The light beige B3 Omni Lavalier Mic, Mid Gain, with LEMO 3-Pin Connector for TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 Wireless Transmitters from Countryman is a water-resistant, miniature lavalier microphone for capturing high-quality audio. It can be used in a variety of applications such as a tie-clip lavalier in interviews, a hair-hidden mic for drama, a water-resistant mic for water sports and hurricane reporting, or simply a small mic to hide in a prop flower vase.

The B3 capsule is resistant to moisture (IP67), which allows for placement in the hair or on bare skin, and its omnidirectional polar pattern minimizes handling noise, wind noise, and plosives (popping). Furthermore, a variety of skin-matching colors are available. This B3's cable terminates to a LEMO 3-pin connector for direct connection to TRX900AA, TRX900LA, TRX900LT, TRX900LTH, TRX900LTHS, TRX900LTS, TRXFB3, TRXLA2, TRXLA3, TRXLT3, and ZMT3 Zaxcom wireless bodypack transmitters Additionally, a carrying case, two cable clips, a windscreen, and three protective caps are also included.

For Interviews, Drama, and Water Sports    LEMO 3-Pin (ZX), See Description    20 Hz to 20 kHz Frequency Response    Headroom for Strong Vocals    Includes 3 Capsule Protection Grids    Windscreen    Cable Clips    Carrying Case

Looks great when you want to see it, virtually disappears when you don't. The B3 is easily hidden in hair or on costumes, with five colors to match clothing, hair, and skin tones. Use a felt tip marker to color the white caps for near-perfect concealability. Never suffer the hassle and degraded sound quality of under-clothing miking again.

The B3 is resistant to makeup, sweat, and moisture when used with the supplied protective caps and works well in hair or on the body. The protective caps are easily removed for cleaning or replacement, and the aramid-reinforced cable gives it world-class survivability.

The B3 provides high-quality audio with low distortion at SPL up to 140 dB for wireless applications. The aramid cable and thin diaphragm combine to offer low handling noise. The flat-frequency response accurately captures voice or instruments, and the small size makes the B3 easy to position for ambient noise and feedback rejection.

Changeable protective caps let you shape the frequency response for different situations or to match other microphones. Versions are available for different speaking or singing styles, with high-overload capability for recording instruments.

Low, head miking for theater.

Related Questions and Answers

Q: 1. I understand that this is has a 3.5mm connection, but can it also work with iOS using a Lightning to 3.5mm adapter? This package is much less expensive than the same package with the Lightning receiver connection ($180 vs. $250.)

A: Yes, you can use the Apple Lightning to 3.5mm Headphone Jack Adapter (B&H # APLAADAP) together with the 3.5mm TRRS cable for mobile devices that is included with the Boya wireless system. The Apple Lightning adapter will enable compatibility to connect the wireless receiver to your iOS device.

Q: 2. If I want to use two of these mics(ie. 2 seperate mics and recievers), will they operate normally? Will they interfere with each other?

A: From what I read and what I was told they should operate perfectly .

Q: 3. In which country it is made / manufactured / assembled in?

A: The Wireless Go and Wireless Go II mic systems are made in Australia.

Q: 4. Does this system record the two audio channels as two seperate audio tracks?

A: The specs do not indicate two SEPARATE audio channels; there is a single audio output listed as a balanced line out (TRS). USUALLY, these types of receivers "mix" the two mics into one channel. IF it does record these separately, it would be as a stereo signal, one mic to the Left, one mic to the Right. This is typical of these types of receivers. That means you MAY have the ability to adjust each mic received separately, however, you would need to move these to the "center" in post production, otherwise the mics would be far left and right, so would not be ideal, as each person on the individual mics would be far left and far right when played back, which may be un-natural when viewing two people in conversation, if they are shown at center in the video. Suggest contacting the manufacturer: .Website http://www.boya-mic.com/ Email support@sevenoak.biz

Q: 5. this system works for the nikon z6 and nikon z50

A: Yes, the Boya BY-WM4 PRO K-2 wireless lavalier microphone system is compatible for use with both the Nikon Z6 and Z50 cameras.

Q: 6. can this be bought with barrel mic instead of the LAV?

A: This kit currently only comes with a lav.

Q: 7. Is the lightning connector fit with iPhone 12 Pro Max with moment case

A: It depends on the design of the case and how much space it provides around the Lightning port to allow the Lightning connector on the wireless receiver from the Saramonic Blink 500 Pro B3 Digital Wireless Omni Lavalier Microphone System for Lightning iOS Devices. if there is not enough space to allow the receiver to rest flush against the iPhone, then you would need to take the iPhone out of the case in order to properly connect the receiver.

Q: 8. types of receiver cables to camera ?

A: The Boya BY-WM4 PRO-K2 includes a 3.5mm TRS to 3.5mm TRS cable for connecting the receiver to a camera. A 3.5mm TRS to 3.5mm TRRS cable is also included for connecting the receiver to a smartphone or tablet. Adapters can be used for compatibility with iPhones that have a Lightning connector and Android phones that have USB-C.

Q: 9. Line in mode

A: Mic in is for when. you are using the internal mic or the included lavalier. Line-level mode is for the connecting the output of line-level devices like a mixer, music player etc to the transmitter.

Q: 10. I have an iPhone 15 pro max which requires a usb-c connector, which adapter do I need to purchase for the receiver?

A: The Saramonic SR-WM2100 2-Person Camera-Mount Digital Wireless Omni Lavalier Microphone System for Cameras and Smartphones (2.4 GHz) can be connected to an iPhone 15 using a 3.5mm to USB-C adapter such as B&H # APMU7E2AMA.