With its substantial output, compact form factor, and variable beam spread, the 8 x 3.7" Torpedo LED Bi-Color Focusing Flood Light from Genaray is a valuable asset in the studio but especially on location. The Torpedo includes an AC adapter for times when an AC outlet is available, but it also runs on 7.4V NP-F batteries. If more juice is needed for lengthy shoots, a D-Tap cable is included to connect a V-mount battery.

The Fresnel lens is one of the features that gives the Torpedo versatility and flexibility. Its adjustable focus offers a 75° flood output for wide coverage that can be focused down to a 15° spot for long-throw work or sharp-shadowed sunlight effects. You can also use the included barndoors to further modify the beam to selectively light areas of your subject. The fixture's light source is a 60W COB LED array that generates the equivalent of a 300W tungsten fixture. Despite its power, the Torpedo gives off negligible heat, allowing you to squeeze it into tight places or work close to the subject without being concerned about damage or discomfort. As a further precaution, the light's thermo-controlled fan kicks in when needed and extends the LED life to 50,000 hours. The fan is quiet enough for even the most sound-sensitive environments. This fixture features stepless dimming from 1 to 100% and its color is variable from 3200 to 5600K, while its CRI/TLCI rating of 95.8/98 is your assurance of superior color rendition. 

The Torpedo is ready for worldwide use, thanks to its 100-240 VAC power adapter; but it will also run on optional 7.4V NP-F or V-mount batteries when AC power is unavailable, A carry case is included for the light's storage and transport.

3 x Torpedo Bi-Color Fresnels    3 x Four-Way Barndoor Sets    3 x Reverse Leg 7.2' Light Stands    1 x Wheeled Kit Case    Fresnel Lens: 15- to 75-Degree Focusing    Color: 3200 to 5600K, CRI/TLCI: 96.5/97    Multi-Voltage AC Adapters    Optional NP-F Style Battery Power.    Optional V-Mount Battery Power

Besides defeating multiple shadows and square edges that plague other fixtures, the powerful COB LED Array outputs the equivalent of a 300W tungsten fixture.

The Fresnel lens is adjustable from a 75° flood for wide coverage to a tight 15° spot for long-throw work.

Bi-Color control and dimmable, the Torpedo's color temperature is adjustable from 3200 to 5600K with high CRI and TLCI ratings of 95.8 and 98 - indicators of superior accuracy in color rendition. The Torpedo is also conveniently and continuously dimmable from 1 to 100%.

The Torpedo is also conveniently and continuously dimmable from 1 to 100%. Whether you place the light close up or further away, you can dial in the precise brightness you need for your exposure or video.

The Torpedo is ready for worldwide use via its included 100 to 240 VAC adapter, but it will also run on optional 7.4V NP-F or V-mount batteries when AC power is unavailable.

The light's thermo-controlled fan kicks in when needed to extend the LED life to 50,000 hours. The fan is quiet enough for even the most sound-sensitive environments.

The included barndoors facilitate selective lighting while the included diffusers and color filters allow you to personalize the quality of light on the shoot. The Torpedo's mount also has an integrated umbrella channel for even more lighting options.

Related Questions and Answers

Q: 1. Is it loud? I want it for music videos, small rooms on audio studios

A: The fan is definitely noticeable in a quiet room when the light is running hot at full power. I was disappointed about this. However, the fan only kicks in at about 50% brightness, and then gradually increases rpm and noise as the light's brightness is increased.

Q: 2. Is the yoke compatible with standard 1/4" screw light stands? I'm not sure what 5/8 in stud means

A: The Torpedo will fit a standard 5/8" baby pin on a light stand. If the stand has a accessory 1/4 20 or 3/8 16 accessory it will not have an affect. If the stand is a 1/4 20 threaded mount then you will need a 5/8 baby pin stud adapter.

Q: 3. What would be the maximum distance 'throw' of this light at the 15 degree setting? Would it be strong enough for example, to increase illumination somewhat on a subject about 50 feet away (e.g. for a conference)?

A: The effective throw of this spot may be up to 15-18 feet.

Q: 4. Does this kit come with batteries?

A: This kit does not come with batteries.

Q: 5. I am not very familiar with led lights, so I was wondering what if a light gets damaged, I mean is there a way to replace the specific light source component?

A: The LED is not user replaceable. You can contact the manufacturer to see if they have an option, but in this price range its more likely that its will be more cost efficient to just acquire a new light if it dies outside of warranty.

Q: 6. does this unit works with dimming when connected to CHAUVET DJ Pro D6 Dimmer Pack?

A: This light can not be dimmed via a inline plug dimmer.

Q: 7. Why does it say WiFi on the back?

A: According to the manufacturer it was included for the possibility of future upgrades or system improvements, but as of now it does nothing.

Q: 8. Can you use a dimmer wall switch to control these?

A: it has a built in dimmer , wall dimmers might cos flicker

Q: 9. How long will this light work on battery power?

A: About 1 hour at full but can vary with the capacity of battery used.

Q: 10. Does this unit works with CHAUVET DJ Pro D6 Dimmer Pack to control the dimming?

A: This LED was not designed for dimming via a external dimmer pack.