The Wireless Prime 500S Wireless HDMI Video Transmitter from CINEGEARS transmits a video signal up to 800' with <70 ms latency to an optional Prime 500S receiver or smart device such as a smartphone or tablet via the free 5 GHz wireless frequency. It features an HDMI input and output, and it supports input and transmission of resolutions up to 1080p60. The compact, lightweight transmitter comes with an L-series battery plate attached, or it can be powered using a separately available power adapter.

Wireless Video Transmission up to 800'    Transmits up to 1080p60 Video    HDMI Input and Output    L-Series Battery Plate    Transmits to Receiver or Smart Device    Supports up to 4 x Smart Devices

Related Questions and Answers

Q: 1. How can I power these with an anton bauer d-tap / p-tap cable?

A: Sorry, but CINEGEARS does not provide a battery powered option. If you were to make your own, be on notice the Anton Bauer batteries have too much voltage and you would need to regulate the voltage to the CINEGEARS equipment.

Q: 2. Exactly what is included in this $598 kit?

A: Listed as in the box with the CINEGEARS Wireless Prime HDMI 4K Kit (Encrypted) is the following: Transmitter Wireless Prime HDMI 4K Receiver (Encrypted) 4 x Long Distance Antenna 2 x Power Supply IR Transmitter / Receiver Set Limited 3-Year Warranty

Q: 3. This unit is compatible with cameras blackmagic 2.5k, 4K, Ursa, Ursa mini, Sony FS7, FS5, FS700, EX3, and all RED ???Do you have any feedback on the reliability of this product?

A: Since this unit has both SDI and HDMI inputs and can read all common FPS rates, we are of the opinion that this should work with all of the cameras you mentioned. No feedback here yet as to reliability.

Q: 4. I operate in Africa, where 99% of the walls are concrete/mason type walls. Within a short range, say 20 meters, will the signal punch through the wall (Assume 9 wall)?

A: With wireless video transmission devices there is a line of sight figure with no obstructions and a non line of sight figure for when there is obstructions. Non line of sight transmission is generally half that of line of sight. For short ranges such as 20 meters you should be able to have the signal pass through obstructions such as the ones you listed.

Q: 5. How long does it last on a 7.4V 4400mah battery?

A: I have not tested this yet. I plug direct to P-Tap of rig or monitor setup.

Q: 6. I would like to hear about the reliability and performance of these hdmi transmitters.

A: This product is just the antennas for the FeiDu HDMI Wireless Video Transmitter and Receiver Set, B&H # FEFWT200. B&H # FEFWT200 is an HDMI system with a 650 foot line of site range.

Q: 7. This looks like the ikan Blitz 400 3G-SDI/HDMI Wireless Uncompressed Zero Delay Video System, what's the difference?

A: Not familiar with the other, but not a fan of the Ikan stuff in general. Honestly, this has been a better piece than we expected. It also does signal conversion so you can go in SDI and come out HDMI at the other end. Order an extra antenna or two and make yourself some power adaptor cables to get to 4 pin XLR if the rest of the gear is in that world. Hope this helps. Good luck!

Q: 8. what is the range?

A: This is tested at 656 feet / 200 meters.

Q: 9. Hii have bought this piece from bh . i am using it with arri alexa but when i record my camera the video signal is not triggering my shogun inferno when the shogun is connected through ghost eye 150 v2. Do u have any solution or setting for this

A: I have no idea about this issue i am using with blackmagic and red and not facing any issue. thanks

Q: 10. Are the recievers and transmitters weatherproof ? I mean you rarely need 2000m transmission indoors.

A: This are not weatherproof products.