The 49 to 82mm Kase Magnetic Step-Up Ring allows you to attach 82mm magnetic Kase Wolverine filters to lenses with a 49mm filter thread. The step-up ring is made of steel and screws onto the front filter thread of your lens. Your magnetic Wolverine filters can then be easily snapped on and off. Kase Wolverine magnetic step-up rings are compatible with both the Wolverine and Revolution lines of filters.

Screws onto 49 Lens Filter Threads; Accepts 82 Wolverine Magnetic Filters

Related Questions and Answers

Q: 1. Which version of the 3k should I buy to mount the GODOX 860 speedliight, and what accessory do I need to mount that flash to this gorillapod

A: I'd go with B&H # JOJB01507 because it has a small ball head for easy control of flash positioning. All you need to get your flash on there is B&H # VECS

Q: 2. Can I use the BH-30 Ball Head with this? Or do I have to buy an adapter?

A: Yes you can right out of the box. The Really Right Stuff BH-30 head has a 3/8"-16 thread for attachment to a tripod. This GorillaPod includes the needed 3/8"-16 bushing out of the box.

Q: 3. Is there a mount that I can buy to use my phone while using this gorilla pod?i am looking for the tripod that I can use my fujifilm xt2 and at the same time I can also use the tripod if I want to use my iPhone??? Thanks...

A: I would assume this would work. https://a href= http://www.bhphotovideo.com/c/product/1250982-REG/reticam_rc_stm01_c_smartphone_tripod_mount_with.html target= _blank www.bhphotovideo.com/c/product/1250982-REG/reticam_rc_stm01_c_smartphone_tripod_mount_with.html/a

Q: 4. Can this tripod hold the weight of a Panasonic GH4?

A: 100%. I use it for my d7000 with a really heavy lens a lot. I think a GH4 would be no problem at all.

Q: 5. Ordered and rec'd this tripod recently and it will likely work out well for me. I'm wondering about using it at the beach. Would you have an idea IF the sand would get into the joints of the legs and end up being imbedded and 'gritty'? Thanks

A: Yes. sand will get in the joints but the joints come apart. Nothing a quick rinse and wash cant fix.

Q: 6. Does it come with mobile support? samsung galaxy s9 plus

A: No, you will need to purchase a separate phone adapter.

Q: 7. Can I put a small Leitz ballhead on this and still tilt vertically?

A: Yes, you can put a Leitz ball head on this, just make sure the head has a 1/4-20" female thread on the bottom and if not you will need to get a reducing bushing if it is 3/8." Make sure you don't exceed 6 lbs with the head and camera. Using the head vertically on this pod is not advisable, it will most likely be too top heavy and fall over.

Q: 8. will it work with an Olympus OMD EM1II?

A: The JOBY GorillaPod 3K Flexible Mini-Tripod with Ball Head Kit is rated to support more than 6 pounds. Most of the time an Olympus camera and pro level lens would weigh 3-4 pounds.

Q: 9. Looking to buy a first hiking tripod (budget 100$ or less), and trying to understand : would this be a better buy if winds are a problem? (I am assuming that I won't have a problem to find suitable sites to place/attach this tripod). Would I be better off with this than full- or medium-sized tripods at 100$ or less. I use a compact fixed lens mirrorless camera, so weight of camera is not an issue. Thanks

A: Wind would not be a problem with the Joby Gorilla Pod because even if you could not attach it to anything, it would be quite low to the ground so wind could not easily get underneath the tripod or camera.

Q: 10. Can the 3k comfortably and easily carry a D750 with the 105mm micro lens? I know it’s listed at 6.6 lb and this setup should be under 4lb but want to make sure it will be an easy task

A: On paper, it will hold your setup but I still think you would be better served going 1 size up with the 5K. Any little pressure on the 3k legs may move them. Click the link below to view the 5K; https://bhpho.to/2OEL9uR