This Bracket 1 HD2 Camera-Mounting Kit lets you attach any two full-size wireless microphone receivers to your camcorder.

Designed for handheld or tripod-mounted shooting, this rugged mount is constructed with lightweight aluminum and stainless steel hardware. It attaches to the tripod mounting hole of your camera, while allowing your tripod plate to screw to the bottom of the bracket. The adjustable foot lets the camera sit level when you set it down, with or without a tripod plate attached. This model locates the mounting surface on the right side of the camcorder, just outside your hand for great balance when shooting handheld.

This versatile camera accessory bracket can also be configured with additional shoe mounts and accessory adapters, allowing a variety of video and audio accessories to be attached simultaneously. Two quick-plate mounts with regular and large-size hook-and-loop straps are included. A 3/8” to 1/4"-20 thread tripod hole adapter is also included.

Mounts 2 Full-Size Receivers to Select Sony, Panasonic, JVC, and Canon Cameras

Canon: XF100, XF105, XF200, XF205, XF300, XF305, XF400, XF405, XF705, XH A1, and XH G1

JVC: GY-LS300

Panasonic: AG-3DA1, AG-CX350, AG-DVX100, AG-DVX200, AG-HMC150, AG-HPX170, AG-HVX200, AJ-PX230, and AJ-PX270

Sony: DCR-VX2200E, FDR-AX1, HDR-FX1, HDR-FX7, HDR-FX1000, HVR-V1U, HVR-Z1U, HVR-Z5P, HVR-Z5U, HVR-Z7P, NEX-EA50, PMW-100, PMW-150, and PMW-160

Related Questions and Answers

Q: 1. Will the shutter release work in bulb mode? Can you press the button to open the shutter, then push the button again to close the shutter or do you have to hold the button on the remote down during the whole shutter opening?

A: per documentation that came with the product:Half-press the trigger button on the Transmitter to focus the lens on the camera.Full-press the trigger button to open the shutter. Releasing the trigger button within 3 seconds, will close the shutter. If you hold the button down for more than 3 seconds, the shutter will remain open when you remove your finger from the button, and it will close only when you press the trigger again.

Q: 2. Are TTL functions retained?

A: No, this is not a TTL radio system. For that we would suggest the Phottix Odin sytem: http://bhpho.to/1ble4Hy

Q: 3. Does this have the same shutter-remote functionality as the Vello FreeWave Wireless Remote Shutter Release for Nikon w/10-Pin Connection ?

A: A 10-pin cable comes with it and it does function as a wireless remote.

Q: 4. Will this work if the camera is tethered to a laptop?

A: You can use the Vello FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Nikon BH #VEFWB24N while shooting tethered.

Q: 5. Just double checking but I assume that if I connect the receiver to my studio flash unit#1 and the transmitter to my Nikon D7200 it will fire the flash?

A: Great value considering the cost of the competition. Must use flash in manual mode, no TTL. I use it to trigger video recording of an osprey nest.

Q: 6. Will this work with a Nikon D800 and Alien Bee 400?

A: Yes, this trigger system https://bhpho.to/3yUu84o would work with the Nikon D800 and Alien Bee lights. You can use the 2.5 mm to 3.5 mm sync cord to connect the receiver to one of the lights.

Q: 7. Will this trigger the shutter on a nikon d60 which has no cable connection?

A: It needs to make a connection via a cable.

Q: 8. Can a Fusion Basic Receiver be triggered by a Fusion Pro Transmitter?

A: The Fusion Basic and Fusion Pro are two different non compatible systems.

Q: 9. will this work with a sony a6400?

A: Yes, the Vello FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Sony Multi Interface Shoe is compatible with the Sony a6400.

Q: 10. When used on a Canon T1i, will the camera set itself to manual flash so there will be no pre-flash and I can use a light meter?

A: The camera and the flash have to set to manual. By doing this you will not get a pre-flash.