Between its 5x zoom range and large objective lens, the Meopta 2-10x42 Optika5 Rimfire Riflescope meets the needs of hunters and shooters at close and long ranges. This version of the Optika 5 has been specifically designed for rimfire rifles, with an adjustable parallax from 10 yards to infinity making it highly accurate at varied ranges. The generous 42mm objective and MeoBright anti-reflective multicoatings assure a bright, sharp sight picture even in lower-light conditions. The reticle, located on the second focal plane, is optimized for the scope's near and far capabilities and provides accurate aiming without obstructing the target or cluttering the field of view. Impact point corrects at 1/4 MOA per click of the capped, low-profile turrets, with total elevation and windage adjustment of 60 MOA inside the 1" maintube. MeoDrop hydrophobic coating repels water, grease, skin oils, and lens surface contaminants that could impair clarity.

Simple Reticle Design, 2nd Focal Plane    1" Diameter Maintube    1/4 MOA / Click Impact Point Correction    60 MOA Windage/Elevation Adjustment    Capped Low-Profile Turrets    MeoBright & MeoDrop Lens Coatings    Nitrogen-Filled, Water and Fogproof    Anodized Aluminum Construction

• 1:5 zoom system provides a wide magnification range with smooth transitions, allowing users to scan the terrain on low power and zoom in for positive identification and accurate shot placements
• At the low 2x power users can enjoy near reflex sight acquisition and tracking at close range with the ability to dial up the magnification for long-range shooting
• Generous 42mm objective lens gathers the light required for bright sight picture even in lower-light conditions and helps to maintain a wide exit pupil and long eye relief
• Ion-assisted MeoBright multicoating maximizes light transmission to deliver enhanced low-light performance, while suppressing reflection and glare
• Hydrophobic MeoDrop coating repels water, grease, skin oils, and lens surface contaminants
• 55.7-foot field of view at 2x, 11.5 feett at 10x

• Second focal plane placement: reticle appearance won't change as magnification moves power up and down, it appears the same at all power settings. Subtensions are accurate at one magnification and will need to be adjusted at others
• Traditional duplex crosshair design
• Long thick outer posts with thin center hairs
• The post/hair configuration ensures clear aiming points at all magnifications without obstructing targets—even small ones at long range

• Low-profile capped elevation and windage turrets
• 1/4 MOA per click impact point correction
• 60 MOA windage and elevation adjustment range
• Parallax is fixed at 100 yards

• 1" maintube
• Lightweight and durable aluminum housing
• Matte black anodized finish reduces reflections and flares that can give away a position
• Nitrogen-filled and sealed to be waterproof and resistant to internal fogging when moving through extreme changes in temperature and environmental conditions
• 12.1" long
• Weighs 20.8 oz

Related Questions and Answers

Q: 1. Is there any such thing as lens caps for these bad boys or would the best bet be lens hoods?

A: Yes, the Canon 10x42 L IS WP Image Stabilized Binoculars can take standard 52mm lens caps.

Q: 2. Is there anything like this that can also record video & has a range finder? Thanks for any leads

A: Currently, there are no similar products to the Canon 10x42 L IS WP Image Stabilized Binoculars (BH # CA10X42L) that offer recording and a rangefinder.

Q: 3. I added lens hoods to protect the objectives but now the binoculars no longer fit in the case. Any recommendations for an alternative one?

A: I recommend the following: two 52 mm screw-in UV filters (I went for the B+W No. 010 MRC Master filters [a bit of "overkill," but they are excellent) and a pair of Canon 52 mm "pinch-style" lens caps (which fit securely when used with the B+W filters). I find this combination works well, looks good, and allows easy insertion of the entire assembly into the case. I have never understood the need for bulky lens hoods in this application, since the optics are very flare-resistant in the first place, and the filters protect the front surface of the objective lenses at all times. For the B+H filters see: https://www.bhphotovideo.com/c/search?q=B%2BH%2052mm%20UV%20Master%20filters&sts=ma For the Canon 52 mm pinch-style lens caps see: See: https://www.bhphotovideo.com/c/product/883410-REG/Canon_6315b001_E_52_II_Lens_Cap.html https://www.bhphotovideo.com/c/product/883410-REG/Canon_6315b001_E_52_II_Lens_Cap.html

Q: 4. Are these waterproof? How do these stand up in rain?

A: The optical tubes are O-ring sealed and argon filled to be waterproof and resistant to internal fogging if the weather turns or they take an accidental spill in a stream or puddle.

Q: 5. WIll this work on a M1 Macbook Max using this enclosure: Sabrent Thunderbolt 3 to M.2 NVMe SSD?

A: Yes, the Samsung 2TB 980 PRO PCIe 4.0 x4 M.2 Internal SSD, (B&H # SAMZV8P2T0B), will work on a Macbook Pro M1 Max using the Sabrent Thunderbolt 3 to M.2 NVMe SSD Tool-Free Enclosure, (B&H # SAECT3NS).

Q: 6. In which country is UHD binoculars made?

A: The country of origin for the Vortex 10x42 Razor UHD Binoculars BH #VO10X42RUHDB • MFR #RZB-3102 is Japan.

Q: 7. I tried one of these earlier this year and found the zoom was very hard to turn on this eyepiece. I am wondering if I got a lemon the first time? Can anyone comment? Thanks

A: We can see from the reviews of people using that zoom Eyepiece, that eyepiece usually zooms easily.

Q: 8. Does the Monarch M5 have better optica than the original Monarch 5?

A: No the Monarch M does not have better optics than the Monarch 5. I does have a slightly larger field of view and a newer type of optical coating on the elements.

Q: 9. Where are these binoculars made? Are the ocular lens covers rain guards or individual caps?

A: These are made in Czech Republic, and they come with Ocular Caps that tether through the Strap. So they are not two separate Ocular Covers.

Q: 10. Best regards. This prate works with the HP Z4 G4 Series Tower Workstation (Avid Certified) BH # HEZ4G4AVID2 MFR # Z4G4AVID-2. ? Thanks

A: Yes, the Samsung 2TB 980 PRO is fully compatible with the HP Z4 G4 series Tower Workstations.