You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Rotolight Ultimate Vlogging Kit

Rotolight Ultimate Vlogging Kit
  • Product Code: ga194548
  • Availability: In Stock

$192.00 $272.64

The Rotolight RL48-B LED RingLight Stealth Edition sports 48 ultra-bright Grade-A LEDs with an 80W equivalent. It can be attached onto camcorders and DSLRs for up to 4 hours of continuous light without causing shadows or red eye.

Weather-resistant, weighing 6 oz, and powered by 3x AA batteries, it can be set up and fully functional within 3 seconds. Batteries are not included.

Mount Light & Smartphone on Mini Tripod    Daylight-Balanced Output    Four-Piece Filter Set    Desktop Stand with Ball Joint Head    Runs on 3 x AA Batteries

Light Fixture
Number of LEDs48
Packaging Info
Package Weight0.5 lb
Box Dimensions (LxWxH)10 x 6 x 1.3"

Slides onto and firmly stays put on most shotgun mics. Or, with the use of a Rotolight stand (not included), it can mount onto DSLRs, camcorders, and other equipment via hot shoe or 1/4" - 20 stud.

Contains a Filter-Holder. Included with every RingLight are 3 CTO filters and 3 ND filters which adjust color to 6300K, 5600K, and 4300K and 3200K.

110° beam angle produces a soft, naturally diffuse wide beam that eliminates shadows and red eye.

Can be accurately dimmed over 1.5 stops with the use of included ND filters. A 1 stop and a .5 stop combine using two filters, one for each.

A rubberized outer coating reduces reflectivity and acoustic resonance.

Can close in on a subject as close as 1.5".

Related Questions and Answers

Q: 1. Will this light work with a Canon 6D Mark II?

A: It should, not Im using Nikon D800 and Sony a6000/6300/6500 ,A7/a7s and all work great with elinchrom (el-skyport transmitter) . You also can use a few other models that require a receiver ;goddox , flashpoint, neewer etc. but I dont want to use the extra receiver . Even though the receiver is small I dont want extra baggage if I can help it, plus you have to meet anually set the rotolight but with the elinchrom you can set it up at the camera. Maby I deviated a bit but thats how it works for me.

Q: 2. How long will continuous light mode last on set of batteries?

A: You should expect around an hour from the 6 AA batteries it runs off of.

Q: 3. Is the Rotolight NEO 2 compatible with any light stand?

A: With this adapter you can mount the lamp on 3/8"and 5/8" studs on the top of most stands. Smith-Victor 575 - Universal to Shoe Mount Adapter B&H # SM575.

Q: 4. Can these be used as a slave? I have White Lightning strobes that are triggered with Pocket Wizards. I wanted to add these for side kickers/hair lights. Thanks!

A: Yes. Via 3.5 remote port. The unit can also be controlled by third party commander such as the following units. Godox X1T (use with the Godox X1R receiver) Pixel King Pro - Sony, Canon, Nikon Flashpoint R2 Phottix ODIN II (HSS) – Canon, Nikon, Sony PocketWizard (HSS) : FlexTT5, and FlexTT6 support High Speed Sync (HSS) for Canon and FP Sync for Nikon. Cactus VI II (HSS) : Fuji, Canon, Nikon, Pentax,Olympus, Panasonic

Q: 5. Will this work well with the Canon 5D IV if so will it work with the PROFOTO A1 trigger?

A: Not that we are aware of.

Q: 6. Will it run on continuous light and flash modes simultaneously ? That is to say can it flash at the high power and act as a modeling light between flashes ?

A: The Rotolight NEO 2 Light can run on continuous and flash modes, simultaneously.

Q: 7. If I mount the Elinchrom to the camera hot-shoe, where do I mount the Rotolight?

A: You could put it on a light stand or get an accessory for your camera that allows you to mount multiple accessories.

Q: 8. Will the Neo 2 work for low level lighting? See http://www.lowlevellighting.org for the type of application that I am interested in.

A: This depends on your use-case. The Neo 2 will provide light in the darkness. As long as your subject is close enough, you should get a usable image.

Q: 9. Is it work with OLYMPUS omd em5mII ?

A: Yes, this is is compatible with your Olympus omd em5mii.

Q: 10. Will this work with my Elinchrom triggers bought with the two light kits Elinchrom D-Lite RX 4 ?

A: If the triggers you have support HSS they should work. We recommend the EL-Skyport Transmitter Plus HS for this light. You can select between Canon, Nikon, Sony and Olympic/Panasonic options from this link.https://bhpho.to/2yorRnB

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Eotech Clipir Thermal Clip-on

$36,357.00 $43,991.97

Niceyrig Cheese-style Mounting Plate

$40.80 $61.61

Products You May Like

Dji Matrice 30t Enterprise Drone (plus Combo)

$28,368.00 $39,998.88

Gator Lux Series Dread Gig Bag (gray)

$449.97 $688.45

Tiffen 138mm Mounted Hollywood Star Filter

$1,109.85 $1,686.97

Lumantek Converter Rackmount

$1,197.00 $1,891.26