Keep devices powered and protected with the CP685AVRG 685VA/390W Compact Uninterruptible Power Supply from CyberPower. Featuring a MEMA 5-15P input, this UPS provides eight total 5-15R outlets, including four with surge protection and another four outlets with both surge protection and battery backup. Furthermore, a USB Type-B and DB9 port provide interfacing options. Delivering an output of 685VA or 390W, this uninterruptible power supply is compatible with 120 VAC inputs. Keep connected computers and other equipment protected from surges, thanks to a 1030-joule energy rating.

The Simulated Sine Wave and line-interactive topology ensures utility-power performance in the event of an outage or interruption, and EMI and RFI filtering ensure clean power with reduced interference. LED indicators and audible alarms alert you of various conditions, including wiring faults and overloads. The rechargeable batteries feature an 8-hour recharging time, while the 6' power cord and keyhole mounting slots allow for easy installation. Included PowerPanel Personal software can be used for even more in-depth management of the CyberPower CP685AVRG UPS.

8 x NEMA 5-15R Outlets Total    4 x Surge & Battery Outlets    4 x Surge-Only Outlets    685VA / 390W Output    120V Input    8-Hour Recharge Time    1030 Joules of Energy Protection    USB & Serial Communication Ports    Simulated Sine Wave    6' Power Cord with NEMA 5-15P Plug

Supplies power long enough for equipment to properly shut down when utility power fails. Helps prevent loss of data and minimizes the component stress caused by a hard shutdown.

Diverts excess voltage away from sensitive electronic equipment during an AC power surge or power spike to prevent damage.

Exists when a line interactive UPS has an autotransformer that regulates low voltages and over voltages without having to switch to battery.

Automatic Voltage Regulation or AVR provides clean, consistent AC power by automatically increasing or boosting low voltage without using battery power when incoming utility power experiences minor fluctuations.

Uses pulse wave modulation to generate a stepped, approximated sine wave to supply cost-effective battery backup power for equipment that does not require sine wave output.

A patented design allows utility power to bypass the UPS transformer when AC power is stable, which reduces energy consumption, noise, and heat buildup.

Minimizes noise during operation for a quieter work environment.

Widely spaced outlets accommodate transformer-based plugs without compromising access to other outlets.

Provides a user-friendly dashboard interface for controlling and monitoring the UPS.

This model is an ENERGY STAR certified Uninterruptible Power Supply system. ENERGY STAR is the trusted, government-backed symbol for energy-efficient products and practices that help save money and protect the environment.

Related Questions and Answers

Q: 1. I want to connect my hdmi monitor to an ursa that only has sdi connections, is there a holder that can be bought to mount?

A: There is no mount for the Blackmagic Design Micro Converters, but most often people are using Velcro or a clamp. Also, make sure you get the SDI to HDMI 12G converter. This one is going in the opposite direction for what you need.

Q: 2. Can I use this to link my Sony a7iv hdmi output to my Small hd focus SDI. Thanks in advance

A: With the HDMI output on the Sony A7IV and feeding into a SDI input on the SmallHD focus, it would be optimal to look towards this model: Blackmagic Design Micro Converter HDMI to SDI 3G BH #BLCVCMICHS03 • MFR #CONVCMIC/HS03G. https://bhpho.to/3HiBenM

Q: 3. Will this work with the Ninja V using Hollyland Cosmo C1 to Sumo 19 SE Monitor?

A: It would be possible to use the Blackmagic Design Micro Converter HDMI to SDI 3G (with Power Supply) to take an HDMI signal from a Atomos Ninja V to input into the Hollyland Cosmo C1 However, the Hollyland Cosmo C1 can cross convert HDMI signals from the transmitter to output via SDI on the receiver.

Q: 4. What distance can this converter support 2160p@60hz max?

A: When using Canare L-5.5CUHD 12G-SDI UHD Coaxial Cable a 12G 2160p@60hz would transmit 100ft. Canare 12G-SDI UHD 4K Single-Channel BNC Cable (100') BH #CAL55CUHD100

Q: 5. Can this be used to take an output feed from a switcher to a monitor ?

A: yes

Q: 6. Does this device work to boost the signal of the SDI signal?

A: The Blackmagic Design Micro Converter Bidirectional SDI/HDMI 3G does not boost the signal of the SDI.

Q: 7. Can this be used as a graphics overlay insertion tool for key and fill?

A: The Blackmagic Design Micro Converter HDMI to SDI 3G cannot be used as a graphics overlay insertion tool for key and fill.

Q: 8. Is there a difference in performance between the regular or bidirectional micro converter in terms of latency?

A: The Blackmagic Design Micro Converter Bi-Directional SDI/HDMI 3G and the other Mini Converters have very little to no latency. They would both perform the same.

Q: 9. Can i use both outputs (SDI & HDMI) at the same time with 1 input?

A: Yes, the Blackmagic Design Micro Converter BiDirectional SDI/HDMI 12G with Power Supply is capable of sending an SDI and HDMI signal at the same time with one input.

Q: 10. Using the Black Magic ATEM TV Studio HD and the Pocket Cinemas, do I need 2 of these for camera control or just 1? Also, do I need to come into the switcher as HDMI or SDI for camera control?

A: You only need 1 converter per camera. You can use the HDMI or SDI inputs on the Blackmagic ATEM TV Studio HD for Blackmagic Camera Control.