The Astera AX1 Pixel Tube RGB LED Tube Light emits up to 253 lux at 3.3' (5500K) with an integrated battery that is suitable for a variety of uses in film, theater, and event productions. The AX1 features 16 individually addressable LED emitters in a 3.4' long tube that you can mount into a set, on a stand, hang from a grid, or even hold in your bare hand. The AX1 features a CRI/TLCI rating of 88, which provides for good color rendition. The fixture can be used to create a soft, direct light on your subject or as an accent light, as well as a design element in the location or set.

The fixture features five different Dimming Curve modes, as Astera refers to it. The selection of these modes, along with the Pulse Width Modulation dimming of the fixture, enables flicker-free video shooting. The Pixel Tube features an integrated battery that charges in approximately seven hours and has a runtime of 20 hours. It can be controlled remotely by IR, a downloadable app, and wireless DMX. The Pixel Tube has an IP rating of 65 for dust and water ingress when the rubber plug to cover the charging port is in place. The IP65 rating means the fixture is completely dust-tight and impervious to low-pressure jets, which means you can use this fixture in dusty environments and in wet conditions.

Light, Charger, Stand, Eyebolts, Holders    For Multiple Mounting Options    Output: 253 Lux at 3.3' (5500K)    Onboard, DMX, CRMX & App Control    CRI 88 | TLCI 88    Customizable Special Effects    Built-In Battery; Up to 20-Hour Runtime    Allows Vertical Mounting & Hanging    Compatible with Optional Remote Control    IP65-Rated Water & Dust Resistant

• You can use an Astera ARC1 infrared remote control (not included); simply point it at individual lights to set the desired effect.
• The downloadable AsteraApp is an efficient way to quickly create a customized light show using your device. It can group several lights together, address individual lights or groups of lights, and send complex effects with a user-defined color palette to all lights in range. Please note the AsteraBox (not included) is required to control the light fixture through the app. You can also use the Astera ARC2 remote control (not included).
• The light can also be controlled by CRMX wireless DMX, as the built-in receiver is compatible with all LumenRadio CRMX transmitters as well as W-DMX G2, G3, G4, and G4S transmitters, although G4 and G4S are only supported in 2.4 GHz mode.
• You can also use an Astera ART3 Wireless DMX Transmitter to send DMX in the UHF frequency band, although CRMX is the recommended method.

865 to 870 MHz

902 to 928 MHz

2.4 GHz

100% color consistency through any batch. It can hit exact color temperatures and reproduce standard filter gels.

Set the length of your event and be sure that your lights won't run out while still getting the maximum brightness.

Detect all available lights, set them up, check their status, and configure DMX addresses and DMX profiles.

Scrambled PWM (Pulse Width Modulation) technology is used to prevent flickering when filming the lights.

You can switch the Astera AX1 into standby mode to save power and schedule it to wake up when the event starts.

Auto BPM analyzes the beat and matches programs to it; flash buttons can trigger special effects.

The dynamic power-boost feature enables the light to display the maximum brightness at all times and intensify non-white colors.

You can set the fixture's dimming response depending on the application you are using the light for:

• Fast: For pixel mapping and similar applications, it provides a totally unfiltered response.
• Standard: Good compromise between response and smoothness for most applications.
• Halogen: When slow and smooth dimming is required, it emulates the characteristics of a halogen light.
• Theater: It provides a very smooth response and increased dynamics, although some colors are darker in this mode.
• TV: For broadcast and other shows, the dimming response is faster but still smooth dimming. Although this mode produces less blue light due to its fixed white point of 6500K, it also provides increased dynamics, with some colors being darker.

Related Questions and Answers

Q: 1. Is the output in RGB mode the same as in Bi-color mode?

A: RGB outputs are not as bright as the bi color outputs.

Q: 2. When plugged in to USB power, will the light run forever?

A: Yes, connecting the Pavotube II 6C to a USB port can run the light for extended periods. However, the actual time does depend on the type of USB interface whether that is a USB/AC source or a USB battery bank.

Q: 3. Do these have DMX or CRMX?

A: No DMX CRMX, But you can control the Tube with the NanLite RC-1 Remote ControlView NanLite RC-1 Remote Control,

Q: 4. Are there 1/4" screw holes on both ends or just one end? Hard to tell from the photos.

A: Yes it accepts screws on both sides

Q: 5. Do you have an AC adaptor for this item?

A: The Nanlite PavoTube II 6c 2-Light Kit does not use an AC adapter. It can be powered via USB-C.

Q: 6. Could this light be mounted on the wall with a baby pin or other option?

A: You could use a Impact wall plate to mount this to a wall.

Q: 7. Would this be a good light for a painting studio?

A: Yes. Would be a great light to help with painting of a studio.

Q: 8. Do these come with anything to charge the 6Cs?

A: These come with a cable, but not a charger. You can use any USB-C charger.

Q: 9. Are the batteries replaceable?

A: No, following unit features a built in battery.

Q: 10. Does this work with the Nanlite Nanlink Remote?

A: Yes, the Nanlite Nanlink 2.4 GHz Remote Control would be compatible for use with the lights in the Nanlite PavoTube II 6c 2-Light Kit. It will control the brightness of the light as well as change the color temperature. You will also be able to control the HSI with the remote. The effects will be able to be controlled as well, but not as precise as using the NANLINK app. The Nanlite PavoTube II 6c will be compatible for use with the new NANLINK app, but you will also need to update the current firmware on the PavoTube II 6C to firmware version v1.00.11. It is available as a free download on Nanlite's website.