With the magnifying power to see a distant target clearly and an MOA-based reticle with numerous hold marks and ranging capability, Trijicon 6-24x50 Tenmile HX Riflescope will give you confidence to take that long shot. The large objective lens and broadband fully multi-coated elements ensure a bright sight picture with sharp detail and accurate colors. This 30mm scope is constructed from 6061-T6 aluminum, with capped finger-operated turrets that adjust impact point at 1/4 MOA per click and a total of 70 MOA of elevation and windage adjustment. Situated in the second focal plane, the MOA Ranging reticle uses black crosshairs with hash marks for estimating distance and showing holds, with a small red illuminated center dot. Ten brightness settings suit any light condition, with off settings in-between to save time. Differing shooting styles and positions are accommodated by the repositionable throw lever on the magnification ring.

Illuminated Reticle, 2nd Focal Plane    Fully Multi-Coated Optics    1/4 MOA/Click, 70 MOA Total Travel    Capped Turrets    30mm Maintube    6061 Aluminum Housing    Repositionable Magnification Lever

• 6-24x magnification
• Fully broadband multi-coated optics
• 50mm objective diameter delivers bright images in low light
• 19-4.7' field of view at 100 yards
• 3.1-3.8" eye relief

• Second focal plane
• Black T-shape with 1 MOA marks for ranging and holds
• Illuminated red center dot
• Ten brightness levels with off setting in-between
• Powered by one CR2032 battery

• 1/4 MOA impact point correction
• 70 MOA elevation and windage adjustment ranges
• Capped finger-operated turrets
• Repositionable magnification throw lever

• 6061 aluminum housing
• Waterproof, submersible to 10'
• Nitrogen purged for fog-free performance
• 30mm maintube
• Black anti-glare finish
• Side focus parallax knob, 10 yards to infinity

Related Questions and Answers

Q: 1. How many hours of use does this monitor have? Do you offer any sort of warranty on this item? Best-

A: While there is no specific spec for life span of the Sony BVM-HX310 31" 4K HDR TRIMASTER HX Professional Master Monitor, we believe that it will last 50,000 hours or 5 years of active use. The Sony BVM-HX310 31" 4K HDR TRIMASTER HX Professional Master Monitor does included a Limited 1-Year Warranty offered by Sony, and if you are looking for extra protection, we do sell Allstate protection plans for the monitor as well. See: https://www.bhphotovideo.com/find/shared/warranty-allstate.jsp?origSearch=allstate

Q: 2. What is the ASA?

A: 100

Q: 3. Will this convert a 1080p signal from a BMPC4K to 1080i?

A: You're using this for an Output Converter. Yes. We use these for Input Converters from HDMI 1080 Cameras & PCs to Blackmagic Design ATEM 2 M/E Production Studio 4K. Solid performance. We found the software makes them easier to configure quicker than using the on screen display. The on screen display is great for verification of signal In & Out.

Q: 4. Does this include a mounting plate to attach it to a rack?

A: It includes a mounting plate to attach it to a surface, but you would need to get a rack compatible surface to which you would attach the mounting plate.

Q: 5. Does this converter give clean results when converting from 1080p 60fps to 1080p 30fps? Any visible jittering or lag?

A: Its super clean

Q: 6. I'm trying to reduce or eliminate the shadow caused by those wearing baseball-type hats outdoors. Can this be used as a fill-flash at 15 feet?

A: This would depend on the angle of the shot. You can eliminate that shadow with any flash as long as you use a low angle. Keep in mind this flash is aimed toward macro photography. It is not very powerful for long distance. I have not tried its threshold, but I would not use it more than 6 feet. To eliminate the hat shadow you can also use a white reflector from a low angle with any flash if there is some environmental light. Try that before purchasing anything you might regret.

Q: 7. Is this film orthochromatic or panchromatic?

A: The film is orthochromatic.

Q: 8. will this unit upconvert 1024x768 to 720 and 1080 video formats?

A: Yes. It takes whatever input it sees and allows you to decide the output resolution with frame rate i.e on a Mac, taking 60hz and outputting 59.94.

Q: 9. it can convert 1080p to 1080i?

A: Yes! Can even Convert 4K to 1080. We tried it! Pretty slick Device!

Q: 10. We have all 4 SDI inputs occupied in our ATEM Production Studio 4K. Does this unit have problem converting HDMI coming from an matrix to HDMI input in the ATEM? Right now I can't get signal straight from the matrix even when setting the input in the matrix to the ATEM's configuration 576i@50 or 1080i@50 or 59.94I noticed all comments use this for converting to HD-SDI before the switcher; would there be problems going HDMI to HDMI scalled to an BM ATEM Prodution Studio 4K? Thank you!

A: I have not had a problem scaling anything from hdmi or hd-Sdi to either with these boxes. I have 20 of them. I have however had input issues with BM hardware and often have to try multiple versions of firmware for various option to work. Are you saying your matrix to decimator isnt showing up as an input in the MD-HX? Does it work going direct out to a monitor? Does the monitor give you the connection details?