You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Sirui 3t-35k Table Top Tripod (black) And Xuma Smartphone Mount Kit

Sirui 3t-35k Table Top Tripod (black) And Xuma Smartphone Mount Kit
  • Product Code: ga195961
  • Availability: In Stock

$164.97 $235.91

The black Sirui 3T-35K Table Top Tripod is a versatile camera support that can also be used as a handheld pole for video shots, selfies, or low- or high-angle shots. It can hold up to 8.8 lb, weighs just 15.2 oz, and reaches 13.4" with its two-section column fully extended. With the column removed and the head installed directly to the legs the tripod has a minimum height of just 4.5".

The ball head has an Arca-type compatible clamp and quick-release plate, and a 90° notch for shooting in portrait mode. The legs of the tripod fold down for extended reach when using it as a selfie pole, or fold up to give you a solid grip to handhold the pole when shooting stills or video. An included carabiner allows you to attach the tripod to a loop for easy transport.

Load Capacity: 8.8 lb    Maximum Height: 13.4"    Minimum Height: 4.5"    Folded Length: 9.5"    Mount Fits Devices 2.4 to 3.25" Wide    3 x 1/4"-20 Threaded Tripod Holes    Spring-Loaded Bracket    Rubber Coating Protects Finish

Key Specs
Camera Mounting Screw1x 1/4"-20 Male
Head TypeBall Head
Drag ControlNo
Primary MaterialAluminum
Load Capacity8.8 lb / 4 kg
Maximum Working Height13.4" / 34.1 cm
Closed Length9.5" / 24.1 cm
Weight15.2 oz / 430 g
Parameters
Camera PlateQuick Release: Arca-Type
Head
Head TypeBall Head
Base MountFlat Base with 3/8"-16 Female
Pan & Tilt
Drag ControlNo
Independent Pan LockNo
Legs
Primary MaterialAluminum
General
Load Capacity8.8 lb / 4 kg
Maximum Working Height13.4" / 34.1 cm
Minimum Working Height4.5" / 11.4 cm
Closed Length9.5" / 24.1 cm
Weight15.2 oz / 430 g
Packaging Info
Package Weight1.36 lb
Box Dimensions (LxWxH)11.25 x 4.35 x 2.5"

Related Questions and Answers

Q: 1. Does anyone know if this tripod will support a Nikon D-7100 with an 85mm macro lens with extension tube for micro shots?

A: It can support the D7100 with an 85mm macro lens and extension tubes but it will not balance it if you take your hands off the camera. I would only recommend that tripod as a stabilizing devise, I would not recommend it for hands free shooting.

Q: 2. What is the load capacity of this tripod?

A: 2.5 lbs is the stated load capacity, but you can easily mount 3 lbs.

Q: 3. Is that a 1/4 thread on the bottom?

A: yes

Q: 4. is the screw in the base also 1/4-20? I may want to attach a spotting scope to the base and not use the ball head. The scope is threaded for 1/4-20

A: It is 1/4-20, and it has a 3/8 thread adapter on it to fit the ball head.

Q: 5. Can the head be changed to one I use from a larger tripod?

A: Yes. I changed the head for a larger one and also fitted a macro rail.

Q: 6. can this fit the Samsung note 20 ultra.?

A: Yes, the RetiCAM Smartphone Tripod Mount with XL Conversion Kit BH #RECSTM01C can fit a Samsung Note 20 Ultra.

Q: 7. Does this tripod come with a padded tripod bag? Thanks SOOOOO much!!

A: The Sirui W-2004K20 Ocean Runner Tripod Kit includes a padded case.

Q: 8. leg dimensions? (what's the footprint)

A: The base of the tripod forms an equilateral triangle approximately 8 3/4 per side in it's most compact state. If you extend the legs, the base increases to 10 1/2 per side.

Q: 9. I have a Nikon D750 along with the following lenses - Nikon 24-120mm F4, Nikon 70-300mm F4.5/5.6, Nikon 85mm F1.8G, Nikon 50mm 1.8G, and a Nikon 20mm F1.8. I'm sure they'll be no issues with the primes. Any issues using this tripod with either of the zoom lenses?

A: You may have problems with the zooms, as the Mini Pro III is only rated to hold up to 2.75 lbs.

Q: 10. Hi, The ballhead can it be remove for change. Can i change it for a another one like the SBH-250DQ Aluminum Ballhead instead of SBH-100DQ ? Can i buy this kit mini tripod table-top and an another ballhead ? More robust the the 100DQ.

A: The head does come off on that tripod.It is a thread so if you do put a different head on it, you might need a tripod bushing.General Brand Tripod Reducer Bushing 3/8 to 1/4 -20B&H # GBRB Mfr # NPTRBhttp://bhpho.to/1avkNxl

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Chimera Aluminum Pole (34.25")

$51.66 $66.12

Products You May Like

Astera Power/data Combination Cable (5')

$70.20 $110.92

Nightstick Nsp-4606b Dual-beam Headlamp

$72.21 $97.48

Alogic 100w Usb-c Pd Gan Ac Charger

$299.97 $437.96

Broncolor Mini Flamingo Wheeled Boom Stand (8.5')

$9,668.85 $12,279.44

Cinemilled Magnetic Nail-on Mount Plate

$179.97 $226.76

Hoya Portrait Glass Filter (58 Mm)

$134.85 $194.18

Sigma 14mm F/1.8 Dg Hsm Art Lens For Leica L

$4,797.00 $6,811.74