Keep critical equipment powered with the SRT3000RMXLA Smart-UPS SRT 3000VA Rackmount UPS from APC. Featuring one L5-30R and eight NEMA 5-20R outputs, this uninterruptible power supply is designed to keep important gear powered during power surges, spikes, or other disturbances. In addition to a 3000 VA or 2700W output, this UPS also features a surge rating of 340 joules, preventing currents over 30A from damaging connected equipment.

The APC SRT3000RMXLA utilizes double conversion online technology and a sine waveform. Featuring a capacity of 454 VAh, the included battery has a recharge time of three hours. Two communication ports are also present, including one USB Type-A and one RJ45. This UPS uses a 2 RU form factor allowing it to fit compatible server racks using the included mounting hardware. The integrated SmartSlot can also be used with other optional hardware for greater control.

8 x NEMA 5-20R Battery Backup Outlets    1 x NEMA L5-30R Battery Backup Outlet    1 x SmartSlot    3000 VA / 2700W Output    120V @ 50-60 Hz Input    340-Joule Surge Energy Rating    3-Hour Recharge Time    Double Conversion Online Topology    Sine Waveform    2 RU Rackmount Form Factor

Provides early-warning fault-analysis on batteries, enabling timely preventive maintenance.

Operating mode that bypasses unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.

Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Text and mimic diagrams that display modes of operation, system parameters, and alarms.

Protects the initial investment in the UPS when migrating from tower to rackmount environment.

Periodic battery self test ensures early detection of a battery that needs to be replaced.

Warns when a battery is not available to provide backup power.

Provides notification of changing utility power and UPS power conditions

Provides early-warning fault analysis ensuring proactive component replacement.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Install maintenance releases of firmware remotely using FTP.

Prolongs battery life by regulating the charge voltage according to battery temperature.

Maximizes battery performance, life, and reliability through intelligent, precision charging.

Allows additional run time to be quickly added as needed.

Automatically starts up the connected equipment upon the return of utility power.

Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

Supplies utility power to the connected loads in the event of a UPS power overload or fault.

Customize UPS capabilities with management cards.

Enables centralized management via the APC InfraStruXure Manager.

Provides management of the UPS via a serial port.

Quickly understand unit and power status with visual indicators.

Provides remote power management of the UPS over the network. Includes Powerchute Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.

Easy recovery from overloads with no need to replace a fuse.

Protects connected loads from surges, spikes, lightning, and other power disturbances.

Minimizes installation costs by enabling the use of smaller generators and cabling.

Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Provides temporary battery power when the utility power is out.

Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.

Ensures clean, uninterrupted power to protected equipment when generator power is used.

Related Questions and Answers

Q: 1. Are these softboxes attached using a speed ring and can they be rotated 360 degrees?

A: The softbox mounts to a ring on the fixture. It can be used in either orientation.

Q: 2. How many RU does this adapter take up?

A: The Zoom RKL-12 Rackmount Adapter takes up 6 RU.

Q: 3. what is the material? is it aluminum?

A: Yes, this tripod is made of aluminum with rubber and plastic components.

Q: 4. Are you able to do any keying of a green screen in order to stream a keyed signal with this product?

A: This is a panel designed to work with select Blackmagic Products for additional controls, it is not a capture device or converter by itself. For additional assistance feel free to email us directly at askbh@bhphoto.com.

Q: 5. Can these lites be used with a power pack for out door Portraiture Battery to power the lites ???

A: Yes, these lights can be powered outdoors by using an inverter like the Photogenic Ion, B&H # PHIIBCK. Please see the image below for reference.

Q: 6. Will this support Windows 10?

A: Yes, it's just a UPS (nothing to do with OS's), you can use it with or without management software.

Q: 7. Can this be used with film cameras?

A: The Photogenic StudioMax III 3-Light Portrait Studio Kit (120V) can be used with film cameras yes.

Q: 8. Can the L20 be mounted in either direction in this rack? For my application I need the deep part of the rack at the top of the mixer.

A: You can mount the Zoom RKL-12 Rackmount Adapter for LiveTrak L-12 and L-20 Digital Consoles so that the taller side of the Zoom LiveTrak L-20 Digital Mixer & Multitrack Recorder is either on the top or the bottom.

Q: 9. Is there a hole in the reflector for an umbrella to fit through?

A: Yes there is!

Q: 10. can I keep a sdi feed on 1 and input a lower third using this product and the web presenter

A: While you will be able to switch between the SDI and HDMI inputs when using this panel with the Blackmagic Design Web Presenter, B&H # BLWEBPTR, you will not be able to key the HDMI signal over the SDI signal. That is not possible.