This HD2 Camera-Mounting Kit from Bracket 1 lets you attach two Sony wireless microphone receivers to your camcorder.

Designed for handheld or tripod shooting, this rugged mount is constructed with lightweight aluminum and stainless-steel hardware. It attaches to the tripod mounting hole of your camera, while allowing your tripod plate to screw into the bottom of the bracket. The adjustable foot lets the camera sit level, when you set it down, with or without a tripod plate attached. This model locates the mounting surface on the right side of the camcorder, in front of your hand, and next to the lens.

This versatile camera accessory bracket can also be configured with additional shoe mounts and accessory adapters, allowing a variety of video and audio accessories to be attached simultaneously. While designed for the URX-P03, UTX-P2, or UWP Series models, the 2nd receiver can be any model that fits in a shoe mount.

One clip mount, one shoe mount, and one 3/8" to 1/4"-20 thread tripod hole adapter are included.

Mounts Two URX-P03, UTX-P2, or UWP Series Receivers to Select Canon, Sony, JVC, and Panasonic Cameras

• Canon: XF100, XF105, XF200, XF205, XF300, XF305, XF400, XF405, XF705, XH A1, and XH G1
• Panasonic: AG-3DA1, AG-CX350, AG-DVX100, AG-DVX200, AG-HMC150, AG-HPX170, AG-HVX200, AJ-PX230, and AJ-PX270
• Sony: DCR-VX2200E, FDR-AX1, HDR-FX1, HDR-FX7, HDR-FX1000, HVR-V1U, HVR-Z1U, HVR-Z5P, HVR-Z5U, HVR-Z7P, NEX-EA50, PMW-100, PMW-150, and PMW-160
• JVC: GY-LS300

Related Questions and Answers

Q: 1. Can a Fusion Basic Receiver be triggered by a Fusion Pro Transmitter?

A: The Fusion Basic and Fusion Pro are two different non compatible systems.

Q: 2. Is this unit completely compatible with the Canon T5i EOS 700? I bought a Sigma EF 610 DG Super and was disappointed to find that there are several limitations with the T5i.

A: Don't know what limitations the Sigma Unit had with the T5i but for my use as a Real Estate Photographer, The Freewave has been wonderful - There are small places that me and my camera can not be in the same room and it has worked perfectly remotely - I also have elevated my camera on a pole and taken shots using the remote trigger and again it works perfectly for me. You may have an application that is different but in my case I highly recommend it

Q: 3. When used on a Canon T1i, will the camera set itself to manual flash so there will be no pre-flash and I can use a light meter?

A: The camera and the flash have to set to manual. By doing this you will not get a pre-flash.

Q: 4. Will this work with Sony A7sii or Sony 6500?

A: Yes. Under spects data, "Overview" section, you have the answer to your question. This is a copy past of above: Sony: Alpha a58, a77 II, a99 II, a3000, a5000, a6000, a6300, a6500, a7, a7 II, a7R, a7R II, a7R III, a7S, a7S II, a9; DSC-RX1R II, RX10, RX10 II, RX10 III, RX10 IV, RX100 II, RX100 III, RX100 IV, RX100 V, HX50V, HX90V, HX300, HX400, HX400V UPC: 847628596825

Q: 5. Will this trigger the shutter on a nikon d60 which has no cable connection?

A: It needs to make a connection via a cable.

Q: 6. Does this remote work for long exposure mode?

A: Sorry Shiva, but I bought this product to a friend and I really cannot answer your question. My friend never complained though...

Q: 7. Can you adjust the intensity of the flash from the transmitter?

A: No, you cannot. The Vello FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Sony Multi Interface Shoe is a manual flash trigger; it simply sends a wireless signal to the flash to fire and has the ability to wake off-camera Sony flashes by pressing the camera's shutter button. If you need to wirelessly control the output of an off-camera Sony TTL flash using the transmitter on the camera, I would instead recommend purchasing the Godox X1T-S TTL Wireless Flash Trigger Transmitter for Sony, B&H # GOX1TS, along with the Godox X1R-S TTL Wireless Flash Trigger Receiver for Sony, B&H # GOX1RS, for your usage needs.

Q: 8. Will this work with Einstein ?

A: The Vello FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Canon BH #VEFWB24C will work with a Paul C Buff Einstein.

Q: 9. Will this work with the Nikon CoolPix P1000, please?

A: The FreeWave Fusion Basic 2.4 GHz Wireless Trigger System for Nikon will trigger an off camera flash if you use the transmitter on the p1000 and the receiver under a Nikon flash. The P1000 does not have the required shutter release port to trigger the camera remotely if you had hoped to use it that way.

Q: 10. Will this item work with the Nikon Z7ii?

A: The Vello FreeWave Fusion Basic Wireless Flash Trigger with Two Receivers Kit for Nikon Cameras, BH # VEFWB24NRK would be compatible with the Nikon Z7 II.