Designed to provide protection to home and office computers, electronics, home theater equipment, and more, the CSP606U42A 6-Outlet Professional Surge Protector from CyberPower helps prevent damaging spikes in energy that are caused by storms and electrical power from reaching your equipment. It also provides convenience for devices that are situated where wall receptacles are out of reach. This unit has 6 NEMA 5-15R outlets, a standard NEMA 5-15P input connection with a 6' cord, and two USB Type-A ports that share a total of 5V / 4.2A for quickly charging mobile devices. Other specs include an input voltage of 125V, a 15A circuit breaker, and a surge energy rating of 900 joules. Protection is provided by a limited lifetime warranty, and connected equipment that is damaged while the SurgeArrest is active will be covered up to $75,000.

6 x NEMA 5-15R Outlets    1 x NEMA 5-15P Input Connection    2 x USB Type-A Ports (5V / 4.2A Shared)    Input Voltage: 125V    15A Circuit Breaker    900 Joule Surge Energy Rating    45° Right-Angle Plug    $75,000 Equipment Protection Policy    6' Cord Length

Power is cut to connected equipment when the unit can no longer provide surge protection.

Alerts you when surge protection is active.

Accommodates wide-spaced plugs without compromising the access of other outlets.

Two USB Type-A ports output a total of 4.2A to quickly charge mobiles devices.

A flat, wall-hugging angled plug helps with tight outlet locations.

CyberPower will repair or replace properly connected equipment if it is damaged by a power surge.

Covers defects in materials and workmanship in the product under normal use and conditions.

Related Questions and Answers

Q: 1. Will this kit work with a Samsung galaxy s10 phone?

A: Yes, the Rode Vlogger Kit USB-C is compatible for use with a Samsung Galaxy S10 smartphone.

Q: 2. Is the 500DR compatible with sb800 Nikon flash ?

A: With the right cable you can connect it to the Nikon SB-800 flash.

Q: 3. Hi I buy this item from B&H ,it’s not work when low battery power (AA battery) in flash ,do you can dissolve this problem ?

A: There must be fresh AA batteries in the flash in order for the pack to work properly.

Q: 4. Wil this save SPL levels over time and if so, can I export that data to produce a graph? I am trying to record levels of an entire church service.

A: From the product website: "The PAA3X also features a "screen capture" function allowing users to save images of the screen to an SD card in BMP format for later reference." https://www.phonic.com/index.php/en/product/106-paa3x

Q: 5. Does this Take a full second to recycle or is that the max time? The Nissin ps8 claims half the time

A: This battery would offer a recycling time up to 1 second.

Q: 6. Is there a power cable to connect to a Godox TT685S TTL flash?

A: Yes, you need the Bolt power cable, click on the link below to view; https://bhpho.to/2NFJGUl

Q: 7. Does the "Battery pack only" version of the product come with a battery? Or do I need to purchase the $200+ Version? In other words, does the $120 version provide power or do I need to get the batteries separate.

A: The Bolt PP-500DR Dual-Outlet Power Pack with Removable Battery includes one battery. The Bolt PP-500DR Dual-Outlet Power Pack with Two PP-5800BP Removable Batteries and PP-MCX Mounting Clamp Kit includes two batteries.

Q: 8. I have yongnuo 600 ex-rt II strobes. I purchased the bolt pp-500 and the canon cz2 HV cable on at BH. There is no difference in refresh between standard AA batteries and the Bolt pp-500...The flash doesn't fire when I set it to "other power source" and connect the the Bolt pp-500. Any suggestions?

A: According to Yongnuo, there is no specific setting in the Yongnuo Speedlite YN600EX-RT II for Canon Cameras to specify external battery usage. I would recommend to first ensure you do have four (4) AA batteries inside the flash as well as the external battery. Also, ensure the power cable is fully inserted in both the battery pack and into the flash. Then you may turn on your Bolt PP-500DR battery pack, then turn on the Yongnuo Speedlite YN600EX-RT II. The recycle time should be reduced, but it will be most noticeable when the flash is set to full power or when shooting multiple shots in a row (compared to using the flash without the external battery pack). If you do not notice a decrease in recycle time, and if the battery pack was purchased within the last 30 days, you may contact our Customer Service Department to return the battery pack for an exchange or a refund. If it has been over 30 days since you purchased the battery pack, you may contact Bolt Flash directly for assistance either by e-mailing them at info@boltflashes.com or by calling them at (212) 594-2120. If you have used multiple battery packs and none seem to decrease recycle time speed, then it may be possible the high voltage port on your flash is defective and may need repair.

Q: 9. Does this work with a Cfast 2.0 card

A: The Lexar Professional Multi-Card 3-in-1 USB 3.0 Reader is only compatible with SDXC, microSDXC, and CompactFlash Type I memory cards--it isn't compatible with CFast memory cards.

Q: 10. Is it compatible with Canon 600RT?

A: Yes, it is compatible with the Canon 600EX.