Install up to four quarter-rack size Atlona units such as video extenders, transmitters, or receivers onto a 1 RU rack using this Multi-Extender Rackmount Shelf from Atlona. The shelf features slots for four quarter-rack units that install using screws that connect the back of the units to the shelf. There are slots that allow you to run through cables and cable ties are included to manage the cables. A support bar comes pre-installed for additional bottom support.

Full 1 RU Rackmount Shelf    Fits 4 x Quarter-Rack Width Units    Slots for Cables and Tie-Downs    Each Unit Installs with Screws on Back

Atlona:

AT-AVA-EX70-2PS-KIT

AT-AVA-EX70-KIT

AT-AVA-EX70C-KIT

AT-AVA-EX70C-BP-KIT

AT-AVA-EX100CE-BP-KIT

AT-OME-EX-KIT (TX only)

AT-OME-EX-TX

AT-OME-EX-KIT-LT

AT-OME-RX11

AT-HDR-EX-70-2PS

AT-HDR-EX-70C-KIT

AT-HDR-M2C

AT-UHD-EX-100CE-KIT

AT-UHD-EX-100CE-TX

AT-UHD-EX-100CE-TX-PD

AT-UHD-EX-100CE-RX

AT-UHD-EX-100CE-RX-PSE

AT-UHD-EX-70-2PS

AT-UHD-EX-70-KIT

AT-UHD-EX-70C-KIT

AT-UHD-EX-70C-TX

AT-UHD-EX-70C-RX

Related Questions and Answers

Q: 1. Does the Canon RF Extender 1.4x change minimum focal length of a lens?

A: Teleconverters will change the minimum and maximum focal length of a lens. However, they will not affect the minimum focus distance.

Q: 2. Can I use this extender with the Canon RF 100-400 F5.6-8 IS USM lens?

A: Yes, you can use the Canon Extender RF 1.4x with the Canon RF 100-400mm lens.

Q: 3. Does this extender does the glass on Canon's RF 100-500 when zoomed out to 300mm?

A: While I do not quite understand the question due to the way it is worded, when using the Canon Extender RF 2x, the Canon RF 100-500mm f/4.5-7.1L IS USM Lens can only be operated within the 300-500mm focal length range. Before attaching the 2x Extender, use the lens' zoom ring to set the focusing distance between 300mm and 500mm, then attach the extender to the lens. The lens may then be attached to the camera. Attaching the extender forcibly with the focusing distance set between 100mm to 300mm may result in malfunctions or other damage.

Q: 4. Can this converter be used with the RF 24-240mm?

A: No, so far this converter only works with; RF 100-500mm f/4.5-7.1L IS USM (can only be used within 300-500mm range) RF 600mm f/11 IS STM RF 800mm f/11 IS STM

Q: 5. Is it weather-sealed?

A: Yes it is weather sealed.

Q: 6. It mentions some lens compatibility with the three new lenses. Does it work with the 70-200 mm 2.8 lens?

A: No, it is only compatible with the RF600mm F11 IS STM, RF800mm F11 IS STM and RF100-500mm F4.5-7.1 L IS USM lenses.

Q: 7. Will this work (fit) with the EF/RF adapter allowing it's use with EF telephotos?

A: No, it will not work in that fashion.

Q: 8. Why in the world would this not work with the RF 70-200 2.8 Please tell me they just overlooked this?

A: Unfortunately, the RF 70-200 2.8 's rear glass give the converter no space. So it isn't compatible.

Q: 9. CAN IT WORK FULLY WITH RF 70-200 F 2.8 LENS?

A: Unfortunately not. Currently there aren't any Canon Teleconverters that work with the Canon RF 70-200mm f/2.8L IS USM Lens.

Q: 10. for a RF 100-400 lens, would it be better to use a 1.4 extender or a 2.0 extender?

A: For the Canon RF 100-400mm f/5.6-8 IS USM Lens both the Canon Extender RF 2x and the Canon Extender RF 1.4x are compatible with the lens. It is important to note that you must extend the lens past 200mm in order to mount the 2x converter. While both are compatible with the lens and can be used for all focal lengths, the 2x converter will lose 2 stops of light (leaving you around f/11 when using it with the 100-400mm lens).