Compact but powerful, the V-mount IndiPRO Tools 260Wh Micro-Series 26V 260Wh Lithium-Ion Battery can handle power draws up to a maximum 15A continuous draw and features one 26V D-Tap output port. This 260Wh Micro-Series battery is designed for use with pro video cameras, lights, monitors, or other devices on your rig. A 5-LED gauge displays the battery's remaining power.

1 x Micro-Series V-Mount Battery    Quad 26V Lithium-Ion Battery Charger    26V 260Wh Capacity, 15A Continuous Draw    Simultaneous Charger, Carry Handle    Battery has D-Tap and USB Outputs

High-capacity, compact V-mount battery

Supports a maximum continuous draw of 15A

A D-Tap port outputs up to 26V for powering your camera or another component

5-LED power gauge

Related Questions and Answers

Q: 1. which set of batteries will be best for Blackmagic pocket camera 6k pro??

A: The IndiPRO Tools Micro-Series 98 4-Battery Kit with Quad Pro Charger (V-Mount) would work well as a larger battery power source for the Blackmagic Design Pocket Cinema Camera 6K Pro so long as you have the proper mounting hardware to mount the batteries to the camera, and a compatible cable for sending power from the batteries to the camera. The IndiPRO Tools Coiled D-Tap to 2-Pin Cable for Blackmagic Pocket 4K & 6K (18-40") for instance would be a good cable to use to send power from a v-mount battery to the Blackmagic Pocket cameras. See: https://bit.ly/49lCp4w

Q: 2. Will this work on the Sony Fx3?

A: Yes, you will need to use a D-tap to FZ-100 Dummy Battery to connect the IndiPRO Tools Micro-Series V-Mount Li-Ion Battery to the Sony FX3.

Q: 3. How long will these 2 batteries power a 300D at full power in the field?

A: The IndiPRO Tools 2 x Micro-Series 98Wh Li-Ion V-Mount Batteries with Dual V-Mount Battery Charger Kit could power the Canon C300 for a period of 9hrs.

Q: 4. Would this be suitable to use for a Red Camera?

A: It will power the camera and the form factor and auxillary ports locations are good, however, the battery does not support the extra communication with RED cameras, and so cannot show remaining time or capacity on the camera, only a voltage readout.

Q: 5. How long does it take to charge these batteries on this charger (d-tap charger takes about 5 hours to charge one battery... is it the same and if not how long to charge 1 battery, how long for 2 at the same time?)

A: This dual battery charger can charge both batteries simultaneously at a rate of 2.5 amps. This means it would take roughly 3 hours to fully charge 2x 98Wh batteries from this charger.

Q: 6. Can I charge this battery on a regular Gold Mount Charger?

A: a 26v charger is needed to charge this 26v battery this battery is not compatible with 14.8V battery chargers. Please review the following chargers. IndiPRO Tools D-Tap Pro Battery Charger (29.4V, 2.5A) BH #INPD26V • MFR #PD26V https://bhpho.to/3nhcyV0 IndiPRO Tools Quad 26V V-Mount Lithium-Ion Battery Charger BH #INVMQ26V • MFR #VMQ26V https://bhpho.to/3JUVjCK

Q: 7. Does anyone know if this battery is suitable for Apertures 120D (as it draws 135 watts of power) and approximately how long it will power that light at full power for??

A: This battery will work with the Aperture 120D light. You would get around 40 minutes of operation with it. You could always look at a battery with a higher capacity, such as their IndiPRO 170Wh version which should give you over an hour of operating time.https://bhpho.to/2JsPCfK

Q: 8. Could I use two of these to power a 600d pro at 50% for a reasonable amount of time? I work on off grid documentaries

A: The unit will run at a 60% capacity not giving a end-user a 1:1 ratio output.

Q: 9. Is this battery adequate to power the Z Cam E2 ?

A: Yes, this battery would be a great choice to power the Z Cam E2.

Q: 10. Can I charge this battery with a BESTEK 300W Power Inverter DC 12V to 110V AC Car Inverter?

A: The IndiPRO Tools Micro-Series Gold Mount Li-Ion Battery (98Wh) can be charged by power inverters.