The tan Countryman E6X Directional Earset Mic, Medium Gain with Detachable 1mm Cable and 3.5mm locking Connector for Sky Wireless Transmitters is a versatile blend of the E6 and the E6i earset that features a springy, thin earpiece and a flexible boom and is suitable for use when a few people will be using the same mic.

The E6X earset can be used on either ear for capturing audio and rejecting unwanted sound, feedback, or surrounding noise from stage monitors or nearby speakers in houses of worship, theater, and outdoor vocal and speech applications.

The low-profile, directional E6X earset virtually disappears against the skin, so performers will forget they're wearing a mic. This version offers medium gain for very loud speaking, such as in theater performances and most vocals. Additionally, the earset comes with two pattern-changeable protective caps for maximum isolation and gain before feedback. This directional E6X earset's cable terminates to a 3.5mm locking connector for direct connection to Sky UT86P wireless bodypack transmitters.

For Stage, Theater, and Broadcast TV    Fits Sky Transmitters    Headroom for Speaking and Vocals    Detachable 1mm Diameter Cable    Versatile, Flexible Boom    Includes Windscreen    2 x Protective Caps    Black and White Single Tie Cable Clips    Carrying Case

The Countryman earsets are very small, lightweight, and the least visible headworn microphones.

The E6 Flex or E6X offers a versatile blend of the E6 and the E6i. With a springy, thin earpiece and a flexible boom, the E6 Flex is secure on the ear and fast to fit without compromising true invisibility and sound.

The E6X's stainless steel boom is tough and can be bent and re-bent to fit different performers. It is highly resistant to makeup, sweat, and moisture when used with the supplied protective caps. The earset should always have a protective cap in place to keep sweat, makeup, and other foreign material out of the microphone.

The E6X earset's flexible boom is easily shaped right on the performer's face. Changeable protective caps let you shape the frequency response for different situations or to match other microphones. The directional earset protective caps adjust the pattern from cardioid to hypercardioid.

Easy adjustment keeps the mic in a comfortable position for rejecting unwanted sounds. The directional E6X earset provides more isolation and is suitable for situations where there are loud monitors, extreme feedback, or environmental noise.

The included removable, quick-swap cable detaches from the actual earset, making it completely replaceable in the event of a short or break. The replaceable cable design makes upgrading wireless microphone systems easy as they are available in a wide selection of connections to accommodate most wireless transmitters.

Related Questions and Answers

Q: 1. Will this Benro V2 3 leg work on my Benro A48F monopod? - Currently it has a rubber foot on it which came standard with original purchase.

A: Yes, just remove the rubber foot with the wrench that it is included with the monopod. To install the new base: put a small drop of blue thread lock on the the benro 3-leg base and spin it on till the blue section of the base slips on the ball, let sit for half an hour before using.

Q: 2. Is the ball joint tension-adjustable? Or is is simply a lock/unlock mechanism?

A: These legs are primarily lock/unlock.

Q: 3. Hi! Is this compatible with the Benro SystemGo GA269TB2 tripod? Thanks!

A: Yes this base can fit the monopod leg on the GA269TB2.

Q: 4. Will this fit my Sirui p-326

A: The answer will be simple. I am not familiar with your Sirui Monopod, but if you can remove the bottom leg/pad of the monopod and it has a threaded hole, then you should be able to compare it with the thread of the 3-Leg of the Benro Locking Base. That information should be available from the B&H Website.

Q: 5. The photo shows a blue centre component. What is this part made of hard plastic or aluminum?

A: The blue section is plastic, the foots are steel with a rubber insert, the red knob is machine aluminum and the ball/threaded shaft is also aluminum, the chrome rivets and pins are steel.

Q: 6. Does it work with my Oben CTM-2500 and MeFOTO WalkAbout ?

A: The Benro 3-Leg Locking Base For Monopods is not compatible with the Oben CTM-2500 nor the MeFoto WalkAbout monopods.

Q: 7. Will this works with the Manfrotto Element MII Aluminum Monopod?

A: No, the Benro 3-Leg Locking Base For Monopods cannot be mounted to the Manfrotto Element MII Aluminum Monopod (Black), BH #MAMMELMIIA5B.

Q: 8. Can I squeeze a 16" MacBook Pro?

A: There is a pocket large enough for a 16" MacBook Pro in the WANDRD PRVKE 31L Backpack v2.

Q: 9. The base with the legs folded up how wide is it? I understand the Manfroto Belt pouch is a tight fit. So i am trying to find out how wide it is. if there is any other Pouches that would hold the feet better to make removal easier. Thank you.

A: When the base is folded it's 2 5/8 ... Don't know about what pouches it will fit in .. Hope this is heplful David L.

Q: 10. Can these feet be attached to the (now discontinued) Benro carbon fiber monopod model MC96EX?

A: There are a few different versions of that old monopod you are referring to. If the monopod you have the foot can come off and the female thread is 3/8 the 3-leg locking base will fit.