Outfitted with a wide parallax adjustment range for precision shooting at mid to long ranges, the Meopta 2.5-15x56 MeoStar R2 RD PA Riflescope optimized for low light performance.

Its optical system features elements that are not only ground and polished with high precision to deliver superior performance and high edge-to-edge clarity, but also treated with layers of optical coatings including MeoLux for high transmission and low glare, MedShield for anti-scratch performance, and MeoDrop for hydrophobic and oleophobic action. To ensure first-shot accuracy, the turrets adjust at a precise 1/4 MOA per click with 55 MOA of travel on both windage and elevation. Capped low-profile MeoTrak II turrets provide audible and tactile feedback, further helping adjustment accuracy and easy return-to-zero.

To match the precision and quality of the optical system, the housing is manufactured from a strong and durable aluminum alloy and treated with Meopta's ELOX scratch- and abrasion-resistant anodized finish. It features a single-piece 30mm maintube that is filled with nitrogen and sealed for fog and waterproof performance.

2nd Focal Plane Reticle Placement    Eight Reticle Intensity Levels    1/4 MOA/Click Impact Point Correction    55 MOA Windage & Elevation Adjustment    Capped Low-Profile MeoTrak II Turrets    ELOX Anodized Aluminum Housing    MeoLux Anti-Reflection Multicoatings    MeoDrop and MeoShield Lens Coatings    Nitrogen-Filled, Water and Fogproof    Runs on One Included CR2032 Battery

• Broad 2.5-15x zoom range is optimized for mid- to long-range shooting and hunting, providing the ability to take in vast portions of the terrain on low power with the ability to dial up the magnification for positive identification and precise shot placement
• Large 56mm objective is optimized for low-light applications, ensuring views are crisp and bright in dim pre-dawn and late dusk or when viewing targets at extreme distances on maximum magnification
• Ion-assisted MeoLux multicoatings push light transmission to 99.8%, delivering enhanced low-light performance, while suppressing reflection and glare
• MeoShield coatings protect external lens surfaces and resist scratching and abrasion
• Hydrophobic MeoDrop coatings repel water, grease, skin oils, and lens surface contaminants that can impair view clarity
• Wide exit pupil at most magnifications ensures complete coverage when the pupil fully dilates in low light to keep the entire scene in view with crisp and sharp resolution
• Generous eye relief at all powers provides a comfortable eye box that reduces eye strain during extended use
• 45-foot field of view on 2.5x, 7.5 feet on 15x

• Second focal plane placement: reticle appearance won't change as magnification moves power up and down, it appears the same at all power settings
• Modified duplex design presents a clear and uncluttered field of view
• Easy-to-see center red aiming dot is clearly visible in all light conditions and at all magnifications
• Short, thick posts direct the eye toward the center hairs, and can be used for large targets at close range
• Long center hairs are ideal for medium to long ranges for accurate shot placement without obstruction targets or interfering with the field of view
• Ballistic drop compensation lines on the bottom vertical axis enable precise shot placement at different distances, subtensions are accurate at only magnification
• Reticle is etched on glass for a crisp presentation, longevity, and optical alignment
• RedZone red dot illumination provides 8 levels of intensity for crisp visibility in all light conditions
• Low profile turret control provides rapid illumination selection with intermediate off positions between each level
• Runs on one included CR2032 battery

• Fast-focus MeoQuick eyepiece brings your target into sharp focus and provides extra diopter travel to accommodate a wider range of visual acuities
• ±3 diopter correction range
• 1/4 MOA impact point correction
• 55 MOA windage and elevation adjustment range
• Capped turrets are protected from dust, dirt, water, and impacts
• Posi-click finger-adjustable MeoTrak II windage and elevation turrets deliver precise adjustments with easy repeatability; positive tactile and audible clicks ensure accurate return-to-zero in the field
• Parallax adjustment turret, adjustable from 11 yards to infinity, allows precise shot placement at all distances
• M59x0.75 objective lens threads accept filters like polarized and neutral density for enhanced views and clarity in extreme conditions such as in snow or on/near water

• 30mm maintube diameter provides the strength required to hold up to heavy recoil while providing the room for the wide turret adjustment range
• Lightweight and durable aluminum alloy maintube
• Scratch- and abrasion-resistant ELOX anodized finish
• Erector system designed to provide maximum holding force and withstand heavy recoil
• Nitrogen-filled to be waterproof and resistant to internal fogging when moving through extreme changes in temperature and environment
• Length: 14 inches
• Weight: 24 ounces

Related Questions and Answers

Q: 1. Once the Sony AG-R2 grip is attached to RX100M3 camera, is it permanent or can the grip be removed without causing damage to the camera?

A: yes it can be removed and reused later without damaging the camera. no issues have done 2 times.

Q: 2. It was necessary to remove this grip due to a return of my RX100 M5 due to a defect. I will be receiving a replacement RX100 M5. Does anyone know what type adhesive tape I can use when I refit my current grip on the replacement camera?

A: I would say the best product to use would be 3M branded double sided sticky pads or tape

Q: 3. I like that this camera easily slides into and out of my pocket when traveling, will the grip make this more difficult? Presumably it is made of a rubberized material. Or is it?

A: The Sony AG-R2 Attachment Grip is manufactured from rubberized elastomer and polycarbonate plastic. It will depend on the size and shape of your pocket if the Sony AG-R2 Attachment Grip will be able to slide easily into your pocket. However, if there is enough room in your pocket, the camera should still be easily accessible.

Q: 4. Will this fit a Manfrotto 200pl quick release plate

A: The Oben QRA-R2 Quick Release Assembly with RP-20 Plate would not be compatible with the Manfrotto 200PL (RC2 system) plates.

Q: 5. Will it fit the RX100 VII ?

A: Yes this will fit RX VII

Q: 6. Will this work with a Manfrotto Element monopod?

A: Yes, Oben QRA-R2 Quick Release Assembly with RP-20 Plate will work with Manfrotto Element MII Aluminum Monopod.

Q: 7. Just how thick is the added bump?

A: Sony AG-R2 Attachment Grip is 8mm thick.

Q: 8. Will it work with the 3 punks tripod?

A: Yes but not sure why you want to add a quick release onto a tripod that already has a quick release.

Q: 9. Will this fit the RX100 V?

A: Yes, the AG-R2 camera grip will fit the RX100 V.

Q: 10. Will this work on crane v2?

A: Yes it will. This quick release system can be mounted on to the Crane V2.