Designed for vloggers, mobile journalists, and videographers, the Movo Photo EDGE-UC-DUO is a compact digital wireless microphone system with two microphones and just one receiver. Easy-to-use with plug-and-play operation, it offers a convenient solution for recording dialog, interviews, and speech with two people talking simultaneously—directly to an Android smartphone or a USB Type-C device.

The ultralightweight EDGE-UC-DUO consists of two, compact bodypack transmitters each with its own lavalier microphone. The mics feature an omnidirectional pickup pattern that offers consistent speech capture, even when the talent's head turns away from the mic. The transmitters are equipped with battery indicators and can accept both mic- and line-level signals.

The system also comes with a small, dual-channel receiver that mounts on and plugs directly into the USB Type-C port of your Android phone. The receiver is equipped with an audio level control and a status LED. You can set it to record in either mono or stereo mode. To ensure that you are capturing a clean signal, you can monitor your mics via the receiver's headphone output while recording.

The EDGE-UC-DUO delivers reliable transmission with a clear sound at a distance up to 200'. The transmitters operate on two AAA batteries, while the receiver is powered by your phone. A hard case is provided to safely store and transport your system.

For Journalists, Vloggers, YouTubers    2 x Transmitters/2 x Omni Lavalier Mics    2-Channel Plug-In Receiver (USB Type-C)    Headphone Monitoring, Mono/Stereo Modes

• The two-channel receiver allows you to use just one receiver to simultaneously receive signals from the two mic/transmitters, saving space on your phone shooting rig.

• Whereas typical analog wireless systems are susceptible to interference from TV and radio waves, the EDGE-UC-DUO digital system avoids that by operating in the 2.4 GHz frequency band, which occupies frequencies beyond those of television, radio transmissions, and UHF wireless microphone systems.
• The system automatically changes transmission frequency to mitigate noise and dropouts at a line-of-sight distance of up to 200 feet. For optimal performance, environments with limited Wi-Fi/2.4 GHz traffic and minimal physical obstructions are recommended.

Related Questions and Answers

Q: 1. Charging

A: The components of the Rode Wireless GO II 2-Person Compact Digital Wireless Microphone System/Recorder are charged over USB via their onboard USB-C connections.

Q: 2. I need to connect to an iPhone 13. Which adapter do I need?

A: To use the Saramonic SR-WM2100 2-Person Camera-Mount Digital Wireless Omni Lavalier Microphone System for Cameras and Smartphones (2.4 GHz) with an iPhone 13 you need this adapter, BH #APLAADAP (https://bhpho.to/49ln8zA).

Q: 3. Do you know if purchasing two sets will cause interference with one another?

A: Depending on the envirnment you are in, you shouod be able to run two of these dual systems together without interference.

Q: 4. Can Rode please explain why there is no gain control for the internal recordings? How do you know what it is being set to and if it is clipping or not?

A: On both the first version of the Rode Go and now on the Rode go II on the bottom of the receiver there's a 3 stage gain level control (0, -12, or -24 dB), for more control you can also use Rode's app.

Q: 5. The original Wireless Go timed out and shut down after 15 minutes if not connected together. Do these auto turn off after X minutes as well?

A: Yes, this one too times out after 15 minutes of inactivity if there is no wireless link

Q: 6. Does this come with small cover for the lavalier mics ?

A: The lavalier micprophones in this it come with windscreens and tie clips.

Q: 7. What are the components that come in the product box?

A: The RODE Wireless GO II Single Compact Digital Wireless Microphone System/Recorder comes with a clip-on transmitter, a dual-channel wireless receiver, two SC20 USB Type-A to USB Type-C cables, an SC5 3.5mm TRS memory cable, two furry windshields, and a carry pouch.

Q: 8. If you have two of these, how do you record 4 outputs? Do you need buy external recorder?

A: Yes, A 4 channel recorder is needed to have 4 individual "tracks".

Q: 9. Can you purchase xlr cables over a phono jack?

A: For the output you can easily convert the 3.5mm to XLR with an inexpensive XLR adapter, like the Saramonic C-XLR. Or if you'd like a cable you can use the Saramonic SR-UM10-C35XLR, it has a locking 3.5 mm connector but that will not impede you using it with the SR-WM2100 receiver. https://www.bhphotovideo.com/c/product/1540721-REG/saramonic_c_xlr_3_5mm_trs_female_to_xlr_male.html https://www.bhphotovideo.com/c/product/1443722-REG/saramonic_sr_um10_c35xlr_replacement_locking_type_3_5mm_to.html

Q: 10. types of receiver cables to camera ?

A: The Boya BY-WM4 PRO-K2 includes a 3.5mm TRS to 3.5mm TRS cable for connecting the receiver to a camera. A 3.5mm TRS to 3.5mm TRRS cable is also included for connecting the receiver to a smartphone or tablet. Adapters can be used for compatibility with iPhones that have a Lightning connector and Android phones that have USB-C.