The black I2 Bass and Cello Microphone Kit with LEMO 4-Pin Connector for Telex WT-200, WT-400, and WT-450 Wireless Transmitters from Countryman is a mic that has been built from the ground up for smooth frequency response, low noise, and precise polar patterns with deep nulls and natural on- and off-axis response. It can be used to capture natural audio for this instrument.

The I2 microphone is suitable for distance miking that is invisible in front of audiences and on camera. This version features increased sensitivity for distance miking and captures detail for quieter instruments. Flexible close miking techniques are aided by the bass and cello mount, which sits securely behind the bridge with a positioning arm for placement. In addition, the 5' cable is hardwired to the mic and terminates with a LEMO 4-pin connector for direct connection to Telex WT-200, WT-400, and WT-450 wireless bodypack transmitters.

Hypercardioid Polar Pattern    For Instruments and Sound Reinforcement    Hardwired Connector    Natural On & Off-Axis Frequency Response    For Uncolored Recordings    Reduced Feedback Issues

The I2 maintains excellent pattern control and frequency response at all angles. It offers uncolored recordings and reduced feedback issues.

Flexible close miking techniques are aided by the instrument mounts, which position securely and gently on the instrument for capturing audio.

Small size and sonic precision makes this microphone suitable for X-Y, M-S, and other techniques that rely on accurate, coincident positioning and consistent patterns.

The hypercardioid polar pattern has a narrower pickup pattern in its front than the cardioid polar pattern. It offers better rejection of ambient noise and the working distance is about twice that of the omni polar pattern. The hypercardioid has a small "pickup lobe" directly behind the microphone and exhibits maximum rejection areas behind and to the sides (about 60 degrees away from the rear of the microphone on either side) of the mic. The hypercardioid pattern works best when the loudest unwanted sounds—like speakers—can be positioned in these nulls.

Related Questions and Answers

Q: 1. Will this work with the Nikon D5200?

A: The Vello FreeWave Wireless Remote Shutter Release for Nikon DC-2 Connection is fully compatible with any Nikon camera with the DC-2 connection. So, it will be fully compatible with the Nikon D5200.

Q: 2. What if I want to use flash at the same time?

A: You would need to use a straight flash bracket and put the receiver off the hot shoe. Vello makes one that will work. http://bhpho.to/19fUS2x

Q: 3. Does this work with a Canon 50D?

A: I would expect it to work. It works great with my 30D.

Q: 4. Has anyone used this on the Nikon d3200?

A: I use it on a Nikon D7100 and it works fine for up to a few meters, very helpful if you do not have an assistant to help for a day. It focuses on automatic and that helps if you need to be holding a reflector etc.

Q: 5. can you change the receiver that the transmitter is linked to? e.g. I need a second mic, can I just by another single kit?

A: If you need two wireless microphones, you can get the RODE Wireless GO II 2-Person Compact Digital Wireless Microphone System/Recorder (B&H # ROWGII) which includes two transmitters that will both send audio to the same receiver. Or if you already have the RODE Wireless GO II Single Compact Digital Wireless Microphone System/Recorder, you can use a second wireless mic system. It is possible to use two of the Wireless GO II Systems at the same time, and it is also possible to connect them both to a camera with a single 3.5mm mic input by using a mini mixer like the Kopul CMX-1-V2 Two-Channel Mini Mixer with Shoe Bracket (B&H # KOCMX1V2).

Q: 6. Would this work with lumix S1?

A: Yes this Vello Freewave Remote Shutter Release is compatible with the Panasonic Lumix DC-S1.

Q: 7. Do you have to plug in the shutter release cable's sub-mini plug if you are using it wirelessly? Thank you

A: You do need to have the receivers cable plugged into the sub-mini accessory port in order to use the FreeWave Wireless Remote Shutter release.

Q: 8. What is the longest exposure time possible?

A: I think as long as you want in bulb mode.

Q: 9. Does it work with a time function on the d5200?

A: The Vello FreeWave Wireless Remote Shutter Release for Nikon DC-2 Connection is a basic remote shutter. If you set the exposure from the camera the remote will set off the camera like as if you touched the shutter button. Now if you want the remote to have additional features like time laps this one can do that Vello Wireless ShutterBoss II Remote Switch with Digital Timer for Nikon DC2 Cameras B&H # VERCWIIN2 MFR # RCW-II-N2.Or if you have an Iphone or Ipad this can do the job Vello Bluetooth ShutterBoss Advanced Intervalometer for Nikon Cameras B&H # VERCBTN MFR # RCB-TN.

Q: 10. Is the device compatible with a Nikon D750?

A: This remote is for Cannon cameras. There is a Nikon version of this remote that will work on your D750. There is wire from the remote that plugs into the camera. Nikon uses a different plug than Cannon.https://a href= http://www.bhphotovideo.com/c/product/750015-REG/Vello_RW_N2_FreeWave_Wireless_Remote_Shutter.html target= _blank www.bhphotovideo.com/c/product/750015-REG/Vello_RW_N2_FreeWave_Wireless_Remote_Shutter.html/a