The black, 14 RU over 16 RU Odyssey Innovative Designs Pro Combo Rack Case is a professional-grade case with a glide-style laptop platform, integrated side table, and heavy-duty casters, making it great for pro-audio event production. The case is made of ABS plastic laminate over 3/8" plywood and designed to protect and transport an audio mixer, controller, amplifiers, and rack gear. The angled top helps to provide easy access to controls, while the 16 rack spaces below house and protect your precious amplifiers and signal processors.

The front and rear panels are completely removable and the rear panel doubles as a side table with an integrated table leg that mounts to either side of the rack. The case has steel hardware and chrome-plated butterfly latches. It is transported by recessed, spring-loaded handles, and a caster board with four 3.5" heavy-duty casters, two of which are locking. The heavy-duty steel ball corners and aluminum edging ensure the case will last a lifetime.

For Mixers and Controllers    ABS Laminate over 3/8" Plywood    Glide Style Laptop Platform    Front and Back Removable Covers    Rear Cover Doubles as Side Table    Slanted Top Rack for Easy Control Access    Chrome-Plated Butterfly Latches    Recessed, Spring-Loaded Handles    Caster Board with Four Wheels    Steel Corners and Aluminum Edging

• Top slanted rack: 14 spaces
• Top slanted rail has a 4" height difference front to back
• Bottom vertical rack: 16 spaces
• Top slanted rail to the top of the bottom vertical rail is 3.75" at the front and 7.75" at the back
• Front to rear rail to rail measures 21"
• Rail to front or rear cover is 22"
• 3/8" ply construction
• Patented top glide-style platform
• Clearance from slanted rail to glide platform is 2.75"
• Case top cover interior is 9" with a 2.5" clearance from the glide platform's highest point (when cover is attached)
• Removable front and rear doors
• Rear cover depth is 3" (not including the table leg)
• Front cover is 29"H with a 2.75" interior depth
• Rear door converts into a side table mounted on either side of the rack
• Table surface is 22.5 x 44.75"
• Side table mount weight capacity is 100 lb evenly distributed
• Table when mounted is 30" H with 26.5" H bottom clearance
• 3.5" door lids (3" interior depth)
• 3.5" caster wheels, 2 with brakes (caster assembly is required)
• Recessed handles and latches
• Front and rear rack rails
• Limited lifetime warranty

Related Questions and Answers

Q: 1. What is difference between this and OH 100? What is distance between legs and what is height?

A: The Glide Gear OH 200 will provide a maximum height of 36inches, width of 34.5inches, maximum payload of 5lbs and will not require C-stands. The Glide Gear OH 100 has a maximum height of 27inches, width of 34inches, the maximum 10lb payload and will not require c stand.

Q: 2. Does it have a mount to support an ipad ?

A: You may use a mount such as the Ulanzi U-Pad Tablet Tripod Mount Adapter, BH # ULUPIH to support an iPad on the Glide Gear OH 100. https://bhpho.to/2ZKRgmQ

Q: 3. Does it come with the pipes or I should buy them separately?

A: Speedrail is not included

Q: 4. Does it include a phone holder ?

A: No, the Glide Gear OH 100 Adjustable Overhead Camera Platform does not include a phone adapter. You would have to purchase one separately. If you need a recommendation, the Sunwayfoto Smartphone Bracket for 2.2 to 3.6" Phone, B&H # SUCPC01, would be a well-built item that also allows you to adjust the angle/position of the smartphone on the overhead camera platform.

Q: 5. Does this have to be surface mounted or does it just sit atop the desk?

A: It sits atop a flat surface pretty well, I've never had a need to secure it and I use it with my fairly heavy Canon 70D and kit lens. It does have holes though, so you could screw it down or even a c-clamp would hold it if needed.

Q: 6. what is the mount attached under the platform in the photo description? Do you carry the part?

A: The Arca-Swiss mount on the bottom of the Oben TLSP-1614 Tripod and Light Stand Platform (16 x 14") is built into the platform and is not available separately.

Q: 7. Can someone recommend stands for this? I bought 2 Matthews Maxi Kit Steel Stands, but the stud on top does not extended far enough for the lock on this.

A: Try using a baby stand extension so that the stud on top can extend far enough for the lock.

Q: 8. Does the item include the Camera Mount or is that sold separately ?

A: This item does include a 1/4-20 camera screw.

Q: 9. Does this monitor have a VESA mount? We want to install it on a wall.

A: Yes, the Samsung Odyssey G3 LF24G35TFWNXZA 24" 16:9 144 Hz VA Gaming Monitor does support a 100mm x 100mm VESA mount pattern.

Q: 10. How can one enter focal length above 100mm?

A: The DJI Focus Pro All-In-One Combo is not compatible with lens focal lengths above 100mm due to the DJI Focus Pro LiDAR requiring a calibration range at 1 meter or 3.28 ft.