Protect your Pioneer DJ DDJ-800 and rack gear at the gig and during transit with the black-on-black ProX XS-DDJ800 WLTBL, an ATA-300-style flight case equipped with rubber wheels and a built-in 1 RU equipment rack. The 3/8" plywood construction is topped with the Honeycomb Digital laminated surface design, aluminum tongue-and-groove trim, and steel ball corners.

The interior features high-density foam to cushion your controller and offers extra storage space for cables and accessories. Since the case's front panel is removable, you can leave your DDJ-800 in the case during live performances and still access its front-panel jacks.

Padlock-ready recessed butterfly twist-lock latches keep the case securely closed, while the spring-action recessed handles make it easy to carry or roll around. When in its normal stationary position, the case is prevented from sliding by the four industrial-grade rubber feet on the bottom.

Flight Case for Pioneer DJ DDJ-800    Built-In 1 RU Equipment Rack    Laptop Shelf and Removable Front Panel    Laminated 3/8" Plywood Construction    High-Density Foam Interior    Two Rubber Wheels    Steel Ball Corners    Spring-Action Recessed Handles    Recessed Butterfly Twist-Lock Latches    Industrial-Grade Rubber Feet

• ATA-300-style flight case with wheels
• Built-in rack accommodates 1 RU of rackmount equipment
• Designed to hold one Pioneer DJ DDJ-800 2-channel rekordbox dj controller
• Additional space for cables and accessories in the back and bottom of the case
• Removable front panel allows convenient access to the 1 RU rackspace and your DDJ-800's front-panel jacks
• Manufactured with the Honeycomb Digital laminated surface design for enhanced appearance and resistance to scratches
• Rugged and durable 3/8" plywood
• Easy locking fit aluminum tongue and groove
• Cable access hole with removable emblem cover
• ProX spring-action recessed handles
• ProX heavy-duty steel ball corners
• ProX industrial recessed butterfly twist-lock latches with padlock-ready design
• Two rubber wheels
• Dual anchor rivets
• Four industrial-grade rubber feet
• High-density foam interior support and casing

Related Questions and Answers

Q: 1. I have a Fuji XC 50-230 lens, what lens pouch would fit it, or this pouch can do the job?

A: It would fit I think yes but it is a fairly wide case so if you don't want it slopping around there may be a tighter fit? But yes it should fit but it will be a lil loose.

Q: 2. Will it fit the Eizo Coloredge CS2740?

A: Yes, the Tenba Transport Air Case with Wheels for Eizo 27" Display is designed to support EIZO 27" ColorEdge or Flexscan Displays along with monitor hood, keyboard, mouse, and cables.

Q: 3. Will this bag fit a Nikon Z 24-200mm lens?

A: Yes, the Ruggard Lens Case 6 x 4.5" can accommodate the Nikon NIKKOR Z 24-200mm f/4-6.3 VR Lens (B&H # NIZ24200).

Q: 4. The dimensions - is it inside or outside dimension?

A: Exterior Dimensions ø: 5.0 x H: 7.5" / ø: 12.7 x H: 19.1 cm Interior Dimensions ø: 3.5 x H: 6.0" / ø: 8.9 x H: 15.2 cm

Q: 5. which dimension, 6 or 4 1/2, is the diameter?

A: The interior diameter of the Ruggard Lens Case 6 x 4.5" (Black) is 4.5".

Q: 6. Hello...will this be capable of holding a TS-E 24 mm ii lens? Are there other options like Lenscoat lens pouch that can fit this lens?

A: This case is more than capable of holding any lens that does not exceed the specified dimensions. I amusing the 12 long version of this product for a tele zoom I purchased that did not come with a travel bag. I have had it out in the rain, and there was no damage to the contents inside. It is nicely padded and comes with handy loops and straps and velcro loops to attach to a backpack or other luggage. Based on my experience, it is my opinion that this is a good value for the $, and provides more that adequate level of protection for my investment. Just verify that the internal dimensions are larger than the lens you intend to use it for. And for further piece of mind, I wrap the narrow end of my tele zoom with a piece of bubble wrap and/or foam to keep it centered in the case. Hope this helps.

Q: 7. Will this case fit the Canon RF 28-70 f/2 with the hood?

A: Yes, the RF 28-70mm f/2 does fit the Ruggard 6 x 4.5 lens case, but it is quite snug and the lens hood does meet some resistance going in.

Q: 8. Which Ruggard Lens case is the right size for a Canon 24-70?

A: I have my 24-70mm and 2 screw on filters (in lens cases) in the lid of the 8 inch Ruggard Lens Case. This works very well for me.

Q: 9. Will this case fit the Nikon AF-S 16-35mm f4 VR lens?

A: Yes, the Ruggard Lens Case 6 x 4.5" will fit the Nikon AF-S 16-35mm f4 VR lens.

Q: 10. Will the Nikkor 24-70 mm fit in this case?

A: The original Nikon AF-S NIKKOR 24-70mm f/2.8G ED Lens would fit, though it would be a snug fit. However, the new Nikon AF-S NIKKOR 24-70mm f/2.8E ED VR Lens released last year would not be recommended for use with this case, as the above case would be too small for the newer lens.