With its ultrathin design, the gloss black Peerless-AV Hospitality Articulating Wall Mount is designed exclusively for ultraslim TVs up to 3" deep. The HA747PU is built to hold TVs firmly in any position while still offering an ultralow profile. An I-shaped adapter plate makes it easy to access the back of the TV, keeping hardware hidden. Internal cable management provides a clean professional installation that transitions the cables smoothly from the wall to the TV. With a sleek gloss black finish, the HA747PU is the ideal mounting solution for any hospitality application.

ript>

Supports Displays up to 60 lb    200 x 100mm to 400 x 400mm VESA Support    Provides ±60° Lateral Swivel Adjustments    Arm Extends 2.68 to 25.63" from the Wall

• Low-profile design creates an aesthetically appealing look
• Mounts to wood stud, concrete, cinder block, or breeze block
• Integrated cable management protects, contains, and conceals cables for a clean professional installation
• Arm retracts to 2.68" and extends up to 25.63" from the wall
• Up to ±90° of side-to-side swivel
• The I-shaped adapter plate's innovative design helps avoid blocking connections on the back of your display
• Designed for use with TVs that are less than 3" deep
• Scratch-resistant fused epoxy finish

Related Questions and Answers

Q: 1. Can you add Thunderbolt 3/4 to this enclosure?

A: No, the TVS-h874-i9 does not support Thunderbolt expansion.

Q: 2. Does the i9 or i7 Model of the 874, utilize an upgraded heatsink or use the T variant of the CPU?

A: QNAP has not provided any information on difference in heatsinks between variants of the TVS-h874X. All variants have the same operational temperature range.

Q: 3. Which QNAP bay expansion enclosure is this compatible with?

A: I would recommend the TR-004 (BH #QNTR004US) or TR-002 (B&H # QNTR002US) as expansion options for the QNAP TVS-472XT.

Q: 4. With one expansion slot used for the Thunderbolt 3 ports, how can I get 2 NVMe M2 2280 SSDs for Q-tiered storage? Do I need to remove the TB3 ports?

A: There is no need to remove the thunderbolt 3 expansion card.

Q: 5. Can I connect one edit system via T3 and another edit system (located in a different room) via 10gbps ethernet and have them both editing at the same time? I assume the second ethernet port could then be hooked up to my router/modem?

A: This system uses RJ45. It does not have any FIber ports for a T3 connection. The enclosure can support 10GbE connections.

Q: 6. Can you connect this device to your main computer using TB3 and still have a remote computer access the drives through the Internet ports?

A: This NAS server also acts as a DAS (direct attached storage) when connected to the Thunderbolt 3 port. You will connect this NAS server to your network via the Ethernet port, to connect remotely with it. When you're next to your NAS server, you can connect to it via the Thunderbolt 3 port for a faster transfer rate.

Q: 7. I already have a raid drive can I transfer my existing drives to the enclosure without formatting the drives?

A: RAIDs cannot be swapped to other types of hardware without loosing data.

Q: 8. Beginner question, can I use this with one 10gbe cable between a Thunderbolt dock and the NAS?

A: The QNAP TVS-h874X 8-Bay NAS Enclosure BH #QNTV874XI964 needs to be connected to a network switch or router.

Q: 9. If I install 7 22TB drives and use Raid 5, what minimum size should the 8th (parity) drive be?

A: With the QNAP TVS-h874T 8-Bay NAS Enclosure in a RAID 5 configuration, all drives should be the same capacity.

Q: 10. Is one of PCI slots occupied on the QNAP TVS-H874X-I9-64G or are both free?

A: Both M.2 slots in the QNAP TVS-h874X 8-Bay NAS Enclosure BH #QNTV874XI964 are available.