The 10' orange 4505R 12G-SDI/4K UHD Single Link BNC Cable from Laird Digital Cinema breaks the 12 GHz 4K UHD coax barrier. This RG59 BNC cable is designed to handle 12 GHz 4K UHD signals up to 208' (3G-SDI up to 433') and provides a link between your switchers, cameras, and other 4K video gear. Handcrafted assemblies, featuring a 4505R 4K UHD coaxial cable for 12G-SDI, make this cable a simple choice when setting up your studio backbone and infrastructure. Why run dual link and quad link cables when one will do the job? This BNC cable is ready to meet today's high-bandwidth 12G-SDI signal and data serial interface requirements. The 4505 Series is the 12G-SDI equivalent of Belden's 1505 cable. It features a silver-plated copper center conductor and a cable diameter of less than 0.25", making it the ideal choice for low-profile cable runs.

75 Ohms, 20 AWG RG59 Coaxial SDI Cable    BNC Male Connectors    PVC Jacket    Carries 12G 4K Signals up to 208'

Designed for UHD and 4K video transport

12 GHz, 4K UHD precision 75-ohm video cable

Single-link BNC simplifies installations

Optimized transmission distance for UHD TV

Transmits 4K up to 200'

Return loss is guaranteed at -15 dB RL from 4.5 to 12 GHz

Meets SMPTE 424M, ST2081-1, and ST2082-1 Standards

Sweep tested 5 MHz to 12 GHz

Related Questions and Answers

Q: 1. Can I offload encoding to this card in Final Cut Pro?

A: The Blackmagic Design DeckLink 4K Extreme 12G Capture & Playback Card does not do encoding.

Q: 2. What is a suitable 12G fiber to 12G SDI converter to pair with this cards optical connections?

A: Here is the converter we suggest: Blackmagic Design Teranex Mini Optical to HDMI 12G Converter (Optical Fiber Module Not Included) B&H # BLTERMOHDMI. Here is a selection of SFP modules. https://bhpho.to/2kYu6EM

Q: 3. Can this scale an HDMI in to HDMI out? (With no SDI connections) We need to go from 1080p60 HDMI to 2160p29.97 HDMI.

A: The Decimator 12G-CROSS 4K HDMI/SDI Cross Converter with Scaling and Frame Rate Conversion, is able to convert any SMPTE formats from HDMI to HDMI or SDI output, and can convert an input of 1080p60 through HDMI to an output of 2160p29.97 HDMI.

Q: 4. How long is the breakout cable?

A: The breakout cable is 12".

Q: 5. Does this camera capture the full rec. 2020 color gamut like the Sony F55, or does it have a smaller color gamut like the Sony F5/FS7?

A: The VariCam LT is equipped with V-Gamut, which encompasses the entire BT.2020 color space

Q: 6. Will this converter pass HDCP content through to SDI?

A: No, the DECIMATOR 12G-CROSS 4K HDMI/SDI Cross Converter with Scaling and Frame Rate Conversion will not pass HDCP content through it.

Q: 7. The varicam lt can provide hdr output monitor?

A: Yes, new LT models have HDR support.

Q: 8. On the Blackmagic website it says this card supports 4:4:4 over HDMI, but the spec sheet on B&H says it only supports 4:2:0 over HDMI. Which is it?

A: HDMI can be 4:4:4, 4:2:2, or 4:2:0 based on modes of operation.

Q: 9. Is there an aperture priority mode?

A: Unfortunately, this camera lacks an aperture priority mode.

Q: 10. I see the spec's say DCI 4K(4096 x 2160) but does it do UHD 4K (3840 x 2160) ?

A: Hi Mike, This is Jules from product support at Symbiosis, Decimator's master distributor for the US. The 12G-Cross supports all SMPTE formats up to and including 4K (4096) 60p. This includes all SMPTE compliant UHD formats of 3840x2169 up to 60p. It also supports a range of VESA formats. I hope this helps. Kind Regards Jules