The orange RM-650 Large Diaphragm Condenser Microphone from Polsen is a go-to choice for broadcast and podcast projects, as well as voiceovers. The stylish and eye-catching microphone features a large and highly sensitive one-inch gold-plated diaphragm that captures vocals and instruments with detailed accuracy. The high SPL capacity, low noise, and wide dynamic range meet the demands for a clear and natural sound for both professional and project studios applications.

If you're working in an acoustically untreated room or performing on-stage, the RM-650's cardioid polar pattern picks up sound directly in front of the microphone while it rejects off-axis sound to help eliminate noise. To further ensure clean vocals, the RM-650 includes a shockmount to eliminate vibrations, a customized metal mesh pop screen to minimize disruptive vocal plosives, a reducer bushing to fit any mic stand, and a carrying case to protect the mic during transport and storage.

RM-650 Cardioid Side-Address Microphone    Microphone Suspension Crane Arm    Closed-Back Headphones    XLR Mic Cable, Shockmount, Pop Screen

Whether you record in a professional or project studio or at home, the RM-650 sets up quickly and offers a rich and natural sound for your broadcasts, podcasts, or vocals. It also sounds great on guitar.

There's no better choice than a large-diaphragm condenser microphone to deliver warm and natural audio. The RM-650's one-inch diaphragm captures lush and rich tones that make your voice sound great. Gold plating enhances the diaphragm's conductivity for a better frequency response and provides a wide and accurate sound.

The RM-650's wide frequency response translates into the RM-650's ability to accurately capture the full character and nuances of a voice or an instrument.

If you're a singer, the RM-650 can handle very-high SPL. You won't have to step back from the microphone and risk losing some of those wonderful lower frequencies that add richness to your vocals.

There's no telling what noise your mic's going to pick up until you plug it in. In acoustically untreated rooms, even minute vibrations can travel up the mic stand and create noise. The custom low-profile shockmount cradles the base of the microphone and eliminates the noise from those unwanted vibrations.

The custom pop screen minimizes the vocal pops from p and b sounds and ensures all vocal tracks aren't littered with plosives.

The rugged aluminum alloy body is capable of withstanding travel and the rigors of daily use on the road. The stylish design, form, and color give the RM-650 offers a little flair and attention.

Related Questions and Answers

Q: 1. How is this unit for connecting to a vid cam? less sync work on the back end!

A: The Zoom PodTrak P4 Portable Multitrack Podcast Recorder does not have any dedicated main outputs for sending signal to a camera or other source, however if a headphone jack output could be spared, it could in theory be used for this purpose with the proper cabling.

Q: 2. Do you have a product that goes as high as 24 bits?

A: The Zoom H6 Portable Handy Recorder (B&H # ZOH6B) will record WAV audio at 24-bit / 96 kHz and has the ability to record four mics on four tracks at the same time and it also has a built-in USB audio interface, like the Zoom PodTrak P4 Portable Multitrack Podcast Recorder.

Q: 3. Can you use this to record non podcast audio? Example for recording audio via shotgun mic for commercial video work?

A: Sure can. Plug in your microphone and use it as you would a standard mixer/recorder.

Q: 4. Can I use a broadcast headset to record and monitor? Like the Sennheiser HMD 300 which uses a 4 pin XLR

A: Yes, you can use a broadcast headset such as the Sennheiser HMD 300 with the Zoom PodTrak P4 Portable Multitrack Podcast Recorder to record and monitor audio. However, you will need to use a different cable with the headset since the 4-pin XLR cable and connector is not compatible with the mic input and headphone output on the PodTrak P4. To enable compatibility, you can use the Sennheiser Cable-II-X3K1-Gold Straight Cable with XLR & 1/4" Connectors for HMD Headsets - 6.6' (B&H # SECBLIIX3K1G) which will allow you to connect the headset mic to a 3-pin XLR input and connect the headphones to the dedicated 1/4" TRS output.

Q: 5. Is there any way to enable and configure noisegate in Zoom P4? If yes, can you do this through built controls, or do you need an app or computer program to configure it?

A: The Zoom P4 does not have a specific noise reduction option. For a recorder with built in noise reduction features, the Zoom P8 would be a better choice.

Q: 6. can I put 2 phone calls at the same time on the P4?

A: Yes, it is possible to record two phone calls at the same time on the P4.

Q: 7. Will this function as a USB audio interface?

A: Yes, the Zoom PodTrak P4 Portable Multitrack Podcast Recorder can be used as a USB audio interface (2-in/2-out).

Q: 8. Will this still need a cloudlifter?

A: Not necessary tho recommended. Providing the subject is at good volume and the room is very quiet, THe Zoom P4 will provide enough gain (70dB). Other Mic Pre-amps do provide 80 or more dB of gain. The Cloudlifter (B&H # CLCL1) provides more the only higher gain; it also improves mic performance, by lowering noise floor and matching impedance, which may lower distortion.

Q: 9. Can I use this system to livestream webinars and lectures through a computer, as the audio solution?

A: Yes, this can be used to live stream a mix of all channels.

Q: 10. Can it support 1TB SDXC?

A: Memory Card Support: SDHC (4 GB to 32 GB) SDXC (64 GB to 512 GB)