-Series/NP-F Battery Adapter Plate (Advanced Edition). Cameras powered with a dummy battery cable would typically work with the 8V port. 1 x Barrel 2.5 mm Output 12 V Regulated 1 x Barrel 2.1 mm Output 8 V Regulated

Q: 4. Overview states this can be used with the SmallRig DC5521 to LP-E6 dummy battery power cable 2919 but I cannot find it?

A: For the SmallRig 2.1mm DC Barrel to LP-E6 Dummy Battery Power Cable (23.6") to be used on the SmallRig L-Series/NP-F Battery Adapter Plate (Professional Edition), see the link below: https://bhpho.to/419toHS

Q: 5. What's the best way to attach this to a tripod?

A: The SmallRig L-Series/NP-F Battery Adapter Plate can be mounted to a tripod is a variety of ways. One way would be to use the Impact Atom Clamp with Ratchet Handle Impact Atom Clamp with Ratchet Handle BH #IMME100 • MFR #ME-100 with a Impact Short Double-Male Round Spigot BH #IMSRP109P • MFR #SRP-109P.

Q: 6. this plate work with canon xf100 camera?, replace battery bp 975

A: No, the SmallRig L-Series/NP-F Battery Adapter Plate would not be able to replace the BP battery. We recommend using Canon original batteries, or the Swit model below. SWIT S-8845 7.2V, 47Wh Battery with DC Output (Canon BP-945/970G) BH #SWS8845

Q: 7. would this power an fx30 to usb port with internal battery in place to allow hot swap of 970's?

A: No, the SmallRig L-Series/NP-F Battery Adapter Plate (Professional Edition) would not work well for powering the FX30, as the USB-C output does not support PD (power delivery). You might have better luck using a USB-C dummy battery like the ZILR USB Type-C to Sony NP-FZ100 Regulated Dummy Battery Cable (24")(BH #ZIZRUCDB01 • MFR #ZRUCDB01).

Q: 8. Does this fit the Watson dual charger?

A: No it does not. Watson does not have a BPA charger plates.

Q: 9. Does it come with a USB - C Type cable?

A: No. Does not come with a charging cable.

Q: 10. is the USB-C port PD compatible?

A: The SmallRig L-Series/NP-F Battery Adapter Plate (Advanced Edition) the USB-C is rated at 36W which meets the USB-C PD rating.